LeEco Wireless Arcade Joystick User Manual
What’s Inside: Home Key Back Key R3 Key Key Lock Start Key L3 Key Arcade Joystick Nano USB Receiver Hex Tool User Manual Turbo Mode Switch Joystick Mode Switch Status Indicators Joystick Charging and Lock Indicators Gaming Mode Switch Action Buttons 2.4G Nano USB Receiver Storage Compartment Hardware illustrations shown are for example only. Actual hardware may vary depending on product.
Product Features The other 2 LED icons on the right side of the key lock button indicate the power and key lock status. • Compatible with Android and PC360 system. • Choice of wireless or USB cable operation. • Standard Vewlix 8-button layout, suitable for all fighting games. • Turbo Mode available for all 8 action buttons. • Authentic Sanwa Denshi joystick and action buttons. • Key locking function to avoid play disruption.
Mode selection switch: With the press of a button, you can switch between Dinput mode and Xinput mode. The default mode is Dinput. The figure below shows the LED indicators for Dinput To enable Turbo: Press and hold one or more of the 8 action buttons and flip the Turbo switch from OFF to ON. For rapid fire, press and hold an action button. To turn off Turbo: Flip the Turbo switch from ON to OFF.
Power indication and charging: When the battery level of the device is low, the LED Power Indicator Light will blink slowly. Plug the USB cable into a device with a USB port to charge. During charging, the power indicator light will blink. When the battery is fully charged, the light will remain on. To replace action buttons: 1. Open the storage compartment on the back of the device and use the hex tool to remove the 7 screws from the bottom of the device. 2.
Wireless signal If the wireless signal gets disconnected: WARNING - Repetitive Motion Injuries and Eyestrain Prolonged playing video games may make your muscles , joints , skin or eyes hur t. To avoid these problems: 1. Check whether the USB Wireless Adapter has been removed. 2. Check whether the device is out of range. 3. Check if there are strong radiation sources nearby. Warning 1. Avoid excessive play. Monitor children for appropriate play. 2.