AMOR 8A10
Copyright 2010 Leadtek Research Inc. All rights reserved. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Leadtek Research Inc. Leadtek makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. The information in this document is subject to change without notice.
Important Notes Important product and safety information 1. Although AMOR 8A10 has undergone several safety tests and conforms to a number of national security standards, using the device could become risky in certain abnormal climatic or seismic conditions without correct operation. Please read the manual carefully before operating the device. 2. For your safety, please keep AMOR 8A10 power off when aboard an aircraft. 3.
Battery safety notices Failing to use the battery correctly could be hazardous. Please pay attention to the following. 1. Your AMOR 8A10 is powered by a rechargeable battery that can be frequently charged and discharged. All batteries have a limited usage lifetime. When the device’s uptime and standby time becomes significantly shorter than normal, it is time to replace the battery. 2. Use only batteries approved and authorized by Leadtek.
9. Do not connect the battery to a vehicle cigarette lighter or any electrical plug. 10. If the battery is charged in an abnormal environment the battery protection device will fail. An adverse chemical reaction will result as well as a potentially hazardous surge in electrical current. 11. If the battery is not fully charged within the specified duration, stop charging immediately to avoid fire or damage to the battery. 12. Do not use the battery for any other purpose - it could shorten battery life.
Table of Contents 1 Quick Start 11 Introduction 12 What’s in the Package 13 Getting to Know Your AMOR 8A10 13 Front View 15 Rear View 16 Side View 17 Using the Cradle 20 Using the Remote Control 22 How to Make and Receive a Video Call 22 Dialing Out 23 Direct Dialing 26 Speed Dialing 28 Dialing from the Call Log 29 Dialing from the Contact 30 Operations During a Call 42 How to Make 3-way Conference Call 44 How to Use the Call Log
Table of Contents 47 53 71 How to Use the Contact 47 Creating a Contact 51 Editing a Contact 52 Deleting a Contact Settings Menu 54 General Settings 60 Network Settings 66 Call Settings 68 Photo Settings 70 Product Information Photo Displaying 72 Browsing Photos 76 Capturing Photos 77 Weather 79 News 81 Service 82 FCC Statement
1. Quick Start This chapter will help you to quickly start using the AMOR 8A10 to make a video call. Before you begin Using the AMOR 8A10 requires a Broadband Internet connection (e.g., a Cable modem or ADSL modem with a router). If you are sharing your Internet connection with another device (such as a PC), you will also need a broadband router or residential gateway. The AMOR 8A10 also supports wireless connection. You can connect the AMOR 8A10 to the Internet through a wireless AP / router.
Step 2. Connecting the power adapter Connect the Power Adapter to the Power jack (DC IN) on the back of the AMOR 8A10 and then plug the Power Adapter into an electrical outlet. AMOR 8A10 Power Adapter Step 3. Extending the stand Gently pull out the stand on the back of the AMOR 8A10 and extend it to a 45-degree angle so that the AMOR 8A10 can stand on its own.
Turning on the AMOR 8A10 The Power button is located at the upper right hand corner of the unit. Press and hold the power button for three seconds, and the AMOR 8A10 will be turned on. After 1 or 2 minutes, the AMOR 8A10 boots up, and you will see a screen like the picture shown below. This means that you have to calibrate the input. Please see page 59 for the detailed instructions on how to proceed.
Using the wizard Before making your first video call, you first have to choose and set up your network settings correctly. When you use AMOR 8A10 for the first time, a built-in wizard will automatically start to help you quickly set up your network connection and other settings, as the picture shown below. Please follow the step-by-step instructions. Step 1: Tap on the “Start” button. Step 2: Tap on the language to select it. Step 3: Tap on the bar to make time zone selection.
Step 4: Tap on the left and right directional buttons to select the time zone, and then tap on the city in the list to represent your residence. Tap on the “Done” button when done. Step 5: Tap on the “OK” button. Step 6: Choose whether you are using a wired or a wireless network connection by tapping on the corresponding button.
