Ledger Nano X Bluetooth enabled Hardware Wallet User Manual
Table of Contents Table of Contents 1 Version control 5 Check if device is genuine 7 Set up as new device 11 Restore from recovery phrase 13 Access Control Center 14 Secure your PIN & recovery phrase 15 Receive crypto assets 18 Send crypto assets 19 Verify transaction details 20 Receive mining proceeds 21 Set auto-lock and power off 24 Set up Bluetooth connection 25 Change your PIN code 26 Advanced passphrase security 26 Maximize battery life 29 Export your accounts 30 Fix
Version control Version Date Comments 1.0 07-03-2019 First issue for publication.
Getting Started 3
Check if device is genuine Ledger products are built around a combination of hardware and software security, meant to protect your private keys from a wide range of attacks. Use this guide to make sure your Ledger Nano X is genuine, and not fraudulent or counterfeit. A few simple checks will assure you that your device is a genuine Ledger product: ✓ ✓ ✓ ✓ Origin of the Ledger product Box contents Condition of the Recovery sheet Initial state of the Ledger device.
Ledger Nano X box contents Check the Recovery sheets came blank Once you set up your Ledger Nano X, it will generate a new 24-word recovery phrase for you to write down on a Recovery sheet. If someone else were to know your recovery phrase, you can lose all your crypto assets. Follow the guidelines below to ensure the security of your assets: ● Make sure your Recovery sheets came in blank. ● If your Recovery sheets already have words on them: The device is not safe to use.
Blank Recovery sheet Check for factory settings ● ● ● When turning on your Ledger Nano X for the first time, it should display the Ledger Logo, then release the button and then Welcome to Ledger Nano X Press right to continue. Ledger never provides a PIN code in any way, shape or form. Always choose the PIN code yourself. If a PIN code is included in the packaging or instructions to get one elsewhere, or if the device requires a PIN code the first time you use it: the device is not safe to use.
Ledger Nano X: Welcome Check authenticity with Ledger applications ● ● ● Set up your Ledger device with Ledger Live to verify its authenticity. Genuine Ledger devices hold a secret key that is set during manufacture. Only a genuine Ledger device can use its key to provide the cryptographic proof required to connect with Ledger’s secure server. Summary ✓ Check your Recovery sheets came in blank. ✓ Set up your Ledger Nano X by yourself.
contain a secure chip that prevents physical tampering: this provides stronger security than any sticker possibly could. Hardware integrity check Advanced users can check the hardware integrity on the inside of their Ledger device. This article provides a non-exhaustive chronology of the different revisions of the Ledger Nano X build. Please be aware that normal usage does not involve opening your Ledger device. Proceed to do so at your own risk.
4. Enter the PIN code again to confirm it. Security tips ● ● ● ● Choose your own PIN code. This code unlocks your device. Use 8 digits for optimal security. Never use a device supplied with a PIN code and/or a recovery phrase. Contact Ledger Support in case of doubt. Step 3. Save your recovery phrase Your 24-word recovery phrase will now be displayed word by word on the Ledger Nano X screen. Be careful, your recovery phrase will be displayed only once. 1. Take the blank Recovery sheet supplied in the box.
Restore from recovery phrase Restore a Ledger Nano X device from your recovery phrase to restore, replace or clone a device. The Ledger Nano X will recover the private keys backed up by your confidential recovery phrase. Alternatively, set up as a new device to generate new private keys and write down a new recovery phrase. What you'll need ✓ Ledger Nano X. ✓ Get the recovery phrase to restore. BIP39/BIP44 recovery phrases are supported.
Step 3. Enter your recovery phrase 1. Choose the length of your recovery phrase (12, 18 or 24 words). Press both buttons to validate. 2. Enter the first letters of Word #1 by selecting them with the right or left button. Press both buttons to validate each letter. 3. Choose Word #1 from the suggested words. Press both buttons to validate it. 4. Repeat the process until the last word of your recovery phrase. 5. Your device is ready is shown once you've successfully completed the setup process.
