Leadtek GPS 9559X® Series Wireless Bluetooth GPS Receiver User Manual
Preface About this manual Congratulations on purchasing the Leadtek GPS 9559X Wireless Bluetooth Receiver. This manual provides information about the product features, applications, and usage. Read this document carefully before using the product to avoid difficulties while using it. Copyright Copyright 2006 Leadtek Research Inc®. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Leadtek Research Inc.
Safety instructions Please read through the following safety instructions carefully to avoid damage to the product and to others while using the product. • Be aware of traffic safety regulations. To prevent accidents, refrain from using the product while driving. • Switch off the product during flights, especially during takeoff and landing, to avoid interference with flight communication systems. • Follow the procedures described in this manual when using the product.
• If you need to remove or change the battery, press the tab at the back and slide the battery in the direction of the arrow. When inserting the battery, make sure it is inserted correctly. See “Changing the battery” on page 7. • Do not leave the GPS 9559X in your car unattended. The vehicle may be exposed to direct sunlight which can damage the product. • When using the product for the first time, use it outdoors to determine your position with accuracy.
Table of Contents Introducing the Leadtek GPS 9559X Wireless Bluetooth Receiver Features ................................................................................................. Applications ..................................................................................................... Package contents .............................................................................. About the Leadtek GPS 9559X Wireless Bluetooth Receiver .................
Appendix Specifications ................................................................................................................................................................................................... 17 LED ................................................................................................... 21 Limited warranty .............................................................................. 22 Safety cautions ...................................................................
Introducing the Leadtek GPS 9559X Wireless Bluetooth Receiver Introducing the Leadtek GPS 9559X Wireless Bluetooth Receiver Thank you for purchasing the Leadtek GPS 9559X Wireless Bluetooth Receiver. The GPS 9559X is a slim, compact, and lightweight GPS (Global Positioning System) receiver with Bluetooth compatibility.
Introducing the Leadtek GPS 9559X Wireless Bluetooth Receiver Features • • • • • • • • • • • • • • Latest SiRFStarIII chipset 20 channels with All-In-View tracking and SiRFStar high sensitivity software RF Metal Shield for best performance in noisy environments Multi-path Mitigation hardware Light-weight design and easy to carry Cold / Warm / Hot start time: 42/38/8 seconds On/off slide switch Two LED indicators to display Bluetooth and GPS status Specially designed Li-polymer battery Removable Li-Ion bat
Introducing the Leadtek GPS 9559X Wireless Bluetooth Receiver Package contents Make sure that your package contains the following items. If any of the items is missing or appears to be damaged, contact your vendor. Leadtek GPS 9559X Wireless Bluetooth Receiver Car charger Battery User manual Neck strap Travel charger • The travel charger shown here is for reference only. The actual charger may vary depending on the region of purchase.
Introducing the Leadtek GPS 9559X Wireless Bluetooth Receiver About the Leadtek GPS 9559X Wireless Bluetooth Receiver The GPS 9559X is compact and sleek, making it one of the smallest GPS receivers. The following illustration and table provide more information about the product components.
Introducing the Leadtek GPS 9559X Wireless Bluetooth Receiver Component 1. Bluetooth indicator Description • • Off: GPS 9559X powered off. Flashing blue: GPS 9559X powered on and waiting for Bluetooth connection. Blue: GPS 9559X currently in use and connected to a Bluetooth-enabled device. • 2. GPS indicator • • • • Red: GPS 9559X battery recharging in progress. The LED is turned off after battery is completely charged. Flashing red: Battery has insufficient charge. Recharge battery.
Getting started Getting started Charging the battery You can charge the GPS 9559X using the travel charger or the car charger as illustrated: • Insert the USB connector into the GPS 9559X and plug the adapter into an available wall outlet to charge the battery. • Insert the USB connector into the GPS 9559X and plug the car charger into the car’s cigarette lighter jack to charge the battery.
Getting started Changing the battery If you need to remove or change the battery, follow these steps: 1. Slide the battery compartment at the back of the device in the direction shown. 2. Slide the battery in the direction shown to remove the battery completely. Note • • • • Make sure that you insert the battery correctly when replacing it. The battery consumes more power when you have the device on continuously.