Step 7: The wizard is trying to connect to the Internet. Step 8: After a few seconds, a message tells you that the connection is successful. Step 9: AMOR 8A10 is ready for use. Tap on the “GO” button.
After successfully setting up your AMOR 8A10, you will see the home screen like this: Icons Current date and time There are several icons at the top of the screen. Their meanings are described below. Note: The TV Out icon at the lower left corner only appears when AMOR 8A10 is inserted into the cradle (see page 17).
Internet connection status AMOR 8A10 is not connected to the Internet AMOR 8A10 is using a wired Internet connection AMOR 8A10 is using a wireless Internet connection SIP service status AMOR 8A10 is not connected to the SIP service AMOR 8A10 is connected to the SIP service Missed call Displays the number of missed calls Call settings Do Not Disturb is ON Auto Answer is ON Call Forward is ON Mute Ring off Message Get message 8
Making a video call The easiest way to make a video call is with Direct Dial. Simply tap on the Dial icon on the home screen. You will see the following screen: Tap on the virtual keyboard on the screen to input the desired phone number or IP address, and then tap on or to dial out. If you choose , the recipient and you can see each other on the screen. If you choose , the video function is disabled. When the other party answers the call, the connection is established, and you can start the conversation.
2. Introduction The AMOR 8A10 is a portable touch-screen videophone supporting Video and Voice applications. It is an intuitive, easy-to-use and easyto-configure IP video communication solution. Its major functions include IP Telephony, IP Camera Viewer (SIP based) and Digital Photo Frame. The AMOR 8A10 is a next generation IP videophone based on the SIP protocol and the H.264 video codec.
3. What’s in the Package Please make sure all of these items are included in your AMOR 8A10 package. If any item is missing, please contact your local dealer.
4. Getting to Know Your AMOR 8A10 Front View Microphone Rotatable camera Event indicator Light flasher Power indicator Power button Speaker Speaker Touch screen Rotatable camera The camera may be rotated up to 135 degrees by swiveling it up or down. You can adjust the camera position depending on how you use the AMOR 8A10. Light flasher Incoming calls cause the top of the AMOR 8A10 to flash.
Microphone There is a built-in microphone next to the camera. All audio input is received by the built-in microphone. The volume of the microphone can be adjusted in the settings menu. Event indicator When some events occur, this indicator will light in the following pattern: ! Flashing Blue: See the table below. Event Flashing Frequency New Message 0.7 second on / 0.7 second off Missed call Unread / unheard message Sleep mode 0.
Rear View Internal battery Stand Power jack Ethernet port Internal battery The AMOR 8A10 has a built-in rechargeable battery, supporting up to two hours of video conversation, and up to 3.5 hours of power in the standby mode (see note). When the battery power gets low, the power indicator on the front panel will flash red, reminding you to connect the power adapter to recharge the battery. The battery indicator in the status bar will also indicate the amount of battery power left.
Side View External headphone/ speaker jack USB 2.0 connector External microphone jack SD memory card slot USB 2.0 connector You can plug a USB flash drive or other supported devices into this connector. External headphone / speaker jack You can connect external speakers or headphones for audio output. External microphone jack You can connect an external microphone to input audio.
5. Using the Cradle The cradle can be used for many purposes: ! To connect your AMOR 8A10 to your TV and use it like a classic videophone on your big screen. ! As a docking station on your desk or counter and to easily connect your AMOR 8A10 to a power and Internet source and to other devices quickly and conveniently. ! Mounted on the wall in a kitchen or another room where you may want to make calls, in the same way that hearing people have a phone on the kitchen wall.
Recessed mounting holes A/V ports Ethernet port Telephone jack Power cord jack RCA / A/V ports Audio/Video Output Jacks on the back of the cradle which are used to connect to a television or other external monitor. Ethernet port Insert an RJ-45 Ethernet cord into the jack to connect the unit directly to the Internet. Telephone jack You can connect the telephone cord from your telephone set to the Telephone jack on the back of the cradle.