3. Validate a selection by pressing both options. ○ Battery: current charge level. ○ Lock device: Press both buttons to show screen saver. Require the PIN to unlock. ○ Bluetooth: Shows device name when Bluetooth is enabled. Press both buttons to disable or enable Bluetooth connectivity. ○ Settings: Press both buttons to enter the Settings. ○ Power off: Press both buttons to power off. ○ Close: Return to the previous activity. Learn more ● ● ● Learn about charging the battery.
Secure your 24-word recovery phrase The 24-word recovery phrase is the only backup to your crypto assets. ALWAYS ● ● ● Ensure your 24-word recovery phrase is obtained from the device screen. Create multiple written copies of the recovery phrase. Store the copies of the recovery phrase in secure locations, out of sight. NEVER ● ● ● Enter the 24-word recovery phrase into your computer or phone. Take a picture of the 24-word recovery phrase. Share your recovery phrase with anyone else.
Send & Receive 14
Receive crypto assets You can receive crypto assets on accounts managed by your Ledger Nano X device by generating a receive address in the Ledger Live app. Security tip Always send a small amount first. Then verify that the transaction was properly received by the recipient address before proceeding to send larger amounts. Before you begin ✓ Ledger Live should be ready to use. ✓ Check that the right app is installed on your Ledger Nano X. Ex: install the Bitcoin app to receive Bitcoin. Instructions 1. 2.
Why receive addresses change You've generated an address for the selected account, that you can share with the sender. ● Blockchains based on Bitcoin are public networks. For optimal privacy, the addresses of those crypto assets should generally not be re-used after a transaction. ● Ledger Live generates new addresses for crypto assets based on Bitcoin. ● For crypto assets based on Bitcoin, the previous addresses do remain valid, but they don't offer an optimal level of privacy.
5. Carefully verify all transaction details on your device. 6. Press both buttons to validate the transaction if everything is correct. The transaction is then signed and sent to the network for confirmation. 7. Click View operation details to track the transaction until it gets confirmed. Countervalue The countervalue you enter is converted to the amount of the crypto asset to send through an intermediary exchange to Bitcoin using the exchange rate providers selected in Settings.
Unverified addresses Even if Ledger Live can provide receiving addresses without a Ledger device, these addresses provide suboptimal security. Choosing to use unverified addresses comes at your own risk. Learn more ● ● ● Learn how to secure your PIN code and recovery phrase. Check the advanced security features supported by Ledger devices. Contact Ledger Support when in doubt.
● Alternatively, import your 24-word recovery phrase into a software wallet, preferably an offline one, and empty your wallet into an address that is derived from a newly generated seed. Batch transactions to prevent problems ● ● Set up a software wallet that receives the small payments; Regularly batch these proceeds into a larger transaction to send onto a hardware wallet.
More features 20
Set auto-lock and power off Set auto-lock or auto-power off to automatically lock or shutdown your Ledger Nano X device after a period of inactivity. The PIN code is then required to unlock it. It is recommended to enable auto-lock or auto-power off for optimal security. Instructions Enable auto-lock 1. 2. 3. 4. 5. 6. Turn on and unlock your Ledger Nano X. Hold both buttons to access Control Center. Navigate to Settings. Then press both buttons to validate.
Set up Bluetooth connection Set up an encrypted Bluetooth connection between your Ledger Nano X device and Ledger Live on your smartphone to manage your crypto assets on the go. Alternatively, Bluetooth can be disabled to connect via USB only. Bluetooth pairing Pair your Ledger Nano X the first time you set it up with your smartphone. 1. Make sure Bluetooth is enabled on your smartphone and on your Ledger Nano X. Start the pairing in Ledger Live mobile. 2.
The PIN code of your Ledger Nano X device prevents unauthorized access to your crypto assets. Your PIN code is chosen when you first set up the device, but you can change it at any time. Before you start ✓ Your device is set up and runs the latest firmware. ✓ Check our article on PIN code and recovery phrase security. Instructions 1. 2. 3. 4. 5. 6. 7. Turn on and unlock your Ledger Nano X. Hold both buttons to accesss Control Center. Navigate to Settings > Security > Change PIN.
The 24-word recovery phrase saved during initial setup of your Ledger hardware wallet fully backs up the private keys providing access to your accounts. You must store it in a secure place. ● The passphrase is essentially a password added to your 24-word recovery phrase that provides access to a whole new set of accounts. ● The passphrase protects your crypto assets if your 24-word recovery phrase were to be compromised.
