0'x12' Dome Soft Top Gazebo with Netting
WARNING: Fabric meets CPAI-84 specification for flame resistance. It is Not Fire Proof. The fabric will burn if left in continuous contact with any flame source. The application of any harsh chemicals to the fabric may render the flame-resistant properties ineffective. Always read and follow the instructions before use. When assembling and using this product, basic safety precautions must always be followed to reduce risk of personal injury and damage to the product or surroundings.
PARTS LIST Description Sketch QTY A Post 4 pcs B1 Long Cross Beam 2 pcs B2 Long Cross Beam 2 pcs C1 Short Cross Beam 2 pcs C2 Short Cross Beam 2 pcs D Top Connector E U Shape Bracket F Top Connector G Post Base 4 pcs H1 Roof Tube 4 pcs H2 Roof Tube 4 pcs H3 Roof Tube 2 pcs H4 Roof Tube 2 pcs 1 pc 4 pcs 1 pc J Small Roof Cover 1 pc K Big Roof Cover 1 pc M Mosquito Netting 4 pcs N Finial 1 pc AA Bolt BB Bolt CC Bolt DD Bolt EE Anchor 8 pcs FF Wre
Fig.3 STEP 1 B1 C2 Fig.2 B2 Fig.2 Fig.3 C1 A C1 B2 Fig.2 Fig.2 C2 B1 A A Fig.1 A Fig.3 Fig.1 A DD Fig.2 CC E B1/C1 B2/C2 A AA G Fig.1: Using bolt (DD) to connect Post1(A) and Leg Base1(G). Repeat these steps for all Post (A). Fig.2: Insert Long Cross Beam (B1) to Long Cross Beam (B2), and fix it with Bolt (CC). Insert ShortCross Beam (C1) to Short Cross Beam (C2), and fix it with Bolt (CC). Repeat the above steps for B1 &B2, C1&C2. Fig.
STEP 2 Fig.4 & Fig.5 H3 H1 Fig.6 H2 H1 H3 H1 H4 H2 Fig.6 H2 Fig.4 Fig.5 H3 F H1 H4 D H1 D Fig.6 H2 H1 H4 H3 Fig.4: Insert Top Connector (F) to Top Connector (D), insert Roof Tube (H1) to Top Connector (D) long tube.Repeat the above steps for all H1. Fig.5: Insert Roof Tube (H3) to Top Connector (D), Insert Roof Tube (H4) to Top Connector (D). Repeat the above steps for all Roof Tube(H3& H4).Pay attention to the angle for Roof Tube (H3 & H1)is small ,angle for Roof Tube(H4 & H1) is big.
STEP 3 H4 Fig.7 H3 H4 B2 C2 Fig.9 Fig.7 Fig.7 Fig.8 BB H3 AA E H2 H2 H3 Fig.8 H2 Fig.9 AA H4 B2 C2 Fig.7: Insert Roof Tube (H2) to U Shape Bracket (E), and fix it with Bolt (BB). Repeat the above steps for all H2. Fig.8: Using bolt (AA) to connect Roof Tube (H3) and Short Cross Beam (C2), Repeat the above steps for C2. Fig.9: Using bolt (AA) to connect Roof Tube (H4) and Long Cross Beam( B2), Repeat the above steps for B2.
STEP 4 Fig.10 J Fig.11 K Fig.11 J N Fig.10 K H2 Fig.10: Attach Small Roof Cover (J), insert Finial (N). Fig.11: Attach Big Roof Cover (K), insert Roof Tube (H2) to corner of the Big Roof Cover (K). Repeat the above steps for each corner.
STEP 5 Fig.12 M Fig.13 Fig. 12 Velcro Fig.13 G M EE Fig.12: Attach the Mosquito Netting (M) Velcro to Cross beam (B1/B2/C1/C2). Fig.13: Insert 2pcs Anchor (EE) to each Post Base (G). Any questions on assembly or parts, please contact: customerservice@e2e-corp.