Instructions / Assembly

Assembly Instructions

Please read these instructions carefully before starting assembly. We suggest you carry out the assembly

on a soft surface like a carpet, so as to avoid scratching the paint. Please note because of the nature of

cast metal, you may find roughness on the surface which enhances the beauty of the product and is not

a defect.

*Do not discard any of packaging until you have checked that you have all parts and pack of fittings.

*Keep children away during assembly.This item contains small parts which can be swallowed by children.

*Retain the assembly instructions for future reference.

*Maximum load on the edge of the table is 5kg

PARTS LIST

Part

No.

Description Part picture Qty

Part

No.

Description Parts Picture Qty.

① Table Top 1 A M8 Nut 8

② Table Leg 4 B

M8 Spring

washer

③ Leg Support 1 C M8 Flat washer

④ Wrench 1 D

M8 protect

hats

⑤

Screwdriver 1 E Stud M8 4

⑥

L Rubber Leg Pad 4 Note:Rubber Leg Pad L have been presaaembled

PAGE 1
Assembly Instructions Please read these instructions carefully before starting assembly. We suggest you carry out the assembly on a soft surface like a carpet, so as to avoid scratching the paint. Please note because of the nature of cast metal, you may find roughness on the surface which enhances the beauty of the product and is not a defect. *Do not discard any of packaging until you have checked that you have all parts and pack of fittings. *Keep children away during assembly.
PAGE 2
INSTRUCTIONS Step 1 Step 2 A B C Turn over the table top.Attach the Stud M8(E) into the Nuts(inside table),Then,Attach table Legs(②) to the Studs on Place all parts on a clean and soft surface the Table Top (①) using Wahers and Nuts (A,B,C).DO NOT over tighten Step 3 A B C Attach the Table legs Support (③)to the four Legs (②)using flat washer,spring washer and nuts(A,B,C) DO NOT over tighten. Step 4 D Tighten all Nuts with Wrench.And Turn over the table.