-BZDBMM QBHFS 5. G G G “Playcall paging system Operating Instructions” G G G s{TYWWX|nG G G www.leetek.org leetek2001@yahoo.co.kr Lee Technology Korea.Co.
Playcall User’s manual Thank you for purchasing the“ LTK-1100 transmitter & Game paging system”. We are confident our cutting edge products and first rate service will satisfy your needs for years to come. Please read this these instructions carefully before setting up your Guest Paging system! EQUIPMENT SETUP Keypad Sending Unit: Unwrap all sending unit components. Lock the antenna into the hole in the upper right hand Corner of the sending unit.
System Programming(Transmitter Version 1.03): To enter programming mode, press the “SETUP” button and enter the password “1379” followed by “enter”. If the password is accepted, the display will show “use * to scroll to menu options”. (Use the “ / Menu” key to scroll through the different menu options or press “CANCEL” to exit the system programming menu.) 1. Set the Current Time x At the “Set Current Time” menu, set the hour then press “ENTER” key. x Set the minutes and press “ENTER” key.
x x x x At the “Set Pager Alert ” menu, press the “#/Select” key to scroll through the different alert options. After making a selection, press the “enter” key 3 times. After sending the code, the coasters will now respond with your new selection. Press “CANCEL” key to exit the system programming menu Return all the coasters to the charging base or plug the power supply. The coasters are ready to receive the page with the new alert. (Factory Default: OFF) 5.
the transmitter. After 45 – 60 seconds, all the coasters will play a melody since they are not receiving a signal from the transmitter. Plug in the power supply back into the transmitter. After a few seconds, all coasters will stop playing the melody. Return all the coasters to the charging base or plug the power supply. The coasters are ready to receive the page with the out of range feature turned on.
To turn the Out of range feature an follow these procedures: Remove all the coasters from the charging base or simply unplug the power supply that is connected to the charging unit. Press “911-enter- 9494-send”. All the coasters will light up to tell you that they have received the new code. To test the coasters, unplug the power supply that is connected to the LEETEK transmitter. After 30 seconds, all the coasters will play a melody since they are not receiving a signal from the transmitter.
Playcall Pager Sign Out Sheet Returned () Coaster # Name Time *Getting a phone number encourages the guest to return the coaster! *Phone #
Playcall Paging System Operation 1. When a guest arrives, remove a coaster from the stack. It will alert for 10 seconds while you show them and explain what they will be looking for when they are paged. Write the coaster number next to the person's name on the wait list. 2. When their table becomes available, simply enter their coaster number into the transmitter and press "send". Example of Host/Guest Greeting Host: Good evening Sir. Welcome to ______________.
Before you call, try some of the following suggestions… *Remember that the capability of your system will be affected by: Foil backed wallboard, Metal mesh, wire reinforced glass, metal sheeting, large mirrors, suspended ceilings, lift shafts etc. These can all reflect and thereby reduce the signaling capability of the transmitter. A little forethought prior to installation, coupled with a few tests, can normally avoid most of these problems.
I need to send some Coasters / Pagers in for repair - What do I do? Within warranty period / Covered by our Coaster-Care Program: Ship malfunctioning components to the following address: #499-2, Sang3dong, Wonmigu, Puchoncity, kyunggido, Korea 1. Pack the components securely 2. Enclose a note with a brief description of the problem 3. Include a business card 4. 5. Ship the equipment in a traceable manner for your protection. (ie UPS Ground Track). Insure the shipment for replacement value.
seated. Benefits of a VISUAL paging system Bartenders see the pager or coaster flash and know to quickly close the tab of a waiting guest to help speed table turns. Host staff can page a guest, see them coming (with flashing pager / coaster in hand) and greet them by name or meet them halfway. Pagers / coasters are not lost or forgotten in the pockets of your guests.
