TELECRANE® F24 Series Operating Instructions TELECRANE® Lee’s Hi-Tech Ent. Co., Ltd.
Table of Contents ! Warranty & Precautions of Operation..………….………..
F24 Warranty & Precautions of Operation FCC Caution: "Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment." Warranty Lee’s Hi-Tech Enterprises Co., Ltd. guarantees that this product meets its published specifications at the time of shipment from the factory. Under proper installation it should work as expected.
Normal (Annex I) Definition of Function T i l Toggle ON/OFF Inching Interlock Non-Interlock Dual Motor The relative relay is “ON” when the pushbutton is pressed and held; and relay is “off” when the pushbutton is released. Maintained function: the relay is operated by pressing and releasing; press and release again to turn off the relay. Both pushbuttons are used to operate the same relay. Press the ON pushbutton to activate the relay and press the OFF pushbutton to de-activate the relay.
direction. Therefore the interlocked delay time could potentially prevent it. Normally, the interlocked delay time should be larger than the duration of crane stop. Bypass EMS Control By EMS ID-Code Remote Setting Power Saving Power-On Mode Transmit Mode Save Power Auto-OFF(TX) LED ON/OFF LED OFF-Time Passive Act “Bypass EMS” means that the relay relating to pushbutton will not be controlled by EMS mushroom or emergency stop signal.
all the relays under “NORMAL” function and “Control by EMS” including MAIN relay. The receiver must be restart to operate again, follow the “Power-On” procedure to restart the system. AUTO OFF RX This function refers to turn off receiver after a given idle time. Receiver MAIN relay will be turn off automatically. Normally this function is cooperated with “non-continuous transmitting”mode to prevent any unintentional radio.