User's Manual

ManualsBrandsLee Technology Korea ManualsElectronicsPaging Transmitter

LTK-1900T

Top Button Paging System

TRANSMITTER

Instructional Manual

(Ver. 1.00)

LEE TECHNOLOGY KOREA CO., LTD.

email sales@leetek.org

website www.leetekorea.com

KOREA HEADQUARTER US OFFICE

FL. #499-2, Sang3-dong, 6040 Unity Drive

Suite L,

Wonmi-gu, Pucheon-city, Norcross, GA30071,

U.S.A

Kyunggi-do, Korea

tel +82-32-324-9838 tel +1-678-218-

0990

fax +82-32-324-9840 fax +1-678-218-

0991

Summary of content (8 pages)

PAGE 1
LTK-1900T Top Button Paging System TRANSMITTER Instructional Manual (Ver. 1.00) LEE TECHNOLOGY KOREA CO., LTD. email sales@leetek.org website www.leetekorea.com KOREA HEADQUARTER 3rd FL. #499-2, Sang3-dong, US OFFICE 6040 Unity Drive Suite L, Wonmi-gu, Pucheon-city, Norcross, GA30071, U.S.
PAGE 2
Top Button Paging System User Manual THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS : (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
PAGE 3
Top Button Paging System User Manual 1. FEATURE 1) Top Button Transmitter( LTK-1900T) z Dimension (mm): 40 x 63 x 14 z Frequency: 311 MHz z Output Power: 10mW z Modulation: AM z Button: 3 Button z Wireless setting available z Battery : alkaline (TOSHIBA) 12V 2) Repeater Transceiver (LTK-1900R) z Dimension (mm): 76 x 155 x 254 z Frequency: - Receiver: 311 MHz - Transmitter: 450 MHz ~ 470 MHz z Output Power: 0.
PAGE 4
z Button: 1 Button (Side) z Belt Type Top Button Paging System User Manual 2. SETTING 1) Top Button Transmitter number setting (with Repeater Transmitter) : To assign the identification number for each transmitter. * INSTRUCTION (1) Open the small cover on the Repeater Transmitter. (2) Place the SETTING switch on the “ON” side, and press any buttons on the Top Button Transmitter.
PAGE 5
and hold the RESET switch for 3 seconds. (Until the LED light flashes) Top Button Paging System User Manual z DIP Switch - To assign with the specific numbers for each Top Button Transmitters, you can use the DIP switch. Please refer to the Number Setting Sheet for details.
PAGE 6
Top Button Paging System User Manual 2) Top Button Transmitter number setting (with Receiver Pager) : Paring the Top Button Transmitters to each Receiver pagers. * INSTRUCTION (1) By using the side button on the Receiver Pager, you can enter to the wireless setting (paring) mode. (2) While the pager is in the setting mode, press any buttons on the Top Button Transmitter.
PAGE 7
z Wireless Setting Mode - Press the Side Button for 3 seconds on the Receiver Pager. “SET TABLE” will show on the display. Press the side button for 3 seconds, and it will be into the Table Setting Mode (“Saved None” will show on the display if no transmitters are assigned yet. If not, the number of transmitter which are already assigned will show on the display) Top Button Paging System User Manual 3. PAGING z The table number will be displayed with the alert, when it is paged.
PAGE 8