Spec Sheet

800-231-1414 • 631-231-1414
155 Adams Avenue • Hauppauge, NY 11788-3699
Fax [phone] • www.LEEDAN.com
INTERCOMS • MAILBOXES • DIRECTORIES
NURSE-CALL • ANNUNCIATORS • WIRE & CABLE
With continuous product improvement, specifications are subject to change without notice.
TM
Innovations in Communications
since 1955
© 2012 LEE DAN
®
Communications, Inc. IN-464 (7/12)
STAINLESS STEEL APARTMENT STATIONS
Two-Tone Style With Black Plungers
IR-464 (shown smaller than actual size)
Mounting Methods
Flush: Use Lee Dan IH-101B (box),
or IH-102 (ring).
Surface: Use Lee Dan OH-700 black box.
Screws: Two (2) Scrulox mounting screws are
included. Use model SC-1 Scrulox driver
to install.
Other Popular Stainless Steel Stations
IR-464
APPLICATION
IR-464 stainless steel, flush mount apartment stations are sized to
fit conventional Lee Dan mounting hardware. Installation is fast,
and maintenance is minimal, to save you money.
Choose IR-464 for projects requiring all metal construction, or
wherever vandalism is a problem. IR-464 is ideal for city
housing projects, transient residencies, dormitories, and jails, or
wherever durability and long service life is desired.
SPECIFICATIONS
Suite stations shall be Lee Dan model IR-464 or approved equal. Momentary
action, self-wiping pushbuttons shall be provided for TALK, LISTEN, and
DOOR operations. Pushbutton connections must be made by positive screw
terminals by circuit board. Pigtail connections are not acceptable. Stations
shall be permanently stamped with TALK/LSTN/DOOR legends for tenant
operation. The speaker/microphone shall be a mylar cone high sensitivity type
with voice-frequency response. Paper cone speakers are not acceptable.
Speaker shall be protected by a double metal speaker baffle. Station shall be
constructed of 18 gauge stainless steel. Mounting screws shall be tamper
resistant Scrulox type.
Size: 6 7/8"H, 5"W, 1 1/4"D. Projects only 3/16" from
mounting surface.
Holes: Two (2) horizontal holes, to fit Lee Dan models
IH-101B, IH-102 and OH-700 hardware.
Controls: Individually replaceable Talk, Listen and Door
Release self-wiping buttons. Buttons are pro-
tected by
3/8" thick solid aluminum engraved
plungers.
Finish: Flat, 18 Gauge Stainless Steel.
Speaker: 3
", 1 Watt, 45 Ohm. Heavy duty magnet
with voice-frequency response. Also used for
electronic tone signal from the lobby panel.
Baffle: Double metal speaker baffle.
Amplifier: Use Lee Dan model PK-543A.
Wiring Requirements
IR-464 4 Wires: 3 Common (twisted) + 1 Selective 22AWG.
IR-465 5 Wires: 4 Common (twisted) + 1 Selective 22AWG.
IR-463 3 Wires: 2 Common (twisted) + 1 Selective 22AWG.
Use existing wiring if electrically sound.
IR-444SS IR-464BR
Surface Mount Solid
Version With Polished Brass
Round Buttons Metal Plungers