User's Manual

B
1. Overview
4
4. Basic Operations
Power on: ress and hold the power
button for 3 seconds to turn it on.
Power off: Press and hold the power
button for 3 seconds to turn it off.
Standby: When the tracker is on,
press the power button (Only lights
are off; functions are still working).
Wake up: Press the power button in
standby mode.
Security: When the tracker is awake,
shake it to toggle on/off security, as
the picture below.
P
5. Install the Tracker
1. On the bicycle
Recommended location:
Installation steps:
1
2
3
2. On the scooter
Installation with the
included screws
Installation steps:
2. Charging
3. Install the SIM Card
1 cable
to the Micro USB charging port at
the bottom of the tracker.
. Connect one end of the USB
2
cable to the power adapter and
plug it into the wall socket, or
directly connect the cable to the
USB port on the computer.
. Connect the other end of the USB
Before installing the SIM
to
prevent the
locked. In case it’s locked for some
reason, please contact your carrier.
Card,
SIM Card from being
be sure
to unlock the SIM Card Pin Code
4 slot cover with the SIM
Card back in place.
. Put the
5
6
Power LED indicators:
Power on: Blue (steady)
Low power: Red (steady)
No power: Off
Charging: Red (flashes slowly)
Charging complete: Blue (steady)
Note: Please charge the battery for
at least one hour when you
use it for the first time to
maximize the battery life.
1
2
3
Security LED (Orange)
GSM LED (Blue)
GPS LED (Blue)
Power Button and LED (Red/Blue)
SIM Card Slot
Micro USB Charging Port
(fastened around the bars below the saddle)
1
2
3
4
5
6
Note: Install the tracker with the face
up to ensure better reception.
stick
6. Reset the Tracker
SIM Card
m
o
to
m
o
to
click
SIM C
3 SIM Card
with that on the slot cover and
insert the SIM Card into the slot
cover.
. Align the notch on the
1
Card Slot cover to open it.
. Pull the transparent film on the SIM
2
the film on
the cover.
. Remove
To reset the tracker, remove the
current SIM card in the tracker, insert
another SIM card with a different
phone number, and power on the
tracker. The data in the tracker will be
cleared and the tracker will be
restored to factory default settings.
Model: LR8M11
User’s Guide
L1(SMS mini Tracker)
Installation with the
included Velcro