AC power cord jack Insert the power cord into the power port on the back of the cradle to recharge the AMOR 8A10. The power cord can also be connected directly to the AMOR 8A10. Recessed mounting holes These holes may be used to mount the cradle on a wall in a location in your home or office where you frequently make or receive calls. Make sure the cradle is properly secured, when you place in above a flat screen television.
6. Using the Remote Control You may control AMOR 8A10 with the remote control from a distance just like you do when you use the touch screen. You can highlight any icon or button on the AMOR 8A10 screen by navigating with the directional buttons (up, down, left, and right) on the remote. Press the “OK” button to select it. Selecting a text field will make the on-screen keyboard appear.
The definition of buttons on the remote control 21
7. How to Make and Receive a Video Call Dialing Out There are four methods to dial a number: Direct Dial, Speed Dial, Dial from Call Log, and Dial from Contact. The only difference among the four methods is how the phone number is obtained. Dialing Method How the Phone Number is Obtained Direct Dial Enter directly using the touch screen. Speed Dial Phone numbers are stored in the Speed Dial menu. Dial from Call Log Retrieve phone number from the Call Log.
Direct Dialing To Direct Dial, tap on the Dial icon on the home screen. A virtual number pad will appear. Enter the desired phone number or IP address, and tap on or to make a call. If you want to enter a URL, tap on the “Keyboard” icon at the bottom of the screen. A virtual keyboard will appear. Type the URL address and tap on the “Done” button.
You can choose either Video call or Audio call by tapping on the respective button. Option Function Initiate the call with both video and voice. However, you may not see video images of the recipient if the recipient answers the call with voice only. Initiate the call with voice only. Recipient will not be able to see you. Create a new contact with the phone number 1. Tap on the “Add New” icon. 2. A sub-menu will appear. Tap on the “Create New Contact” button. 3.
Add the phone number to a contact 1. Tap on the “Add New” icon. 2. A sub-menu will appear. Tap on the “Add to Contact List” button. 3. The contacts are listed. Tap on a contact for the phone number. 4. Choose a type of phone number and tap on the “Done” button. 5. The phone number is added to the contact. Tap on the “Save” button to save the contact.
Speed Dialing To use Speed Dial, the contact must be in the Contact list and saved into a slot first. Up to nine contacts in the Contact list can be saved in the Speed Dial slots. Please follow the steps below. 1. Tap on the Speed Dial icon on the home screen. 2. You will see the speed dial slot list. Please tap on an empty slot to assign a contact. 3. The contacts will be listed. Tap on the contact you would like to add to Speed Dial. 4. The contact is added to the slot. Tap on the “Done” button.
5. Now you can tap on one of the Speed Dial numbers to make a call. 6. AMOR 8A10 is calling out.
Dialing from the Call Log 1. Tap on the Call Log icon on the home screen. 2. The contents of the Call Log are displayed. Tap on the “Call” icon next to the desired record to make the call. You can tap on the up or down directional buttons on the right of the screen to find a specific record. 3. AMOR 8A10 is calling out.
Dialing from the Contact 1. Tap on the Contact icon on the home screen. 2. The Contacts are displayed. Tap on the icon next to the desired contact to make an audio call, or tap on the icon to make a video call. 3. AMOR 8A10 is calling out.
Operations During a Call During a call, there are several icons at the bottom. Their functions will be explained below. Options – Call on Hold 0286532618 Tap on the “Options” icon, and a sub-menu will appear. 8 If you would like to hold the call, tap on the “Hold” button. The one you talked to will be held for waiting 0286532618 To resume the conversation, tap on the “Retrieve” icon.
Options – Call Transfer If you need to transfer the call to a new recipient, tap on the “Transfer” button. 8 You can choose to transfer to a contact or a phone number. If the contact has more than one phone numbers, you have to choose one of them. The call is being transferred. 0223706495 If you choose to transfer to a phone number, enter the phone number and tap on the “Done” button.
