User Manual

ManualsBrandsLAYON International Electronic & Telecom ManualsAudio EquipmentBluetooth Headset

BS036RM

Bluetooth Srereo Headset

User Manual

Bluetooth headset should be used with the compatible devices

which support Bluetooth wireless technology. This allows you the

freedom to make two calls (or one call) at any time.

Please read this user manual carefully before using the headset,

and also read your device's user manual regarding the Bluetooth

function, and pay attention to those important safety and

maintenance information.

Please keep the headset away from children.

1.Specifications

Bluetooth Specification V3.0

Bluetooth Profiles Supported Headset, Handsfree,A2DP1.2,HFP1.5,HSP1.2

Transmission Power Class 2

Operation Range up t0 10 Meters

Frequency Range 2.402-2.480GHz

Battery Built-in Rechargeable

3.7V/70mAH Li-polymer Battery

Charging Voltage DC4.75-5.25V

Charging Time About 2 hours

Music Playing Time Up to 3.5 hours

Talk Time* Up to 4 hours

Standby Time * up t0 100 hours

Dimensions(mm) L36xW14.5xH6

Weight About 6.6g

Note:The time mentioned above may vary due to user's operation mode and

device settings.

2.Structure Sketch

1.Volume Key+(V+) 2.Speaker

3.Volume Key -(v-) 4.Multifunction

Botton(MFC) 5.Charging Socket 6.Microphone

7.Headset Connecting

Summary of content (5 pages)

PAGE 1
BS036RM Bluetooth Srereo Headset User Manual Bluetooth headset should be used with the compatible devices which support Bluetooth wireless technology. This allows you the freedom to make two calls (or one call) at any time. Please read this user manual carefully before using the headset, and also read your device's user manual regarding the Bluetooth function, and pay attention to those important safety and maintenance information. Please keep the headset away from children. 1.
PAGE 2
3.Basic Operations 3.1.Charging Your Headset *prior to using the headset for the first time, please fully charge the battery. *Approximately 2 hours are required to fully charge the headset. *The indicator light turns red while being charged, and will turn blue automatically after being fully charged. *When the headset is running out of battery, the indicator light will flash red (the headset will switch off automatically when the battery is drained).
PAGE 3
6.7.If the headset has paired with your phone but disconnected, it will connect the paired phone automatically when you turn on the headset again within operation range. 7.Answering a call When a call is coming, you can press MFB to answer the call. 8.Ending a call You can press MFB to end the call you are answering. 9. Rejecting a call Press and hold MFB for 2 seconds to reject the call. 10.
PAGE 4
16.1 . Don't dean the headset with strong-erosive solvents. 16.2. Do not allow the headset to touch with any sharp objects as this will cause scratching and damage. 16.3. Be sure to store the headset in dry place, free from extreme high-temperature, humidity and dust. 17. Additional Statements 17.1. The headset is compliant with the specified bluetooth version.lt does not guarantee compatibility of all functions on every bluetooth enabled device .
PAGE 5
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.