OPERATION INSTRUCTION Video Door Phone User Manual Statement * If there is any doubt or disputable regarding information in this manual, you can call our company for clarification. * There maybe some differences between the descriptions provided here and the actual devices, as our products are constantly developing and upgrading. We apologize if this manual does not contain all of the latest updates. Thanks.
LIMITATION OF LIABILITY ※ The doorbell/camera units should be fitted with an approved weather shield if the chosen position is in direct sunlight, or in contact with rain, snow or irrigation sprinkler systems. ※ This users' manual is supplied 'as is', with no warranties, be it expressed or implied, including, but not limited to, the implied warranties of merchantability, suitability for any exact purpose, or non-infringement of any third party's rights.
Tableof ofContents Contents Table LIMITATION OF LIABILITY..............................................................................1 DISCLAIMER OF WARRANTY.........................................................................1 SAFETY INSTRUCTIONS...............................................................................1 CARING FOR THE ENVIRONMENT BY RECYCLING........................................2 COPYRIGHT STATEMENT..............................................................................
1. Description Of The Indoor Monitor 1.3 Note On Wiring Connection 1.1 Fittings The electric lock/source/camera is not include in the package, you can purchase an electric lock which is suitable for your need. For indoor monitor Screw anchors (4pcs) Indoor monitor (1pcs) Bracket (1pcs) In the standard delivery the system supports locks with Normally Open (N.O.) door unlocking 4 Pin line (5pcs) method.
NOTE: VCC AUDIO GND VIDEO * Avoid installation of the device near strong radiation e.g. TV set and PC etc. * Maintenance should be complied with a qualified technician. * Avoid hard shake , beating and collision, otherwise the internal exact components maybe be damaged . * Select the most suitable position where the monitor is located at user's eye level. * Switch off power supply before installing. * Keep more than 30cm away from AC power supply to avoid external interference.
1.6 Alarm Instructions Descriptions Name Power LED, the power indicator of the indoor monitor. CAM1 and CAM2 of this production have each an alarm function. When the trigger terminal and GND is shorted, the alarm is activate, the indoor monitor will emit alarm sound, the alarm ring time 1 The door 1 state lights, to door 1 working when the LED is on. 2 The door 2 state lights, to door 2 working when the LED is on. is according to the menu option “Alarm->CAM1 ring time/CAM2 ring time.
1.8 Operation Introduction On Indoor Monitor Monitoring VISITOR CALL Option in the settings in the menu: DOOR1, CAM1, DOOR2, CAM2 operating mode (open or closed) Please be aware of Connection of 2 outdoor cameras is required.
2. Menu Operations On Indoor Monitor Call Transfer To Other Extension Attention before using: 1. This indoor monitor includes OSD menu on it’s own device, users could set up some parameters on the indoor monitor. 2.1 Mouse Control 2. User can connect the device through web browser on PC, please refer to section “3. Web Browser Operation”. 3. Also user can connect the indoor monitor through mobile phone/tablet with the “uCareHome” app, please refer to “uCareHome app for IP Indoor Monitor User Manual”. 4.
2.1 Set System Parameters Scroll the button “ ” upward or downward to move the cursor to the option “System”, then press “ ” to enter the “System” menu. System setup includes: “Language”, “Time”, “Information”, “Network” and “Password”. 2.1.3 System – Information On system menu, move the cursor to “Information” and press “ ” to enter the “Information” menu. The information includes software version and release date. Software version: 2.1.1.
the outdoor bell will be muted after calling. [Return]: Exit the current menu. 2.1.5 System – Password On system menu, move the cursor to “Password” and press “ ” to enter the “Password” menu. User can set up the administrator’s password. The password set for entering the indoor monitor by web browser or the uCareHome app, default is “888888". [Return]: Exit the current menu. Door1 07 Door2 Ring 01 Off Return 2.2.
2.3 Set the mode of the indoor monitor On main menu, Move the cursor to “mode” and press “ Door2 status: Door1 unlock time: Door2 unlock time: Video mode: Standard: Keyboard sound: Key backlight: Door panel backlight: ” to enter the “Mode” menu. On 03 sec 03 sec CVBS PAL On On On Return [Door2 status]: Enable or disable the preview of Door2. [Door1 unlock Time]: From 02 seconds to 10 seconds. [Door2 unlock time]: From 02 seconds to 10 seconds.
2.7 AP Mode 2.6 Device Connect--Through wired network or wireless network A. User can connect the indoor monitor through network cable, operation steps: 1. Connect a network conversion with 4 pin interface to JA1 on the indoor monitor, and connect the keystone jack of network to the end of the 4 pin interface. 2. Connect the outdoor camera(s) and cctv camera(s) to the 4 pin terminal on indoor monitor. 3. Power on the indoor monitor. 4.
