User's Manual
RMP195
19 INCH RACK MOUNT
TECHNICAL DATA
• Machined aluminum construction
• Secure retaining clamp
• Openings for front to rear coaxial cable
routing
• Rocker switch for master power supply
• Fits Lectrosonics IFBT4 transmitters and
UCR411/A receivers
1 November 2017
581 Laser Road NE • Rio Rancho, NM 87124 USA • www.lectrosonics.com
(505) 892-4501 • (800) 821-1121 • fax (505) 892-6243 • sales@lectrosonics.co
m
Up to four IFBT4 transmitters or UCR411/A receivers
can be rack mounted in a 1RU space. The units are
retained by an aluminum bar to keep them in place,
even in rough mobile applications.
Power from an external supply can be routed through
a rocker switch on the front panel to provide a conve-
nient master power switch.
Openings in the front panel allow cabling to be routed
from front to rear, or vice versa, for a variety of anten-
na and power mounting options.
Specifications
Dimensions:
Width: 19.000 in. (482.6 mm)
Depth: 6.375 in. (161.9 mm)
Height: 1.750 in. (44.5 mm)w
Weight: 1.24 lbs. (20 ozs.)
Optional Panel Blank
P/N 26289 Aluminum blank panel fills opening of un-
used slot; same finish as the RMP195 front panel