1. Choose Attach to PIN option from the Passphrase menu in the device security settings. 2. Press both buttons to validate Set secret passphrase. 3. Create a secondary PIN code. 4. Re-enter the secondary PIN code to confirm it. 5. Choose and confirm a secret passphrase (max 100 characters). 6. Enter your primary PIN code to validate. 7. Your device will continue managing the accounts based on your recovery phrase without passphrase.
b. Attach to PIN code: You can choose any PIN code, but you need to enter the passphrase you've set up earlier to access the accounts protected by that passphrase. Passphrase security in practice Plausible deniability To protect yourself in case of physical threat, make sure your primary PIN code unlocks only a minor part of your crypto assets. Then set up a passphrase attached to a PIN code and store more significant amount of crypto assets on the passphrase-protected accounts.
Maximize battery lifespan If you intend to store your Ledger Nano X for longer periods, the battery lifespan is best preserved by charging fully once every few months. Once fully charged, turn off the device and store it in a cool, moisture-free place. It's best not store your Ledger Nano X for a prolonged period on a very low charge, since this may negatively affect battery capacity. End of life The battery is designed to last 5 years. Ledger does not provide a battery replacement program.
● Ledger HW.1 Arbitrary list of third-party software wallets Software wallet security Software wallets are highly insecure, have not been subjected to a security audit by Ledger and they should only be used for recovery as a last resort. If you proceed to use one of the software wallets below, you accept the responsibility for any possible outcome.
Troubleshooting 29
Fix connection issues If you encounter connection issues when trying to connect your Ledger hardware wallet, try the following solutions one by one. Mac, Windows or Linux 1. Close other applications (Ledger apps, crypto wallets, Geth, Parity, Mist, Bitcoin Core, etc). 2. Turn OFF VPN and anti-virus. 3. Change the USB cable if possible 4. Try different USB ports. 5. Restart your computer. 6. Try another computer. If the problem persists, please select your system below.
● Check if the plugdev group exists by entering the command: cat /etc/group | grep plugdev ● Follow the steps below if the previous command did not return a result 1. Create the plugdev group: sudo groupadd plugdev 2. Check if you are in the group plugdev with the command: groups 3. If the output does not contain plugdev, you are not in the plugdev group. Enter the command: sudo gpasswd -a plugdev 4. Note: replace by your username, e.
Try each of the following three options. ● Option 1 Edit the file /etc/udev/rules.d/20-hw1.rules file by adding the OWNER="" parameter to each line, where is your Linux user name. Then reload the rules as follows: udevadm trigger udevadm control --reload-rules Retry the connection with Ledger Live. If it does not work, try the next option. ● Option 2 Edit the /etc/udev/rules.d/20-hw1.
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2581", ATTRS{idProduct}=="4b7c", MODE="0660", TAG+="uaccess", TAG+="udev-acl" SUBSYSTEMS=="usb", ATTRS{idVendor}=="2581", ATTRS{idProduct}=="1807", MODE="0660", TAG+="uaccess", TAG+="udev-acl" SUBSYSTEMS=="usb", ATTRS{idVendor}=="2581", ATTRS{idProduct}=="1808", MODE="0660", TAG+="uaccess", TAG+="udev-acl" SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{idProduct}=="0000", MODE="0660", TAG+="uaccess", TAG+="udev-acl" SUBSYSTEMS=="usb", ATTRS{idVendor}=="2c97", ATTRS{id
Forget Ledger Nano X on your smartphone 1. Open the Bluetooth settings of your smartphone. 2. Select specific settings for your Ledger Nano X. 3. Forget the device. Now you can set up the pairing again by choosing your Ledger Nano X at any point in Ledger Live mobile that requires a device connection, for instance in the Manager tab.
If you do lose your Recovery sheet 1. Immediately send all your crypto assets to temporary accounts, like an exchange service or another hardware wallet. 2. Enter three wrong PIN codes to reset your Ledger Nano X. 3. Set up your Ledger Nano X as a new device. 4. Then transfer back your crypto assets to your newly configured device. Reset to factory settings Resetting the device to factory settings removes all private keys, applications and settings from your Ledger Nano X device.
