Leadtek Bluetooth Module LRBT01 Rev 0.1 Leadtek Research Inc. 18F., No. 166, Jian-Yi Rd., Chung-Ho Dist., New Taipei City 23511 Taiwan, R.O.C. Tel : +886-2-8226-5800 Fax : +886-2-8226-5801 gps@leadtek.com.tw www.leadtek.com.
Contents Contents ........................................................................................................................... 1 Change History .................................................................................................................. 2 Table ................................................................................................................................ 3 Figure ............................................................................................
Change History Rev. Date 0.1 2020/07/01 Change Description Modified by Remark Draft This document and the use of any information contained herein is subject to the acceptance of Leadtek terms and conditions. They can be downloaded from www.leadtek.com . Leadtek makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice.
Table Table 2-1:Hardware Specification ............................................................................................................6 Table 2-2:Electrical Characteristics ..........................................................................................................7 Table 2-3:Pin Assignment .........................................................................................................................8 Table 2-4:Module’s Dimension .........................................
1 Introduction Leadtek new generation LRBT01H Bluetooth module products The main unit’s circuitry consists of a device chipset; the nRF52810 Microcontroller Unit and 2.4G RF, the nRF52810 chip has UART output interface transform .The system is powered by system supply with a nominal voltage of 3.3V volts. The nRF52810 Microcontroller is the main processor responsible for driving the RF 2.4GHz signal communicate and data link to UART interface transform. Figure 1-1: LR BT01 Image 1.1 Features 1.1.
1.1.
2 Technical Specification 2.1 Hardware Features • Based on the high performance features of Nordic™ low power single chipset • SMT pads allow for fully automatic assembly processes equipment and reflow soldering • RoHS compliant (lead-free and Halogen free) 2.1.1 Hardware Specification Specification BT01 Processor Nordic/ NRF52810 Product BLUETOOTH Module connector 32Pin Form Factor Size *DIMENSIONS 23x10.2x2.65mm WEIGHT 1,8g BT4.0 & BLE BT 4.0 & BT 5.0 RF(Frequency) 2.402~2.
2.1.2 Electrical Characteristics Operation Conditions Parameter Min. Typ. Max. Units 2.6 3.3v 3.6 V Peak supply current -- 15 -- mA Standby Backup current -- -- 60 uA I/O Input high level (VIH) 1.82 -- 2.52 V I/O Input low level (VIL) 0 -- 0.4 V I/O Output high level (VoH) 1.8 3.3 3.6 V I/O Output low level (VoL) 0 -- 0.4 V Input Operation supply voltage Table 2-2:Electrical Characteristics 2.1.3 Pin Location Figure 2-1: Pin Location 2.1.
7 Reserved N/A Keep floating 8 Digital I/O I/O General purpose I/O 9 Digital I/O I/O General purpose I/O 10 Digital I/O I/O General purpose I/O SAADC/COMP/LPCOMP input 11 Digital I/O I/O General purpose I/O SAADC/COMP/LPCOMP input 12 Reserved N/A Keep floating 13 Reserved N/A Keep floating 14 Reserved N/A Keep floating 15 Digital I/O N/A General purpose I/O SAADC/COMP/LPCOMP input 16 Reserved N/A Keep floating 17 Reserved N/A Keep floating 18 Reserved N/A Keep
2.2 Physical Specification • Physical dimensions of the LR BT01 Bluetooth module are as follow: Items Description Length 23 ± 0.3 mm Width 10.2 ± 0.3 mm Height 2.65 ± 0.3 mm Weight 1.8 g Table 2-4:Module’s Dimension 2.3 Environmental Specification Item Description Operating temperature range -30 deg. C to +75 deg. C Storage temperature range -35 deg. C to +75 deg. C Humidity Up to 95% non-condensing or a wet Bulb temperature of +35 deg.
2.4 ESD Specification • Air Discharge : 2 KV / 4KV / 8KV (direct) • Contact Discharge : 2KV / 4KV (direct/indirect) Contact Headquarters and Global Market Administration Leadtek Research Inc., 18F, No. 166, Jian-Yi Rd., Chung-Ho Dist., New Taipei City 23511, Taiwan, R.O.C. Phone : +886-2-8226-5800 E-mail : gps@leadtek.com Website : www.leadtek.com 3 Appendix TBA © 2016 Leadtek Research Inc. All rights reserved.
4 Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device.
This modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.
OEM Guidance 1. Applicable FCC rules This module is granted by Single Modular Approval. It complies to the requirements of FCC part 15.247. 2. The specific operational use conditions This module can be used in lot devices. The input voltage to the module is nominally 3.3V DC. The operational ambient temperature of the module is -35 °C 75°C. The PCB antenna has been fixed, any other external antenna is prohibited. 3. Limited module procedures N/A 4. Trace antenna design N/A 5.
modular transmitter is certified that they do not have any responsibility for final product compliance. c) lf the investigation indicates a compliance concern the host product manufacturer is obligated to mitigate the issue. Host products using a modular transmitter are subject to all the applicable individual technical rules as well as to the general conditions of operation in Sections 15.5, 15.15, and 15.29 to not cause interference.