User's Manual

ManualsBrandsLee Technology Korea ManualsElectronicsWATCH PAGER

WATCH TYPE PAGER

(LT2005W)

OPERATION MANUAL

www.leetek.org

leetek2001@yahoo.co.kr

Lee Technology Korea.Co.,Ltd(LEETEK)

#499-2 Sang3dong, Wonmi-gu,

Puchon-city, kyunggi-do, Korea

T:82-32-324-9838/9

F:82-32-324-9840

FCC ID : QBT-LT2005W

Trade Name : WATCH PAGER

Model No. : LT2005W

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USERʼS AUTHORITY TO

OPERATE THE EQUIPMENT.

Summary of content (7 pages)

PAGE 1
WATCH TYPE PAGER (LT2005W) OPERATION MANUAL FCC ID : QBT-LT2005W Trade Name : WATCH PAGER Model No. : LT2005W THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS : (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
PAGE 2
WATCH-TYPE PAGER 1. PICTURE ① Top Button ② S ide Button 2. SPEC z 12 Segment Display z 1.5V AAA Battery Included z 2 Button Switch (Top Button, Side Button) z Vibe Alert z Maximum 12 Table Number Can Be Stored. 3. POWER ON/OFF 1) ON – Press the side Button for more than 5 seconds, and then it will be turned on. 2) OFF – Press the side button for more than 5 seconds, and then it will be turned off. 4. Time Setup 1) If you want to enter the Time Setting Mode, insert the battery.
PAGE 3
5. Enter Table Setting Mode z To enter the Table Setting Mode, press the Top Button about 2 seconds. And then it will enter the Table Setting Mode. 6. Alert Mode z When the message is received, the vibration works for 15 seconds. If you push the button, the vibration will be stopped. 7. Message Reading 1) If you press the Side Button, “Call” is displayed. 2) The received message will be displayed if you push the Side Button once more. 8.
PAGE 4
d. Check all connections on charger bases. If only one stack of coasters will not light on the charger, There is probably a bad connection. Move wires and be sure they are all plugged into back of black coaster charger. If you try all this and the coaster charging light will not come on you most likely have a blown power supply. No range on coaster pagers a. Be sure transmitter is not near any large metal objects, fire walls, etc. b. Be sure antenna is connected properly and not broken.
PAGE 5
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 6
equipment. 4.RF Radiation Exposure This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 5.Do not subject this equipment to: 1)Mechanical shock 2)Excessive humidity or moisture 3)Extremes of temperature 4)Corrosive liquids 6.
PAGE 7
I need to send some transmitter in for repair - What do I do? Within warranty period / Covered by our Product-Care Program: Ship malfunctioning components to the following address: 3rd FL, #499-2 Sang 3-dong, Wonmi-gu, Puchon-city, Kyunggi-do, Korea Tel: 82-32-678-8605 Fax: 82-32-324-9840 1. Pack the components securely 2. Enclose a note with a brief description of the problem 3. Include a business card 4. Ship the equipment in a traceable manner for your protection. (ie UPS ). 5.