Alpha Paging System User Manual (Manual Ver. 1.00) LEE TECHNOLOGY KOREA CO., LTD. email sales@leetek.org website www.leetekorea.com KOREA HEADQUARTER US OFFICE 3rd FL. #499-2, Sang3-dong, Wonmi-gu, Pucheon-city, 6040 Unity Drive Suite L, Norcross, GA30071, U.S.
fax +82-32-324-9840 fax +1-678-218-0991 Alpha Paging System User Manual [ Alpha & Serial Transmitter Version ] Ⅰ. PREFACE Pager transmitter is the desktop paging system capable of addressing more than 1000 pagers with Alpha message or Numeric message. Ⅱ. TURNING THE TX ON/OFF & PAGER NUMBER SETUP 1. TX POWER ON/OFF * Plug the Pager Transmitter A/C Adaptor into the Pager Transmitter and then into a standard 110 outlet. * And the initial LCD screen is as below. 2.
* For example, if you want to set 20 Smart Call Pagers at the range of 51-70, input "51+ENTER+70+ENTER" Alpha Paging System User Manual 3) Numeric Pager Setup * If you want to setup the number of Numeric pagers, press "3+ENTER" * And then you should specify the range of Numeric Pagers.
Alpha Paging System User Manual 4. PRE-SET MESSAGE(in case set it ON) 1) To send the preset default message → Before this process, Go to 4.PRE-SET MESSAGE and make PRE-SET MESSAGE:ON (1) Input corresponding pager number and then press ENTER. (2) When "Enter Pre-Set Message(1-4):" is displayed, input nothing and then press ENTER. (3) When "ENTER MESSAGE:" is displayed, input no message and then press ENTER. (4) "Sending Message Please Wait" is displayed and transmit Pre-Set Default Message.
Alpha Paging System User Manual * OUT OF RANGE * TX DEFAULT MSG * SET FREQUENCY * SYSTEM BASE ID * GROUP CALL ID * OUT OF RANGE ID * SET BAUD RATE * PAGER TYPE SET-UP * SET Power Up MSG * STREAMING MSG 2. MENU SETUP (1) To enter menu setup mode, press SETUP in initial screen. (2) "ENTER PASSWORD?" Is displayed. (3) Input password and then Menu Options is displayed. * USER PASSWORD : 1379 * MASTER PASSWORD? : 2580 (4) Can move Menu No.1-16 using *(←) and #(→) Key.
(6) Select AM/PM using *(←) and #(→) Key and then press ENTER. (7) The screen moves to Menu Options screen. 3) RANGE TEST (1) Go to 3.RANGE TEST using *(←) and #(→) Key and then press ENTER. (2) "RANGE TEST" is displayed (3) Press ENTER and the range test begins. (4) If you press CANCEL, range test is finished and the screen moves to Menu Options screen. ※ To return to Menu Options on the process, input CANCEL. 4) PRE-SET MESSAGE (1) Go to 4.PRE-SET MESSAGE using *(←) and #(→) Key and then press ENTER.
(1) Go to 6.MODE SELECT using *(←) and #(→) Key and then press ENTER. (2) "Mode Select(1-3):" is displayed and you can select Mode Select# among up to 3. (3) Select Mode Select# using *(←) and #(→) Key and then press ENTER. (4) If you choose Mode Select#1, then "Mode Select #1:OFF" is displayed. (5) You can select ON/OFF using *(←) and #(→) Key and then press ENTER (6) You can set Mode Select#2,3 as same way as Mode Select#1 (8) Then the screen moves to Menu Options.
7. 462.8750 MHz 8. 464.6350 MHz 9. 467.7500 MHz 10. 467.8000 MHz (3) The frequency is saved, and it moves to Menu Options. 10) SYSTEM BASE ID (1) Go to 10.SYSTEM BASE ID using *(←) and #(→) Key and then press ENTER. (2) "SYSTEM BASE ID:" is displayed and you can input the Base ID and then press ENTER. (3) System Base ID is saved, and it moves to Menu Options. 11) GROUP CALL ID (1) Go to 11.Group Call ID using *(←) and #(→) Key and then press ENTER.
※ Smart Call 1. Press "1+ENTER" and then you can input the range of Smart Call 2. If you want to set the Smart Call Pager from 1 to 20, press "1+ENTER+20" and then ENTER. 3. The range of Smart Call is saved and then it moves to Menu Options. ※ To set the range of Alpha pager and Numeric pager is as same as Smart Call pager setting. ※ Smart Call has the priority than Alpha and Numeric.
The third Streaming Message also lasts 1 minute and then it returns to first Streaming Message. This process cycles by terms of 1 minute. (9) And then ENTER. (10) The interval of Streaming Message is saved and it moves to Menu Options. ※WARNING! When the Streaming MSG is turned "ON", a streaming MSG has to be entered. Other wise, a streaming MSG has not to be entered, if the Streaming MSG is turned "OFF" 17) SET RECEIVER (1) Go to 17.STREAMING MSG using *(←) and #(→) Key and then press ENTER.
THIS DEVIC E C O M PLIES W ITH PA RT 1 5 O F THE FC C RULES. O PERA TIO N IS SUBJEC T TO THE FO LLO W ING TW O C O NDITIO NS : (1 ) THIS DEVIC E M A Y NO T C A USE HA RM FUL INTERFERENC E, A ND (2 ) THIS DEVIC E M UST A C C EPT A NY INTERFERENC E REC EIVED, INC LUDING INTERFERENC E THA T M A Y C A USE UNDESIRED O PERA TIO N.