User Manual
● Touch panel 4 zone 1-5 color RF remote.
● Each zone can remote control multiple RF 2.4G LED controllers.
● Ultra sensitive high strength glass touch panel with touch color slide in the middle.
● Smooth and accurate color adjustment by touching the color slide.
● Touch keys with chord tones and LED indicator.
● Free installation, no wiring, removable.
● AAA x 2 attery powered.b
● White & Black glass panel available.
User Manual Ver 1.1.0
Model No.: T21,T22,T24,T25
4 Zone/1-5 color/Glass touch panel/Color slide/Wireless remote 30m distance/AAA x 2 battery
Features
Page 1
Mechanical Structures and Installations
Wall Mounted Touch Panel
LVD RED
T24
T22T21
Typical base as below:
European style
86 size
Touch panel Baseplate
Base
Uninstall
Installation diagram:
T25
T21,T22,T24,T25 Wall Mounted Touch Panel
4 Zone dimming
4 Zone CCT
4 Zone RGB/RGBW
4 Zone RGB+CCT
Technical Parameters
Warranty
5 years
Warranty
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
T c:
+65
O
C
Match with RF LED controller (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press zone
key of the touch panel.
The LED indicator fast flash a few times
means match is successful.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on power,
repeat again.
Immediately short press zone key 3 times on the touch panel.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power of the receiver, then switch on power,
repeat again.
Immediately short press zone key 5 times on the touch panel.
The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key for 5s to delete all match.
The LED indicator fast flash a few times
means all matched remotes were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
86.00 mm
86.00 mm
61.00 mm
61.00 mm
20.50 mm
Installation rack
Battery compartments
To fix the panel, two options are offered for selection:
Option 1: fix it on the wall with two screws.
Option 2: adhere it to the wall with paster.
Weight
156g
Gross weight
Net weight
192g
Safety and EMC
EMC standard (EMC)
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED)
ETSI EN 300 328 V2.2.2
Certification
CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Input and Output
Output signal RF 2.4GHz( )
Working voltage 3VDC AAA x 2( )
<5mA Without tune( )
<20mA with tune( )
Standby current <20μA
Standby time 1 year
Remote distance 30m (Barrier-free space)
Working current