Specification

CERTIFI C A T E O F C O M PL I A N C E
Certificate Number
20171128-E364477
Report Reference
E364477-20131024
Issue Date
2017-NOVEMBER-28
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 2
Issued to:
Zhangjiagang Uchen New Energy Technology Co., Ltd.
No.999 Yongjin Rd, Miaoqiao, Tangqiao Town,
Zhangjiagang, Jiangsu 215611 CHINA.
This is to certify that
representative samples of
COMPONENT - ELECTRIC VEHICLE PLUGS,
RECEPTACLES AND COUPLERS
See Addendum Page for Models/Product
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
UL 2251, Plugs, Receptacles, and Couplers for Electric Vehicles.
CSA C22.2 No. 282-13, Plugs, Receptacles, and Couplers for
Electric Vehicles.
Additional Information:
See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog
number, model number or other product designation as specified under “Marking” for the particular
Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products
that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark:
, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is
required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual
recognitions.
Recognized components are incomplete in certain constructional features or restricted in performance
capabilities and are intended for use as components of complete equipment submitted for investigation rather
than for direct separate installation in the field. The final acceptance of the component is dependent upon its
installation and use in complete equipment submitted to UL LLC.
Look for the UL Certification Mark on the product.