Press “LAN Search”: 3. Web Browser Operation 3.1 Running Environment Install the software through the Internet browser of OS to conveniently operate the network from a remote location. This device supports C/S, B/S, and access in LAN and WAN. It also supports IP and domain name visiting.
3.3 System Login 1)Open the web browser, and enter IP address “http://XXX.XXX.XXX.XXX” which can be searched by the app “uCareHome” on LAN. Note: If the device is connected to the WAN, the IP address should be a public IP address. The system will automatically enter the GUI as follows. 2) Click “ ”,if users access the device on the PC for the first time, it will pop up a window as below, click “ok” and install player on the PC according to the following method.
Note: Different router has different settings for port forwarding; please kindly follow your router guide to do the port-forwarding. After the port-forwarding is done, you could view the indoor unit from WAN now. 4)After login, it will enter into “Home” interface of the live view as follows. IPDoor 2015-03-25 11:20:08 5. Function Settings 4. Port Forwarding If visit indoor unit via Internet Explorer browser from WAN, you must do port forwarding on the router.
: Adjust brightness of image. Values can be set from 0~100.By default, the value is set at 80. : Adjust contrast of image. Values can be set from 0~100.By default, the value is set at 80. : Adjust saturation of image. Values can be set from 0~100.By default, the value is set at 80. Powerfreq (Power Line Frequency): Options include 50HZ and 60HZ. If the monitoring site adopting lighting elimination, user should set a corresponding frequency. If the two frequencies are different, the image will flick.
A. LAN Settings [IP Type]: There are two options: “Fixed IP Address” and “dynamic IP Address”. After selecting an Internet connection setting - such as fixed IP address (static) or dynamic IP address (DHCP) – and allocating a port, users can access the indoor unit remotely via the Internet. 1)If fixed IP address has been selected, it is necessary to set up an IP address, a subnet mask and a gateway. [IP Address]: Enter the IP address in this field. [Subnet Mask]: Input numbers for the subnet mask.
Click “Parameters—Event—Motion Detect” to access the “Motion Detect” menu and the dialog window where Enable Switch, MD Area, Sensibility, E-Mail, Alarm Output and motion detection schedule settings can be set will be appear. Motion Detect Record 5.3.
If users select “Work Mode”, click “ ” to access the interface as follows. Users can set up three different time period on workday and weekend, the max number of time span is 24. If users select “All Day Time”, all the times will be enabled. Note: Please make sure the device system time is correct before you set the alarm time period. Notice: When the motion detection alarm function is enabled, the motion detection alarm can be triggered after the indoor monitor is in standby mode for 30s.
5.4.5 System-Storage Device 5.4.3 System-Initialize Click “System—Storage Device” to enter the interface of SD card information as follows. If the indoor monitor doesn’t detect an TF card or there is no TF card plugged in, the option “status” will show “no ready”. Click “System—Initialize” to access initialize setting menu. This interface includes settings for Reboot, Factory Default and Upgrade. 1) Reboot: Click “ ”, it will pop-up a message window “the device will be rebooted.
Click “pic” to enter into the snapshot file list. Click one on the list to playback the snapshot. Click “Parent Folder” to return to the parent directory. Appendix 1. Accessing the indoor monitor via Mozilla Firefox 1.First, install Firefox on Windows(This document will use Firefox 28.0 as an example). 2. After installing Firefox, please search for the “IE Tab” add-on for Firefox, which can be downloaded from Firefox browser. 3.
4. During installation, the following figure will appear, click “Add” to confirm to install “IE Tab” add-on. Appendix 3. How to ensure reliable remote viewing of the indoor monitor through IE browser on Win 7/Win 8 64bit OS 5. After complete installation, the icon “ ” will appear on the right top of the browser interface (Shown on the red frame as below), and it means that IE Tab has been added to Chrome browser. 6.
)&& 6WDWHPHQW 7KLV HTXLSPHQW KDV EHHQ WHVWHG DQG IRXQG WR FRPSO\ ZLWK WKH OLPLWV IRU D &ODVV % GLJLWDO GHYLFH SXUVXDQW WR 3DUW RI WKH )&& 5XOHV 7KHVH OLPLWV DUH GHVLJQHG WR SURYLGH UHDVRQDEOH SURWHFWLRQ DJDLQVW KDUPIXO LQWHUIHUHQFH LQ D UHVLGHQWLDO LQVWDOODWLRQ 7KLV HTXLSPHQW JHQHUDWHV XVHV DQG FDQ UDGLDWH UDGLR IUHTXHQF\ HQHUJ\ DQG LI QRW LQVWDOOHG DQG XVHG LQ DFFRUGDQFH ZLWK WKH LQVWUXFWLRQV PD\ FDXVH KDUPIXO LQWHUIHUHQFH WR UDGLR FRPPXQLFDWLRQV +RZHYHU WKHUH LV QR JXDUDQWHH WKDW LQWHUIHUHQF