0223706495 If you need to enter a URL, you can tap on the “Keyboard” icon. A virtual keyboard will appear. Enter the information and tap on the “Done” button. Options – Make a new call During a call, if you wish to make another call, you can tap on the “Make a new call” button. 8 You have to choose a contact or enter the phone number of the new call.
Tap on the icon to make an audio call, or tap on the icon to make a video call. 0286532618 When the second call is in progress, the first call will be held for waiting. Options – Switch as voice call If you want to talk with only voice, you can tap on the “Switch as voice call” button. 8 The video is disabled. You will not be able to see each other.
To resume the video, tap on the “Switch as video call” button in the “Options” menu. 6532618 0286532618 The other party will be able to see you, while you won’t see him or her until the other party selects the same “Switch as video call” option in the “Options” menu. Options – Buzz If you want to catch the attention of the other party, you can tap on the “Buzz” button. 8 0286532618 A light bulb symbol will show up at the upper left corner, and the top of the video phone of the other party will flash.
Numeric Keypad 0286532618 You can tap on the “Keyboard” icon to invoke a virtual numeric keypad if you need to input numbers during the call such like extension numbers or password. Tap on the number buttons when necessary. 0286532618 When you don’t need the keypad, tap on the “Close” button to hide it. Volume Control During a call, you can tap on the “Volume” icon to adjust the volume. 0286532618 Tap on the “+” button to increase the volume, and the “-” button to decrease the volume.
Share a Photo During a call, you can share a photo with the other party. 0286532618 To use this function, tap on the “Photo Share” icon. You have to choose the photo source. The photo can be stored in the internal memory, the SD card, or the external USB device. Tap on the photo you would to share. You can tap on the up and down directional buttons to browse the photos in the device. Tap on the “Yes” button to confirm the selection. The photo will be shown to the other party shortly.
The photo is waiting to be received by the other party. 0286532618 To stop sharing the photo, tap on the “Close” button. Capture a Photo During a call, you can tap on the “Capture” icon to take a snapshot of the image of the other party and save it to the internal memory. 0286532618 Screen Adjustment 0286532618 You can see page 76 for related information. During a call, you can adjust the sizes of the images of both parties, and how they are displayed on the screen.
Full Screen: The image of the other party is enlarged to full screen, and your image is hidden. PIP Display: The image of the other party occupies the full screen, and your image appears as a sub-picture at the lower-right corner. Equal Display: The image of the other party is on the left half of the screen, while your image is on the right half. Both images are equal in size.
Video Privacy 0286532618 When you tap on the “Privacy” icon, the video privacy is turned on and AMOR 8A10 stops sending your video to the other party during the video call, and you will not be seen by the one you talk to. The other party will see a picture which replaces your video. 0227603518 Video Privacy on (The screen of the other party) An icon on the left will show up indicating Video Privacy mode. 0286532618 To turn off video privacy, tap on the “Restore” icon.
Audio Mute 0286532618 When you tap on the “Mute” icon, the audio mute is turned on and AMOR 8A10 stops sending your audio to the other party during the call. You will not be heard by the one you talk to. An icon on the left will show up indicating Audio Mute mode. 0286532618 To turn off audio mute, tap on the “Sound” icon. Audio transmission will resume immediately. Hang Up To end the call, tap on the “Hang up” icon.
PTZ function During a video call, you can tap on your local image to enable the PTZ function. 0286532618 0286532618 The positions of the images of both parties will be exchanged. Tap on the button to start adjusting your local image with the PTZ function.
8. How to Make 3-way Conference Call You can make a 3-way conference call with AMOR 8A10. Please follow the steps below to start a conference. 1. Tap on the Conference icon on the home screen. 2. Select the members in the Contact list, or you can tap on the “Keypad” button to enter the phone number. 3. Enter the phone number of the other party and tap on the icon for video call or for audio call. 4. When the other party answers the call, the video connection is established.
