User's Manual

USER MANUAL
Charging the adaptor:
1. Insert the charging cable into the Micro USB input port & the
LED indicator will turn on
2. After charging completed, the LED indicator will fully turn on.
3. this item with wireless charger function.put it on a wireless
charger it will charging
Charging the earbuds:
1. Put the earbuds on the charging adaptor and the LED indicator
will turn on red when it is charging.
2. After charging
completed, the LED indicator will turn on blue
NOTE: In case of low battery, the speaker volume will lower down
& you will hear a warning tone from the speaker indicating low
battery.
Pairing for music/phone call
1. Turn on the earbuds by long pressing button for about
3seconds. You will hear a voice from the speaker along with the
blue and red indicator flashing to indicate Power
on.
2. Turn on your device and activate t
he Bluetooth function.
3. Search for Bluetooth name MO9768” and click to pair, you will
hear a voice from earbuds. Press the button to pause and press
twice to choose for next song. You just need to press button to
answer the call.
4. Turn off the earbuds by pressing button for around 4 seconds
and you will hear a voice indicating Power off.
Note: about the
using environment.
1. Bluetooth connection and transmission may be affected by the
surrounding environment like tress, metal and some other
materials, for they can absorb or block the signal, so the
distance of data transmission may be influenced as well.
2. Fully charge the device while using for the first time,
(when the battery gets lowered, the sound will be not as good as
the sound in normal
case.)
3. Please do not expose the earbuds into the high temperature
environment.
Specifications:
Wireless charger Input: 5V 300mA
Adaptor:
Input: 5V 300mA
Output: 5V 300mA
Battery: 3.7V/240mA
Total: 400mA
Earbuds
INPUT: 5V 40mA
Battery: 30mAh
Made in China
52.0 mm 52.0 mm
74.0 mm
FCC Warning Statement
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following
measures:
- Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.