Installation & Assembly

ManualsBrandsLaurel Foundry Modern Farmhouse Manuals6 Seat Kitchen & Dining TablesManitou 64'' Trestle Dining Table

Assembly Instructions

ASSEMBLY RA TING

Tools Required For Assembly:







 





O O O





Allen Wrench

(Included) �



2 PERSONS RECOMMENDED

Page 1 of 5

Summary of content (5 pages)

PAGE 1
Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
PAGE 2
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST,CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES 1 When lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger flat washer and the head of the screw or bolt. Position each part correctly and insert screws or bolts into their respective holes by hand tighten or using the proper hand tool.
PAGE 3
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed. <::> r ., ... r r "" .. #1 X 1pc Table Top ., � X #2 x 2pcs Table leg #3 X 1pc Cross Bar � .... ., r ... @»»»»»»»»»»»») #A x 12pcs Bolt 01/4" x 3-1/2" CiJ #Bx 4pcs Hex Nut ©) #C x 12pcs Lock Washer 01/4" "" r ..... ., [B Hardware List r ' ... Parts List r #4 x 2pcs Fini al � ... @ #D x 12pcs Flat Washer 01/4" ., "I � ., ... .
PAGE 4
#Ax4pcs #Bx4pcs #C x4pcs #D x4pcs Prepare 4 bolts assembly by inserting lock washer (#C), then flat washer (#D) onto bolts (#A). Insert the hex nuts (#B) into crossbar. Align legs (#2) to the holes of the crossbar, then secure with bolts (#A) by having bolts (#A) connect to hex nut (#C). Prepare 8 bolts assembly by inserting lock washer (#C), then flat washer (#D) onto bolts (#A). Align legs (#2) to the holes of the bench top (#1). Secure with bolts (#A).
PAGE 5
Insert finial (#4) to the holes located in the center of the legs (#2).