IP Camera Quick Guide
1. Important Safeguards and Warnings • Avoid dropping or striking the IP camera. • Keep the IP Camera in a normal room environment, between -10oC ~ +40oC, away from any direct heat source like direct sun light. Please do not install the IP Camera in a damp, smoky, or dusty environment. Do not let solids or liquids fall into or infiltrate the IP camera. • Use within the power and surge protection rating. • Don’t disassemble or try to repair the IP Camera by yourself.
C．The bottom and side interface 4 1 2 58 3 6 1. Enter AP mode button 2. The bottom bracket installation position 3. Microphone 4. Reset button，Press the key equipment will restore the factory settings 5. Camera lens 6. SD card socket 7. Speaker 8. IR 7 3. Device Connect A．The wired mode 1). Connect the crystal head of network cable to RJ45 interface of IP camera. 2). Connect the power adapter to the electrical outlet of the IP camera and power on. 3).
B. Port forwarding If visit IP Camera through IE browser or CMS client from WAN, you must do port forwarding on the router. Take NETGEAR router for example. Operation Steps: ① After login the interface of the router, choose “Port Forwarding”; ② Choose “Add custom Service”; ③ Input IP camera port; ④ Input IP camera IP address, click “Apply”（the http port and IP address should be the same as figure 4 which set by your own).
6. System Login 1) Open the web page, enter default IP address “http://192.168.1.88”. If the http port of IPC has been changed (if it is not “80”), it will be necessary to add a “:” followed by a port number. For example, assuming that the current port number is “P”, enter “http://192.168.0.X:P”, to correct the problem. Note: If the device is connected to the WAN, the IP address should be a public IP address. The system will automatically enter the GUI as follows.
7. Mobile Phone Support This IP camera can transmit live feed to your mobile phone, and support P2P for mobile monitoring, so that you can have ‘on the go’ access to your surveillance system from virtually anywhere. To view, you must install a mobile operating system specific program into your mobile. The mobile programs are located on the included CD, or downloaded via “APP Store” for an iPhone mobile, or downloaded via “Google Play” for an android mobile.
and UID number of the ipcam device(the UID is attached to the machine) will be shown on the available networks list. Select it and connected successfully means the mobile will be connected to the ipcam unit directly (shown as follows). Step5. Return to the “WIFI setting” interface and go to the next step. On this interface, available wireless devices will be shown on the list.
B. Wired network Step 1. Please download a program “MobileEyeDoor+” via “Play Store” on a smart-phone/pad with android system or via “APP Store” on an iPhone/ iPad with IOS system. Step 2. Connect the ipcam device through a wired cable to a wireless router, connect user’s phone/pad to the same wireless router through WIFI. Step 3. Run the program “MobileEyeDoor+”.
Possible reason: Player (ActiveX) not installed. Solution: Player (ActiveX) must be installed when visiting IP camera for the first time via internet Explore. How to install: Visit IP camera, first users must click “ ” and it will download the file “IPCamera_OCX_Setup.zip” to the PC. Open the zip file to run the file “IPCamera_OCX_Setup.exe” and it will install IPC’s OCX on the PC. 3). Fail to visit IP camera via IE browser? Possible Reason 1: Network is disconnected.
