IP Camera Quick Guide
1. Important Safeguards and Warnings • Avoid dropping or striking the IP camera. • Keep the IP Camera in a normal room environment, between -10oC ~ +40oC, away from any direct heat source like direct sun light. Please do not install the IP Camera in a damp, smoky, or dusty environment. Do not let solids or liquids fall into or infiltrate the IP camera. • Use within the power and surge protection rating. • Don’t disassemble or try to repair the IP Camera by yourself.
C.front interface 1 2 3 1. Camera lens 2. Microphone 3. Photosensitive resistance 4. IR 4 3. Device Connect 1). Connect the power adapter to the electrical outlet of the IP camera and power on. 2). With the mobile phone will establish a connection between IPcam and wireless router。(Please refer to 7 “mobile phone support” ) 4. Network connection and port forwarding A.
z Port forwarding If visit IP Camera through IE browser or CMS client from WAN, you must do port forwarding on the router. Take NETGEAR router for example. Operation Steps: ① After login the interface of the router, choose “Port Forwarding”; ② Choose “Add custom Service”; ③ Input IP camera port; ④ Input IP camera IP address, click “Apply”(the http port and IP address should be the same as figure 4 which set by your own).
2) First users must click “ ” and it will download the file “IPCamera_OCX_Setup.zip” to the PC. Open the zip file to run the file “IPCamera_OCX_Setup.exe” and it will install IPC’s OCX on the PC. 3) After installing player on the PC, input the authorized user name and password, the default user name of the administrator is “Admin” and the default password of administrator is “888888”. Select language “English” or “Chinese”, choose network stream “Main Flow” or “Minor Flow”, and then click “ ”.
7. Soft AP function and wireless network The ipcam can be worked in AP mode. If user doesn’t want to connect a wired cable to the indoor device, and user need prepare a wireless router and a smart-phone or a pad with IOS or Android system. Step 1. First user must install a mobile operating system specific program into his mobile or pad. and the iPhone and android program should be downloaded via “APP Store” and “Play Store”.
8. FAQ 1). Forget password? Solution:There is a "Reset" button on the device interface, press it for 3 seconds or more to restore all default parameters except IP address (Factory settings), user name and password of administrator are "Admin" and “888888”. 2). NO video Image displayed in IE browser? Possible reason: Player (ActiveX) not installed. Solution: Player (ActiveX) must be installed when visiting IP camera for the first time via internet Explore.
network failure caused by pc virus, until PC can be connected with the command of ping. Possible reason 2: IP Address has been occupied by other devices. Solution: Stop the connection between IP camera and Network, hook up IP camera to PC separately, reset IP address according to the proper operations recommended. Possible reason 3: IP addresses are in different subnets. Solution: Check IP address, subnet masking address of the IPC and the settings of Gateway.