User's Manual

4
5
6
7
Nano
User Guide
After each trigger or test trigger, the Nano will
indicate its battery level by blinking
1, 2, 3, or 4 lights.
Approximate
Battery Level
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
100%
75%
50%
25%
Touch Sensitive Buttons
Your new RadioPopper Nano features touch
sensitive buttons. There is no need to “press”
on the unit. Simply touch your nger to the
button area.
Touch and hold POWER/TEST to turn the
unit on or o.
Power Saving Mode
In the unlikely event your Nano is left on or
is accidentally powered on when not in use,
several power saving features have been
included in both the transmitter and receiver
units. These features will automatically power
down the Nano to prevent unintentional
drain of battery.
Guide Contents
Battery Level Indicator . . . . . . . . . . . . . . .
Touch Sensitive Buttons . . . . . . . . . . . . .
Power Saving Modes . . . . . . . . . . . . . . . .
Transmitter Auto Power O . . . . . . . . . .
Receiver Auto Power O . . . . . . . . . . . . .
RadioPopper Support . . . . . . . . . . . . . . .
Nano Specications . . . . . . . . . . . . . . . . .
FCC & IC Statements . . . . . . . . . . . . . . . . .
4
5
6
7
8
9
10
11
NANO
1 2 3 4
CHAN
SET
POWER
TEST
Double Tap:
Change Channel
Touch & Hold:
Power On/O
Single Tap:
Test Trigger
Light blinks to indicate channel
Transmitter Auto Power O
If your Nano transmitter is not triggered
or test red for more than one hour, it will
automatically power down. If you trigger
the Nano transmitter after this power down
(by taking a picture with your camera for
example), the Nano will automatically power
up and resume normal operation.