Installation & Assembly

ASSEMBLY INSTRUCTION

NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE

KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED

DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED

PAGE 1 OF 4

PART LIST

HARDWARE LIST

NO DESCRIPTION QTY

6 PCS

8 PCS

DESCRIPTION

TABLE TOP

TABLE LEG (R/L)

CENTER BAR

BOTTOM BAR

QTY

6 PCS

1 PC

JCBC BOLT M6 x 50MM

SPRING WASHER M6

HALF-MOON WASHER M6

ALLEN KEY M4 x 110MM

2 PCSJCBC BOLT M6 x 70MM

2 PCS

Handle

PAGE 1
ASSEMBLY INSTRUCTION NOTE: THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED HARDWARE LIST NO DESCRIPTION QTY 1 JCBC BOLT M6 x 50MM 6 PCS 2 JCBC BOLT M6 x 70MM 2 PCS 3 SPRING WASHER M6 8 PCS 4 HALF-MOON WASHER M6 6 PCS 5 ALLEN KEY M4 x 110MM 1 PC 6 Handle 2 PCS PART LIST NO DESCRIPTION QTY TABLE TOP 1 A TABLE LEG (R/L) 2 B CENTER BAR 1 C BOTTOM BAR 1 D PAGE 1 OF 4
PAGE 2
ASSEMBLY INSTRUCTION Step 1 Uninstall the drawer from Table Top (A) as shown. A Step 2 Install Table Leg (B) - Left Side to the Table Top (A) as shown below. B - LEFT SIDE LEFT SIDE - B 3 1 5 A A - Front side use Item (1). B - LEFT SIDE 5 2 3 4 A - Back side use Item (2).
PAGE 3
ASSEMBLY INSTRUCTION Step 3 Install Center Bar (C) and Bottom Bar (D) as shown below. Tighten all hardware in this step. LEFT SIDE - B D C A 4 3 C&D Step 4 Install another Table Leg (B) - Right Side together with Table Top (A). Tighten all hardware in this step. 2 5 B - RIGHT SIDE 3 1 5 A - Front side use Item (1). RIGHT SIDE - B 5 2 3 4 A - Back side use Item (2).
PAGE 4
ASSEMBLY INSTRUCTION Step 5 Tighten all hardware in this step. B - RIGHT SIDE 5 2 3 4 Step 6 Install drawer and handle as shown below.