Getting started Installing the software The software CD provided in your package contains the WinFast® Navigator application which is an application for determining your location using the GPS 9559X. It also contains this user manual. Install the Navigator application on your mobile device from the CD. The USB driver and SD driver included on the disc are not needed for the GPS 9559X. You can use them for other GPS products from Leadtek.
Using the Leadtek GPS 9559X Wireless Bluetooth Receiver Using the Leadtek GPS 9559X Wireless Bluetooth Receiver Now you are ready to get your position using the Leadtek GPS 9559X Wireless Bluetooth Receiver. Before you proceed, make sure that you have installed the CE Navigator application on your mobile device. Obtaining your position using the GPS 9559X is a two-step process. First, you need to connect to the Bluetooth device such as a PDA.
Using the Leadtek GPS 9559X Wireless Bluetooth Receiver 2. Tap the Bluetooth icon again and select the “Bluetooth Manager” item. 3. From the Bluetooth Manager toolbar, tap “New | Connect!” to connect to all Bluetooth devices in the surrounding area. 4. Tap “Explore a Bluetooth device” to view Bluetooth device services and create a shortcut to them. Click “Next” to continue.
Using the Leadtek GPS 9559X Wireless Bluetooth Receiver 5. Tap inside the device selection box to display a list of devices. Click “Next” to continue. 6. Tap the “Leadtek 9559X” icon to view the device services. 7. Select the “ZV-SPP” service and tap “Next” to create a shortcut to it.
Using the Leadtek GPS 9559X Wireless Bluetooth Receiver 8. Tap “Finish” to complete the procedure. 9. From the “My Shortcuts” tab, tap the “Leadtek 9559X: ZV-SPP” icon and select the “Connect” option to connect to it. 10. When a connection is successfully established, the shortcut icon turns green.
Using the Leadtek GPS 9559X Wireless Bluetooth Receiver Using WinFast Navigator The WinFast Navigator utility enables you to view your position in terms of latitude and longitude, velocity, and altitude. You can also view the positions of the positioning satellites. Make sure that the utility is installed on your PDA as described in “Installing the software” on page 8. Note This user manual provides instructions on how to use the Leadtek GPS 9559X Wireless Bluetooth Receiver.
Using the Leadtek GPS 9559X Wireless Bluetooth Receiver Refer to the following sections to learn how to configure the port setting and use the utility. Note Remember to disconnect the GPS 9559X after you have finished using it to release the COM port for other applications or users. Tap View on the PDA screen and then select Disconnect or Exit to disconnect. Configuring the settings To use the WinFast Navigator utility with the GPS 9559X, you have to set the port and the baud rate as follows: 1.
Using the Leadtek GPS 9559X Wireless Bluetooth Receiver Viewing the location (Navigation) When you set the correct port and the GPS 9559X is connected successfully, the Navigator screen displays your position. Your position, latitude, longitude, velocity, and altitude are displayed. The navigation window also displays the time (UCT or Coordinated Universal Time), number of satellites used, and the HDOP (Horizontal Dilution of Precision).
Using the Leadtek GPS 9559X Wireless Bluetooth Receiver Viewing NMEA output (Development) To view detailed NMEA (National Marine Electronics Association) output, tap “View” and select the “Development” item.
Appendi Appendix Specifications Chipset GSW3 SiRF GSW3 Protocol Baud rate Datum Protocol message General Frequency C/A code Channels Accuracy Position Velocity Time SiRFStarIII technology NMEA-0183 (default) / SiRF Binary 19200bps (default) WGS-84 (default) / User configurable Default: GGA (1sec), GSA(5sec), GSV(5sec), RMC(1sec), VTG(1sec) L1, 1575.42MHz 1.023 MHz chip rate 20 10 meters, 2D RMS 5 meters 2D RMS, WAAS corrected < 5 meters (50%), DGPS corrected 0.
Appendix Time to first fix (Open sky and stationary) Reacquisition 0.1 sec. average Hot start 8 sec. average typical TTFF Warm start 38 sec. average typical TTFF Cold start 42 sec. average typical TTFF Dynamic conditions Altitude Velocity Acceleration Power Main power input consumption Backup power Operation Time Time 1pps pulse Level Pulse duration Time reference Measurements Interface Power recharge 18 18000 meters (60000 feet) max. 515 m/s (1000 knots) max. 4g max.
