深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Face Recognition Device User Manual Rights Reserved Shenzhen Layson Optoelectronics Co., Ltd. (LAYSON) keeps all rights. RESERVED Without a written permission, no unit and individual can copy the contents of this document in part or whole, or transmit it in any form. NOTE This document may be updated irregularly for upgrade version or other reasons.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Table of Contents 1 Introduction ................................................................................... 5 1.1 Writing Purpose .................................................................... 5 2 Product Introduction ..................................................................... 5 2.1 Product Function Overview ................................................. 5 3 Face Identification ................................................
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd 8.1.2 User Backup ............................................................... 18 8.1.3 Backup Recover ......................................................... 18 8.1.4 Delete All Users ......................................................... 19 8.2 Attendance Configuration Data.......................................... 19 8.2.1 Attendance Configuration Backup ............................ 19 8.2.2 Attendance Configuration Recover ..................
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd 1 Introduction 1.1 Writing Purpose This manual is intended for all users of access control system(Pc), providing reference for beginners. There is the instruction: Choosing a specific theme through the content of catalogue. Quick find and search a term by using indexes. We will give you a brief since the chapter 1. Acronym and terminology will be listed.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd 3 Face Identification The system will automatically enter the locked screen mode after the device is turned on or there is no operation for a long time, the default interface is as follows: When the camera detects the movement of an object within the recognition range, it enters the facial recognition page. The facial recognition page is divided into attendance mode and face recognition, mask recognition and temperature measurement.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd face data. When there is no user's face data matching, the voice prompt: Authentication failed; Mask recognition: Determine whether to wear a mask, and when it is detected that the passer-by is not wearing a mask, the voice prompt: Please wear a mask; Temperature measurement: to detect whether the body temperature is normal, and when an abnormal temperature of the passer-by is detected, the abnormal temperature will be alarmed.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Display: name, job number, punch time, attendance event name; voice announcement : verification result; open gate/door. (3)Failed verification-blocked list Display: name, job number, punch time, attendance event name; voice announcement : verification failed; close gate/door.(if the gate/door opened, close automatically).
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Notice: After the high temperature alarm is turned on, if the body temperature exceeds the set high temperature threshold (you can set it in the system setting-body temperature setting), an abnormal body temperature alarm will be issued. 4 Application List Click button on the face recognition page to enter the application list page. If an administrator user already exists in the system, you need to verify the administrator identity before entering.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Administrator authentication failed Application List 5 User Management Click application list>user management to enter the user management page, you can view all existed users in the system. You can also filter the users through roles.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd 5.1 New User Add Click button, going into the user add page, proceeding the face import after filling in the user basic information to complete the user add function.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Notice: (1) User ID cannot be repeated. (2) ‘name’ ’ID number ’’permission’ ’password’ must be filled. (3) Name and ID number should no more than 20 characters, password should no more than 10 characters. (4) ID number is limited to letters and numbers, passwords is limited to Arabic numerals.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Notice: the deleted user can not be recovered , please operate carefully. 6 Attendance Configuration Click application list>attendance configuration to enter the page. Attendance events only available after opening, click button, enabled/forbidden attendance events. 6.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Click button to enter attendance events add page, you need to input the name of events , select the timing range,time cycle and recording methods. Attendance timing is the period when the event worked, the time should not have conflict with other attendance events, which is one specific time corresponding one specific attendance event.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd management>attendance configuration. Notice: the deleted records can not be recovered , please operate carefully. 7 Records Search 7.1 Attendance records Search The attendance record search page displays all attendance event records, the information like the attendance time, attendance events, employees information, temperature information etc can be checked.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd 7.2 Recognition Records Search All records search pages display all pass records, the information like transit time, the name and body temperate of passerby can be checked. You can also select user type, transit time to narrow the scope through searching the name/ID number. 8 Data Management Click application list>data management to enter the data management page.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Notice: You need to insert USB to enter every function page. 8.1 Users Data User data management includes import users, users backup, recover the backup and delete all users. 8.1.1 User Import Before importing users, you need to store the created import files to the USB root directory in advance according to the import instruction, click import, the process will be conducted.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd http://lango-tech.com/xbh/docs?index=4 8.1.2 User Backup You can manually select the types of users that need to be backed up. All are selected by default. After confirming, click the Backup button to back up. Notice: (1) During the backup process, please do not plug or unplug the U disk. (2) During the backup process, please do not leave this page or perform operations such as shutdown or power failure. 8.1.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Notice: (1)During the recovering process, please dont insert/extract USB. (2)During the recovering process, please dont leave the page or power off. (3)Restoring the backup will overwrite the current face database. 8.1.4 Delete All Users Click ‘delete all users’, this will clear local face database. Notice: The deleted records can not be recovered , please operate carefully. 8.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd Notice: (1)During the backup process, please do not insert/extract USB. (2)During the backup process, please do not leave the page or power off. 8.2.2 Attendance Configuration Recover When recovering the backup, please make sure that the backup files exist in the USB, after selecting files which need to be recovered, click recover. Notice: (1)During the backup process, please do not insert/extract USB.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd 8.3 Recognition Recording Data Identification record data management includes export records, backup records, restore records, delete records, clear all records,and save. 8.3.1 Data Export You can manually select data type that need to be exported, the default is ‘select all’, you can select attendance record and all records.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd (1)During the backup process, please do not insert/extract USB. (2)During the backup process, please do not leave the page or power off. 8.3.2 Records Delete Same as exporting records, you need to confirm the deleted record type, event type and record range when deleting records. Then click ‘delete’. Notice: the deleted records can not be recovered , please operate carefully. 8.3.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd 8.4 Clear All Data Click Clear all data to clear all data in the device. Notice: After the data is cleared, it cannot be recovered, please operate with caution. 9 System Settings 9.1 Recognition Mode The system presets face detection, mask detection and forehead temperature detection.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd the camera, no snapshot recognition is performed until they enter the recognition area and stop for verification and recognition. 9.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd 9.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co., Ltd 9.5 Check For Update If there is a new version updated, you can click the【check for update】button in the system settings to proceed the new version test. Please make sure that the internet connection is good and enough space before updating the new version. 9.
深圳市雷松光电有限公司 Shenzhen Layson Optoelectronics Co.