Spec Sheet

800-231-1414 631-231-1414
155 Adams Avenue Hauppauge, NY 11788-3699
Fax 631-231-1498 www.LEEDAN.com
INTERCOMS MAILBOXES DIRECTORIES
NURSE-CALL ANNUNCIATORS WIRE & CABLE
With continuous product improvement, specifications are subject to change without notice.
TM
Innovations in Communications
since 1955
© 2012 LEE DAN
®
Communications, Inc. IN-464B (10/12)
SOLID POLISHED BRASS APARTMENT STATIONS
Two-Tone Style With Black Plungers
IR-464BR (shown smaller than actual size)
Mounting Methods
Flush: Use Lee Dan IH-101B (box),
or IH-102 (ring).
Surface: Use Lee Dan OH-700 black box.
Screws: Two (2) Scrulox mounting screws are
included. Use model SC-1 Scrulox driver
to install.
Other Popular Stainless Steel Stations
IR-464BR
APPLICATION
IR-464BR two-tone, Brass/Black flush mount apartment stations
are sized to fit conventional Lee Dan mounting hardware. Installa-
tion is fast, and maintenance is minimal, to save you money.
Choose IR-464BR for projects requiring distinctive, unconven-
tional brass styling. IR-464BR is ideal for luxury or historic
housing, or wherever form is valued as much as function.
SPECIFICATIONS
Suite stations shall be Lee Dan model IR-464BR or approved equal. Momen-
tary action, self-wiping pushbuttons shall be provided for TALK, LISTEN, and
DOOR operations. Pushbutton connections must be made by positive screw
terminals by circuit board. Pigtail connections are not acceptable. Stations shall
be permanently stamped with TALK/LSTN/DOOR legends for tenant
operation. The speaker/microphone shall be a mylar cone high sensitivity type
with voice-frequency response. Paper cone speakers are not acceptable.
Speaker shall be protected by a double metal speaker baffle. Station shall be
constructed of .062 solid polished brass. Mounting screws shall be tamper
resistant Scrulox type.
Size: 6 7/8"H, 5"W, 1 1/4"D. Projects only 3/16" from
mounting surface.
Holes: Two (2) horizontal holes, to fit Lee Dan models
IH-101B, IH-102 and OH-700 hardware.
Controls: Individually replaceable Talk, Listen and Door
Release self-wiping buttons. Buttons are protected
by
3/8" thick solid aluminum engraved plungers.
Finish: Unlacquered**, .062 Solid Polished Brass.
Unlacquered finish will oxidize and show finger prints.
**Lacquer finish available as custom item.
Speaker: 3
", 1 Watt, 45 Ohm. Heavy duty magnet
with voice-frequency response. Also used for
electronic tone signal from the lobby panel.
Baffle: Double metal speaker baffle.
Amplifier: Use Lee Dan model PK-543A.
Wiring Requirements
IR-464BR 4 Wires: 3 Common (twisted) + 1 Selective 22AWG.
IR-465BR 5 Wires: 4 Common (twisted) + 1 Selective 22AWG.
IR-463BR 3 Wires: 2 Common (twisted) + 1 Selective 22AWG.
Use existing wiring if electrically sound.
IR-444BRQ IR-464
Surface Mount Stainless Steel
Solid Brass Black
Round Metal Plungers
Chrome Buttons

Summary of content (2 pages)