5. Select the members in the Contact list, or you can tap on the “Keypad” button to enter the phone number. 6. Enter the phone number of the third party and tap on the icon for video call or for audio call. 0225157839 7. When the third party answers the call, the second party will be held. Tap on the “Conference” icon at the lower left corner to resume the call, and a 3-way video conference is established.
9. How to Use the Call Log To enter Call Log, please tap on the Call Log icon on the Home Screen. The contents of the Call Log are displayed. You can tap on the icon next to a record to make the call. You can tap on the icon next to a record to delete it.
The Call Log contains three types of information: Missed Calls, Received Calls, and Dialed Calls. ! “Missed Calls”: stores information about incoming calls that have been missed (unanswered). ! “Received Calls”: stores information about incoming answered calls. ! “Dialed Calls”: stores information about dialed calls. The kind of information in all three logs is the same, and the three logs can be displayed together or separately. The default is to displayed all logs together.
Deleting all call logs 1. Tap on the “Options” icon. 2. A sub-menu will appear. Tap on the “Delete All” button. 3. You will be asked for confirmation. Tap on the “Yes” button.
10. How to Use the Contact The Contact menu is where you store your contact information. When you enter the Contact menu, you will see a contact list with names and their photos, or you can add new contacts if the phonebook is empty. Contacts can be created manually, or extracted from the Call List. Each contact can store 100 sets of numbers, and you can define the phone number type to be the default.
4. Type the name of the contact and tap on the “Done” button. 5. Tap on the “Add New Number” tab to input the phone number for the contact. 6. Enter the phone number and tap on the “Done” button. You can assign the phone number type to be Home, Mobile, Office, or VOIP. 7. You may choose a specific ring tone for the contact. Tap on the “Ring Tones” tab. 8. Choose the ring tone you prefer and tap on the “Done” button.
9. You can select a corresponding photo for the contact. Tap on the “Memory” button to choose a photo. 10. You can choose a photo from Captured (the internal memory), the SD card, or the USB device. 11. Tap on a photo to select it. 12. The part of the photo selected as the avatar is denoted by the square. You can drag the cross at the center to move the square around the photo. 13. Tap on the “Done” icon when you are satisfied with the photo.
14. Tap on the “Yes” button to set the photo as the avatar. 15. The system is setting the avatar. 16. Tap on the “Save” button to save the contact. 17. You can switch to “Edit View” by tapping on the icon. 18. In Edit View, you can edit or delete the contact.
Editing a Contact 1. In the Contact menu, tap on the “Edit View” icon. 2. Tap on the “Edit” button next to the contact you wish to edit. 3. Tap on the fields and change the contents. When you finish all changes, tap on the “Save” button to update the contact.
Deleting a Contact 1. In the Contact menu, tap on the “Edit View” icon. 2. Tap on the “Delete” button next to the contact you wish to delete. 3. You will be asked for confirmation. Tap on the “Yes” button.
11. Settings Menu Tap on the Settings icon on the Home screen to enter the settings menu. The Settings menu is where you set up the AMOR 8A10 for your network and to work with your service provider. It is also where you configure it according to your preferences. There are five tabs corresponding to five sub-menus. To enter a submenu, tap on the respective tab.
General Settings The General Settings menu contains the general settings for the videophone, including Language, Date / Time, Sound, Display, and Security. Language You can choose a language for the on-screen menu with this function. Tap on the Language tab, and the following screen will appear. Select a language you prefer and tap on the “Done” button.
Date / Time You can set the date and time for AMOR 8A10 with this function. Tap on the Date / Time tab, and the following screen will appear. Time Zone: You can select the time zone in which you are using AMOR 8A10. Tap on the “Time Zone” tab and the following screen appears. Tap on the left and right directional buttons to select the time zone, and then tap on the city in the list to represent your residence. Tap on the “Back” icon when done.
