Installation Instructions

Model:Bluetooth Remote Control Type A

Input:DC 3V

Press the middle button of the remote control, the indicator light will be on,When the amount of points is sufficient, the indicator light is green.

When the amount is insufficient, the indicator light is red, reminding the need to replace the battery

Step 1: Pry open the battery compartment

Step 2: Remove the battery compartment

Step 3: Remove the battery and install a new CR2032 battery

Part 4: Plug the charging compartment back

1. Download the LEDLENSER APP in the mobile phone application market,

add a Bluetooth device to the APP, long press the middle button of the

remote control to connect to Bluetooth

PAGE 1
Step 1: Pry open the battery compartment Step 2: Remove the battery compartment Step 3: Remove the battery and install a new CR2032 battery Part 4: Plug the charging compartment back 1.
PAGE 2
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.