3. The device will reset after the third incorrect attempt as a security measure. Next steps You've successfully reset your device to factory settings. You can either: ● Learn how to set it up as a new device to generate and backup new private keys. ● Alternatively, restore your device from a recovery phrase to restore the private keys associated to an existing recovery phrase.
Use, Care and Regulatory Statement EN Please handle your Ledger Nano X with care. It includes a battery and other sensitive components. The Ledger Nano X is not waterproof. Make sure you use it in a dry environment and keep it away from any liquids. In case it gets wet, clean it with a soft, dry, lint free cloth. This product is not a toy, make sure you keep it away from children.
De Ledger Nano X is ontworpen om (i) te werken met zijn vooraf geïnstalleerde besturingssysteem (BOLOS) en de Ledger Live-toepassing en om (ii) te werken met een compatibele mobiele telefoon via draadloze Bluetooth®-technologie en met een compatibele computer via de USB-kabel. Wijzigingen aan dit product die niet uitdrukkelijk door Ledger zijn goedgekeurd, kunnen de naleving van de testnormen en het gebruiksrecht van de gebruiker tenietdoen. ES Rogamos utilice su Ledge Nano X con cuidado.
部品が含まれています。Ledger Nano X は防水仕様ではありません。必ず乾燥した環境で使用し、液 39
体に近づけないようにして保管してください。濡れてしまった場合は、柔らかく乾いたリントフリー の布で拭いてください。この商品はおもちゃではありませんので、お子様の手の届かないところに保 管してください。 Ledger Nano X は、(i) プリインストールされたオペレーティングシステム (BOLOS) と Ledger Live アプリケーションとともに使用するよう設計されており、(ii) Bluetooth®ワイヤレスを搭載し、互換 性のある携帯電話、そして或いは付属のUSBケーブルで互換性のあるコンピュータとも組み合わせて ご利用いただけます。 Ledgerによって明確に承認されていない方法以外の方法で本製品の変更または改造を行うと、商品テ スト基準への準拠が無効となり、ユーザーの使用権限が否定される可能性があります。 ZH 由于Ledger Nano X内部包含电池和其他敏感部件,请您小心操作和使用您的Ledger Nano X。 Ledger Nano X不具备防水功能,所以请务必在干燥的环境下使用,并且远离任何液体。如被打湿,请 使用柔软干燥的无绒布进行清洁。本产品非玩具,存放和使用时请务必远离儿
DE Der Hersteller, Ledger SAS (1, rue du mail – 75002 Paris – Frankreich) erklärt hiermit, dass der Ledger Nano X die Anforderungen der Richtlinien 2014/53/EU und 2011/65/EU erfüllt.
vollständige Text der europäischen Konformitätserklärung, einschließlich des Frequenzbands des Produkts und der höchstzulässigen Hochfrequenzleistung ist abrufbar unter: ledger.com/legal IT Il fabbricante, Ledger SAS (1, rue du mail - 75002 - Parigi - Francia), con il presente dichiara che il Ledger Nano X è conforme alle direttive europee RED e RoHS2.
Veuillez noter que la batterie lithium-polymère incluse dans votre Ledger Nano X devra être déposée séparément de l’appareil pour une gestion appropriée des déchets. Veuillez nous contacter à support@ledger.com pour obtenir les instructions permettant le retrait de la batterie en toute sécurité. DE Dieses Symbol zeigt an, dass Ihr Produkt gemäß den vor Ort geltenden Gesetzen nicht mit dem Hausmüll, sondern separat zu entsorgen ist.
Observe que a pilha de polímero de lítio incluída no Ledger Nano X deve ser depositada separadamente do aparelho para gestão adequada dos resíduos. Fale conosco via support@ledger.com para obter instruções para remoção segura da pilha. US and Canada Regulatory Statements This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d'exposition aux rayonnements FCC/ISDE établies pour un environnement non contrôlé.
How to access regulatory information on the Nano X 1. Rotate the swivel cover. 2. Press and hold the button next to the USB port until the menu list appears. 3. Press the right button once to select Regulatory info in the boot menu. 4. Press both buttons simultaneously to access Regulatory info. 5. Press the right button to display all information.