Date / Time: Use this function to set the date and time for AMOR 8A10. Tap on the “Setup” button, and the following screen will appear. Tap on the up and down directional buttons to enter the date and time. Tap on the “Done” button when done. Format: You can choose a time format by your preference with this function. Tap on the “Format” tab and the following screen will appear. Tap on the perferred time format and tap on the “Done” button.
Sound You can adjust the volume and select the ring tone for AMOR 8A10 with this function. Tap on the Sound tab, and the following screen will appear. Volume: Tap on the “+” button to increase the volume, and tap on the “-” button to decrease the volume. Audio Call Ringtone / Video Call Ringtone: Tap on the “Audio Call Ringtone” or “Video Call Ringtone” tab, and the following screen will appear. Tap on the ring tone you like and tap on the “Done” button.
Display You can configure several display options for AMOR 8A10 with this function. Tap on the Display tab, and the following screen will appear. Brightness: Tap on the “+” button to increase the brightness of the LCD screen, and tap on the “-” button to decrease the brightness. Alternatively, you can drag the slider to adjust the brightness. Light Flash: Incoming calls cause the top of the AMOR 8A10 to flash. You can tap on this tab to choose a flash pattern you prefer.
Touch Calibration: This function can be used to calibrate input via the touch screen. Tap on the “Start” button to start the calibration. The screen will turn blank, with a crosshair at the upper-left corner. Tap on the center of the crosshair. Four more crosshairs will appear in the following sequence: lower-left corner, lower-right corner, upper-right corner, and center. Tap on the center of each of the crosshairs.
Network Settings You can create multiple network configuration profiles and conveniently switch to the one that works with the current network environment. Select Network Profile In the “Select Network Profile” tab, if you choose an existing profile, you will be asked if you want to connect to the selected network. Tap on the “Yes” button if you wish to use it.
Add / Edit Network Profile To create a new network profile, tap on the “Add” icon. Choose “Wired” or “Wireless” according to your network environment. If you choose “Wireless”, please see page 65 for the setting. Type the name for the profile and tap on the “Done” button.
Tap on the “Connect Type” tab to choose the type of network connection. Choose the connect type and tap on the “Done” button. The details for each connect type are described below. DHCP The AMOR 8A10 will acquire the IP address / Subnet Mask / Gateway / DNS address via the DHCP mechanism from an upstream device, such as a cable modem or a router.
Static IP Enter IP address / Subnet Mask / Gateway / DNS address manually. Internet AMOR 8A10 Ethernet Device Tap on the “Static IP” tab and tap on the “Done” button. Tap on the “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS”, and “Secondary DNS” tabs to input the respective information. Tap on the “Done” button when you finish the setting.
PPPoE PPPoE Username and Password are assigned by your ISP. Internet AMOR 8A10 Ethernet Device Tap on the “PPPoE” tab and tap on the “Done” button. Tap on the “Username” and “Password” tabs to input the respective information. Tap on the “Done” button when you finish the setting.
Wi-Fi Setting Internet AMOR 8A10 Wireless AP or Router Type the name for the profile and tap on the “Done” button. AMOR 8A10 will search for available wireless signals nearby. The signal sources are listed. Tap on the one you would like to use. Tap on each tab to edit the settings. Tap on the “Done” button when you finish the settings.
Call Settings The Call Setting menu contains the call-related settings for the AMOR 8A10. You can tap on the up and down directional buttons to view and access the options. Do Not Disturb Tap on the buttons to toggle "ON" or "OFF". When it is on, Do Not Disturb is enabled. Call Waiting Tap on the buttons to toggle "ON" or "OFF". When it is on, you will see a message on the screen when another call comes in during a call. You may answer the second call and then switch between these two calls.
Call Forward Tap on the buttons to toggle "ON" or "OFF". If the option is ON, you have to choose “Forwarding Method” and input the “Forward Number”. Forwarding Method: ! Always: Forward call to the number you assign directly. ! When Busy: Forward call to the number you assign when videophone is busy. ! No Answer_5s ... 25s: Forward call to the number you assign if there is no answer after the specified time period. Video Bandwidth Tap on this tab to choose a proper video bandwidth.
