User's Manual

Jr2 Transmitter
Quick Start Guide
Click
1 2 3 4 P
P Button
- Press and hold to power on/o
- Tap to test re
Lighting Power Levels
The Jr2 Transmitter is the most intuitive and
easy to use lighting control device available.
Click the dial inward to index between active
groups. Turn dial to adjust value when frame
is around desired group.
When all groups are framed, all groups may be
adjusted at the same time by the same value.
When the lock is selected, any accidental
movement of dial will not adjust power levels.
Adjust Menu Settings
PRESS and HOLD dial to enter menu mode.
Click dial to move between options
Rotate dial to make selection
Channel: Set RadioPopper channel 1 to 16
Stops: Adjust by 1/3 or 1/10 stops. In percent
mode, this changes between 1% and 5%
adjustment intervals.
Each group can be set to adjust by linear
percent (similar to a JrX Transmitter dial) or
more accurately by EV stops.
SAVE and Recall Settings
The Jr2 Transmitter includes 4 memory loca-
tions to be used to store 4 complete lighting
setups including all values and settings.
Stored information includes the %/EV setting
of each group, which groups are active, and
whether the unit is set for 1/10 stop or 1/3
stop adjustments.
The RadioPopper radio channel (1-16) is not
stored in the memory locations.
How to Save/Recall
To save your present settings to a given memory
location, simply press and hold the group button
(1~4) corresponding to the memory location.
After 2 seconds the word “SAVE” will blink along
with the chosen location. Your settings are now
stored.
To recall previously saved settings, press and
hold Dial inward for 2 seconds. While the
“SAVE” icon is blinking, press and hold the group
button (1~4) for 1 second corresponding to the
memory location you wish to recall. Your set-
tings will be recalled from the memory location.
1~4 Buttons
- Toggle group on/o
- Save/Recall SAVE settings
Dial
- Press and hold for MENU
- Click to index, Rotate to set value
TRANSMITTER Jr2
1 2 3 4 P