Users Manual Part 3

ManualsBrandsLAUREL PRECISION MACHINES ManualsElectronicsNote Sorter

How to remove jam notes 55

Chapter 3 IF AN ERROR OCCURK12

Pocket Transportation Unit 1 (Continued)

In case a note is blocked:

1-1. Turn the knob either transporta-

tion path D1 to D4 where a note

jammed and release the lock.

1-2. Pull the knob and open the trans-

portation path.

1-3. Turn knob D to the direction to

arrow mark and remove note at

transportation path.

Knob D

1-4. Pull the knob and close the trans-

portation path. Tighten the knob to

the direction of arrow mark.

± Be sure the transportation path is

locked.

Summary of content (13 pages)

PAGE 1
K12 Chapter 3 IF AN ERROR OCCUR Pocket Transportation Unit 1 (Continued) In case a note is blocked: 1-1. Turn the knob either transportation path D1 to D4 where a note jammed and release the lock. 1-2. Pull the knob and open the transportation path. 1-3. Turn knob D to the direction to arrow mark and remove note at transportation path. Knob D 1-4. Pull the knob and close the transportation path. Tighten the knob to the direction of arrow mark. ± Be sure the transportation path is locked.
PAGE 2
Chapter 3 IF AN ERROR OCCUR K12 Pocket Transportation Unit 1 (Continued) 2. Turn the knob E to H and remove remained notes to the pocket. Knob E Knob F Knob G Knob H 3. Remove notes from the pocket. STEP-5 Close Transportation Path 4. 2 1 1. Hold up the Transportation Path 4 with holding Lever 4 and release the lock by pressing Lever 5. 2. Close the Transportation Path 4 gently. Lever 4 1 Lever 5 STEP-6 Close the Front Door.
PAGE 3
K12 Chapter 3 IF AN ERROR OCCUR Pocket Transportation Unit 1 (Continued) STEP-7 Close the Upper Door. Lever 6 1. Keep up the Upper Door to unlock by pressing the Lever 6. 1 2. Close the Upper Door gently. 1 ± The reset action gets started. 2 ± Stand-by Display is shown after completing the reset action normally. ± If the reset does not get started, press F5 key to activate the reset.
PAGE 4
Chapter 3 IF AN ERROR OCCUR K12 Pocket Transportation Unit 2, Pocket Transportation Unit 3 STEP-1 Open the Front Door by the handle. STEP-2 Open the Upper Door and be sure to lock the door kept open. STEP-3 Open Transportation Path 7 1. Unlock the Transportation Path 7 by 2 pressing Lever 7 in the direction to arrow mark. 2. Open the Transportation Path 7 till locking the position. 1 Lever 7 STEP-4 Remove notes remained transportation path. 1.
PAGE 5
K12 Chapter 3 IF AN ERROR OCCUR Pocket Transportation Unit 2, Pocket Transportation Unit 3 (Continued) In case a note is blocked: 1-1. Turn the knob at either transportation path D1 to D4 where the note jammed and release the lock. 1-2. Pull the knob and open the transportation path till locking it. 1-3. Turn knob D to the direction of arrow mark and remove the note at transportation path. 1-4. Pull the knob and close the transportation path. Tighten the knob to the direction of arrow mark.
PAGE 6
Chapter 3 IF AN ERROR OCCUR K12 Pocket Transportation Unit 2, Pocket Transportation Unit 3 (Continued) 2. Turn the knob E to H and discharge the note to the pocket. Knob E Knob F Knob E Knob G Knob F Knob H Knob G Knob H 3. Remove notes from the pocket. STEP-5 Close the Transportation Path 7 2 1 1. Hold up the Transportation Path 7 with holding Lever 7 and release the lock by pressing Lever 8. 2. Close the Transportation Path 7 gently. Lever 7 1 Lever 8 STEP-6 Close the Front Door.
PAGE 7
K12 Chapter 3 IF AN ERROR OCCUR Pocket Transportation Unit 2, Pocket Transportation Unit 3 (Continued) STEP-7 Close the Upper Door. Lever 6 1. Keep up the Upper Door to unlock by pressing the Lever 6. 1 2. Close the Upper Door gently. 1 ± The reset action gets started. 2 ± Stand-by Display is shown after completing the reset action normally. ± If the reset does not get started, press F5 key to activate the reset.
PAGE 8
62
PAGE 9
Chapter 4 INSTALLATION, SPECIFICATIONS AND OTHERS Chapter 4 INSTALLATION, SPECIFICATIONS AND OTHERS 63
PAGE 10
Chapter 4 INSTALLATION, SPECIFICATIONS AND OTHERS K12 Installation Condition of installation x Install the unit under following environmental conditions. x Temperature: 5 to 35 °C x Humidity: 35 to 80 % x 40 cm or more higher flat place with sufficient withstand load. x The unit was not designed as waterproof. It should be installed indoor. x The unit should be installed away form a sink or other water place. x Keep away from direct sunlight and spot light. x Do not place in a dusty area.
PAGE 11
K12 Chapter 4 INSTALLATION, SPECIFICATIONS AND OTHERS Specifications Items Specifications Acceptable bank note size Shorter edge: 61 to 82mm. Longer edge: 117 to 177mm. Hopper Capacity Approx. 500 pcs. Height of bank notes is 150mm or less. Counting Speed 14 notes per second with the smallest size of Yuan,Euro,Dollar,RUBLE currency. Count speed changes depending on the note size.
PAGE 12
Chapter 4 INSTALLATION, SPECIFICATIONS AND OTHERS Accessories ♦♦ Cotton Swab 1 pc. ♦♦ Brush for cleaning (2 type) 1 pc. each. ♦♦ User manual 1 pc. ♦♦ Power Cable 1 pc. ♦♦ Modular Cable (With Ferrite Core)1 pc.