Photo Settings The Photo Setting menu contains the settings for displaying photos in the photo browser. The settings here are effective for all the photos from internal memory, SD memory card and USB device connected to AMOR 8A10. Image Display Choose a image display mode with function. The options are Smart and Stretch. Image Info Choose whether to display the information of the photo at the lower right corner.
Slide Sequence Choose the pattern to display the photos in the slideshow. The options are Sequential and Random. Slide Interval Choose the interval of the slideshow. The options are 15 sec, 30 sec, 5 min, 15 min, and 60 min. Transition Effect Choose the transition effect between the photos in the slideshow. The options are No Effect, Sliding, and Dissolve.
Product Information The Product Information menu contains information on Network, SIP, CODEC, Firmware, and Hardware. Tap on the “Product Information” tab, and the following screen will appear. You can tap on the tabs on the left of the screen to see the detailed information in each category.
12. Photo Displaying Tap on the Photo icon on the Home screen to enter the Photo menu. This is where you browse and capture photos. The system memory can store up to 100 photos and the capacity of the external memory depends on the size of the SD memory card and the USB device. To browse photos, tap on the “Photo Albums” tab. Tap on the device you want to browse. The method for browsing the photos are essentially the same across the three devices.
Browsing Photos Photos in the device are listed as thumbnails. Tap on a thumbnail to view the photo full size. The details of the photo are displayed at the lower right corner. You can tap on the left and right directional buttons to browse other photos. There are several icons at the bottom of the browser. Their functions are explained in the following pages.
SlideShow Tap on the “SlideShow” icon to start displaying all the photos in the current device as a slideshow. Tap anywhere on the screen to stop the slideshow. Rotate When viewing a photo, you can tap on the “Rotate” icon and select “Rotate Right” (clockwise) or “Rotate Left” (counterclockwise).
Zoom Tap on the “Zoom” icon to zoom in and zoom out the photo you are viewing. Tap on the “+” button to zoom in the photo, and “-” to zoom out the photo. Tap on the “Back” button to return to the browser. Set as If you want to set the current photo as the wallpaper or the avatar, tap on the “Set as” icon.
Tap on the “Wallpaper” or “Avatar” button depending on your preference. Delete To delete the current photo, tap on the “Delete” icon. You will be asked for confirmation. Tap on the “Yes” button.
Capturing Photos To capture photos, tap on the “Camera” tab in the Photo menu to enter the snapshot window. Tap on the “Take Photo” icon to capture the video in the snapshot window and save the image as a photo. The snapshot is listed on the left. You can browse the captured photos in the “Photo Album” menu.
13. Weather When connected to the Internet, the AMOR 8A10 can provide you with the weather information of many cities in the world. To see the weather information, tap on the “Weather” icon on the Home screen. The weather of your city and 3 days forecast are displayed. To add new cities, tap on the “Options” icon. Tap on the “Add New” icon.
Type the name of the country. When you type the initial letters, the matching names are listed. Tap on the country and tap on the “Done” button to choose it. Type the name of the city. Likewise, when you type the initial letters, the matching names are listed. Tap on the city and tap on the “Done” button to choose it. Tap on the “Done” button to confirm the city. The city is added to the weather list.
14. News The AMOR 8A10 can also bring you the latest news from all over the globe. To enter the News channel, tap on the “News” icon on the Home screen. News are classified in various categories. Tap the one you are interested in. The contents of the News are displayed.
RSS Reader AMOR 8A10 can also function as an RSS reader, with which you can constantly receive updates from news sites or blogs without visiting their web pages. To subscribe to an RSS feed, tap on the “Options” icon. Tap on the “Add new” icon. Enter the RSS Feed URL and tap on the “Done” button. After a short while, the RSS feed is added to the News list. Tap on the new tab and you will be able to see the information from the RSS feed.
15. Service Please consult your service provider for this function.
16. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: + This device may not cause harmful interference. + This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules.
