User's Guide

a.
b.
a.
b.
a.
b.
c.
d.
Check if there any physical damage to the
sensor
Check the location of the sensor
Move the sensor closer to the controller
Replace the battery of the sensor if the
controller does not respond when the sensor is
activated within short range
The technian will pair the sensor with the
controller
The technician will assign the acurate
information about the sensor assignment to
the web platform
2. Programming the sensor with the controller
When a sensor failure occurs, try the following:
3. Sensor failure
USER GUIDE
1. Insert battery into the AKWAtek sensors
Unscrew the sensor (small phillips)
Insert AAA battery as in the picture
This device complies with Health Canada’s Safety Code. The installer of this device should ensure that RF radiation is not emitted in excess of the Health Canada’s
requirement. Information can be obtained at: http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct/index-eng.php”
Health Canada RF Exposure Warning Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Three years warranty
This product is guaranteed to be free of defects in materials and workmanship for 3 years from the date of purchase. If this product is defective, call 1.833.995.6400
for repair or replacement. Guarantee does not include normal wear and tear or batteries.
If you have any questions, problems or missing parts, please call LEAKO customer support at 1.833.995.6400 or e-mail us at : [e-mail] www.leako.ca
IC Statements:
FCC statements:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.