LTK-1400AHN ALPHA & SERIAL Paging System User Manual LEE TECHNOLOGY KOREA CO., LTD. email sales@leetek.org website www.leetekorea.com KOREA HEADQUARTER 3rd Fl. 499-2, Sang3-dong, Wonmi-gu, Bucheon City, US OFFICE 530 Highland Station Drive, Suite 2004, Suwanee, GA 30024, U.S.A.
NOTICE This manual, software and electronic circuitry are copyrighted. All rights reserved. Under the copyright laws, this manual, software and electronic circuitry may not be copied, in whole or in part without written prior consent of Lee Technology. All information provided in this document is carefully prepared and offered in good faith as a guide in the installation, use and servicing of our products.
IMPORTANT SAFETY INFORMATION CAUTION: To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be colocated or operation in conjunction with any other antenna or transmitter. Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
[ Alpha & Serial Transmitter Version ] Ⅰ. PREFACE Pager transmitter is the desktop paging system capable of addressing more than 1000 pagers with Alpha message or Numeric message. Ⅱ. TURNING THE TX ON/OFF & PAGER NUMBER SETUP 1. TX POWER ON/OFF * Plug the Pager Transmitter A/C Adaptor into the Pager Transmitter and then into a standard 110 outlet. * And the initial LCD screen is as below. 2. PAGER NUMBER SETUP * Press SETUP and then input operational password(2580) and then ENTER * Go to 14.
* If you want to setup the number of Numeric pagers, press "3+ENTER" * And then you should specify the range of Numeric Pagers. * For example, if you want to set 26 Numeric Pagers at the range of 41-66, input "41+ENTER+66+ENTER" * Pager Priority : Smart Call > Alpha > Numeric → It means if there are duplicated pager number, the Smart Call message is prior than Alpha and Numeric message. Ⅲ. SEND A PAGE 1. SMART CALL MESSAGE (If the pager type is set to 1.Smart Call in menu 14.
→ Before this process, Go to 4.PRE-SET MESSAGE and make PRE-SET MESSAGE:ON (1) Input corresponding pager number and then press ENTER. (2) When "Enter Pre-Set Message(1-4):" is displayed, input nothing and then press ENTER. (3) When "ENTER MESSAGE:" is displayed, input no message and then press ENTER. (4) "Sending Message Please Wait" is displayed and transmit Pre-Set Default Message. ※ To return an initial screen on the process, input CANCEL.
* GROUP CALL ID * OUT OF RANGE ID * SET BAUD RATE * PAGER TYPE SET-UP * SET Power Up MSG * STREAMING MSG 2. MENU SETUP (1) To enter menu setup mode, press SETUP in initial screen. (2) "ENTER PASSWORD?" Is displayed. (3) Input password and then Menu Options is displayed. * USER PASSWORD : 1379 * MASTER PASSWORD? : 2580 (4) Can move Menu No.1-16 using *(←) and #(→) Key. ※ To return an initial screen on the process, input CANCEL. 1) SET CURRENT TIME (1) In Menu Options, Go to 1.
(4) If you press CANCEL, range test is finished and the screen moves to Menu Options screen. ※ To return to Menu Options on the process, input CANCEL. 4) PRE-SET MESSAGE (1) Go to 4.PRE-SET MESSAGE using *(←) and #(→) Key and then press ENTER. (2) Select ON/OFF using *(←) and #(→) Key. # To set the Pre-Set Default Message. (3) "PRE-SET DEFAULT MESSAGE(1-4):" is displayed and you can input among 1-4. (4) After input preset default message then press ENTER (5) The screen returns to Menu Options screen.
(8) Then the screen moves to Menu Options. ※ To return to Menu Options on the process, input CANCEL. 7) OUT OF RANGE (1) Go to 7.OUT OF RANGE using *(←) and #(→) Key and then press ENTER. (2) "OUT OF RANGE:" is displayed and you can select ON/OFF using *(←) and #(→) Key (3) Make it "ON" and then press ENTER. (4) "Are All Pagers Returned??" is displayed and then press ENTER. (5) "Unplug All Coasters" is displayed and then press ENTER. (6) "Message Sent Plug In Pagers" is displayed and transmit Message twice.
(4) Out of Range ID is saved, and it moves to Menu Options. 13) SET BAUD RATE (1) Go to 13.SET BAUD RATE using *(←) and #(→) Key and then press ENTER. (2) "Set Baud Rate(1-3):" is displayed and you can select among 1-3 ※ Baud Rate List 1. 512BPS 2. 1200BPS 3. 2400BPS (3) Select Baud Rate and then press ENTER. (4) Baud Rate is saved and it moves to Menu Options. 14) PAGER TYPE SET-UP (1) Go to 14.PAGER TYPE SET-UP using *(←) and #(→) Key and then press ENTER.
(4) Input password(2486) and then press ENTER. (5) "Enter Streaming MSG:" is displayed and you can input first Streaming MSG and then press ENTER. (6) Then you can input second Streaming MSG and then ENTER. (7) Then you can input third Streaming MSG and then ENTER. (8) Then Message Interval is displayed and you can input the message interval. ※ Message Interval means the terms of each Streaming MSG.
③ BPS : Either 512 or 1200 BPS can be selected.