Assembly Instructions

ASSEMBLY INSTRUCTIONS

B → A → C → D → E → F → G

1. Carefully unpack and identify all parts referring to the illustration for parts identification.

2. Turn power to the installation point OFF.

3. Locate the arm assembly (B), aligning the holes of the arm assembly (B) with the fixture body (A),

then secure with the screws (C) as shown in the diagram.

4. Pass the center hole of flat washer (E) over the protruding nipple (D) and secure with finial (F).

Hand tighten until snug.

5. Install proper bulbs (not provided) to each socket referring to the markings and / or labels on the

fixture for maximum wattage.

6. Unthread the screws (C) from caps of the fixture body (A), then insert the top neck of the glass (G)

into the caps and secure them with the screws (C). Do not over tighten the screws.

7. Restore power to the installation point ON. Retain this sheet for future reference.

PAGE 1
ASSEMBLY INSTRUCTIONS G A C C C B D E F B → A → C → D → E → F → G 1. Carefully unpack and identify all parts referring to the illustration for parts identification. 2. Turn power to the installation point OFF. 3. Locate the arm assembly (B), aligning the holes of the arm assembly (B) with the fixture body (A), then secure with the screws (C) as shown in the diagram. 4. Pass the center hole of flat washer (E) over the protruding nipple (D) and secure with finial (F). Hand tighten until snug. 5.