Appendix Connector for MMCX external antenna GPS communications TTTL level serial port interface Bluetooth Frequency 2400MHz to 2483.5zMHz Modulation Method GFSK, 1Mbps, 0.5BT Gaussian Maximum Data Rate Asynchronous: 723.2kbps/57.6kbps Synchronous: 433.9kbps/433.9kbps Transmission Power 4dBm (Class2) (Maximum) Hoping 1600hops/sec, 1MHz channel space Receiving Signal -84 to -15dBm Range Receiver IF 1.5MHz center frequency Frequency Baseband Crystal 16MHz OSC Compliant Bluetooth specification v1.
Appendix Battery (Same as Nokia 3650 battery pack) Battery cell Battery cell Output voltage Dimension (LxWxH) Li-Ion (1000mA) 2.3V~4.2V ± 0.025V 2.09” x 1.34” x 0.25” Environmental characteristic Operating -10° C ~ +50° C temperature range Storage temperature -20° C ~ +65° C range Physical characteristics Length 68.1 mm (2.68 in) Width 44 mm (1.73 in) Height 26.5 mm (1.
Appendix LED LED 1 Color BT active Low power Blue Yes - Color GPS fix status Battery charging Green No - Flashing Blue No - Red Yes LED 2 Flashing Green Yes - Orange Yes 21
Appendix Limited warranty Leadtek warrants to the original purchaser of this product that it shall be free of defects resulting from workmanship or components for a period of one (1) year from the date of sale. Defects covered by this warranty shall be corrected either by repair or, at Leadtek's discretion by replacement. In the event of replacement, the replacement unit will be warranted for the remainder of the original one (1) year period or thirty (30) days, whichever is longer.
Appendix Safety cautions The GPS system is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. Although the GPS 15H & 15L products are precision electronic Navigation Aid (NAVAID), any NAVAID can be misused or misinterpreted, and therefore become unsafe. Use these products at your own risk. To reduce the risk, carefully review, and all aspects of these technical specifications before using the GPS 15H & 15L.
Appendix 1. From the Navigator menu, tap Tools | Port Setting... and set the Port and BaudRate as described in “Configuring the settings” on page 14. Tap OK. 2. Tap Tools | Command and select Cold Start. Click OK to reset the GPS 9559X.
Appendix A: This might be caused by unstable satellite signals or weak signals resulting from heavily blocked areas, which affect the positioning of the car on the map. Q: Why is there no sign of signal transmission in my map utility program and positioning fails even though my GPS is connected? This might be caused by incorrect COM port settings. Most PDA map utility programs search for GPS device automatically and the GPS device is not found.
Appendix Regulatory notices FCC Class B This device complies with Part 15 of the FCC rules for class B digital devices FOR HOME OR OFFICE USE. These limits are designed to provide reasonable protection against harmful interference in a residential installation, and are more stringent than "outdoor" requirements.
Appendix • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This product does not contain any user-serviceable parts. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under part 15 regulation.
Class A ITE Class A ITE is a category of all other ITE which satisfies the Class A ITE limits but not the Class B ITE limits. Such equipment should not be restricted in its sale but the following warning shall be included in the instructions for use: Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Appendix Class B ITE Class B ITE is a category of apparatus which satisfies the Class B ITE disturbance limits. Class B ITE is intended primarily for use in the domestic environment and may include: • equipment with no fixed place of use; for example, portable equipment powered by built-in batteries; • telecommunication terminal equipment powered by a telecommunication network; • personal computers and auxiliary connected equipment.
Customer service information International Headquarters 18th Fl., 166, Chien-Yi Rd. Chung Ho, Taipei Hsien Taiwan (235) Phone: +886 (0)2 8226 5800 Fax: +886 (0)2 8226 5801 http://www.leadtek.com.tw E-mail: gpssales@leadtek.com.tw United States Headquarters 46732 Lakeview Blvd. Fremont, CA 94538 U.S.A. Phone: +1 510 490 8076 Fax: +1 510 490 7759 http://www.gpsleadtek.com Europe Headquarters Phone: +31 (0)36 536 5578 Fax: +31 (0)36 536 2215 Antennestraat 16 1322 AB Almere The Netherlands http://www.leadtek.