Lava DSerial-550 Installation Manual MADE IN SERIAL 2 CANADA SERIAL 1 LAVA DSERIAL-DB9 LAVA COMPUTERS P.N. MOKO L29.8 Rev.
Serial 2 Settings Serial 1 Settings 16C552 IRQ Settings Serial 2 COM Address Configuration Serial 1 Hardware Set-Up Serial Settings COM 1 (03F8h)* Default for Serial1 COM 2 (02F8h)** Default for Serial2 COM 3 (03E8h) COM 5 (02D8h) COM 4 (02E8h) COM 6 (02C8h) Serial IRQ Settings Serial 2 Serial 1 15 12 11 10 7 5 2 4 3
DSerial-550 Configuration 1. Determine the number of serial ports installed in your system. Each serial port will have an unique "COM" designation. Configure the ports of the DSerial-550 for two unused COM addresses. 2. Determine which IRQ's (interrupts) are free in your system. Configure each serial port on the DSerial-550 for an unused IRQ. Sharing IRQ's with other devices is not recommended.
Lava Technical Support 9:00 am to 5:30 pm Monday to Friday (Eastern Time) Tel: +416 674-5942 Fax: + 416 674-8262 E-mail: tech@lavalink.com Internet: www.lavalink.com Lava Computer MFG Inc. This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Lava Computer MFG Inc. 908 Niagara Falls Blvd.