golo3 User Manual
LAUNCH golo3 User Manual All rights reserved! No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means of electronic, mechanical, photocopying and recording or otherwise, without the prior written permission of LAUNCH. This manual is designed only for the use of this unit. LAUNCH is not responsible for any use of this manual on the other units. The manual and all the samples herein can be changed without prior notice.
LAUNCH golo3 User Manual Precautions: z z z z z z The socket-outlet shall be installed near the equipment and shall be easily accessible. The golo3 is a precision electronic instrument. Observe caution when handing the module. Dropping the module can cause damage.
LAUNCH golo3 User Manual CONTENT 1. Overview...........................................................................................................................................1 1.1 knowledge ...................................................................................................................................1 1.2 Features .......................................................................................................................................1 1.3 Parameters .............
LAUNCH golo3 User Manual 1. Overview 1.1 knowledge Based on the full vehicle system data collection, Launch-developed golo product is a telematics product integrated GPS/GPRS/3G/G-Sensor and other modules in the industry.
LAUNCH golo3 User Manual 1.5 Structure 序号 功能 1 Power indicator: When turn on, it will flash alternately three times between the red light and the green, then the green light flashes regularly 2 Communication indicator: It will flash when the golo3 module is communicating with your smart device or the golo3 module is resetting. 3 WIFI switch 4 SIM card location 5 16 pin OBD II connector: To connect to vehicle’s OBD II diagnostic socket. 2. Connection and installation 2.
LAUNCH golo3 User Manual Download in Google play 1) Turn on your Android device. Be sure you have a strong signal that links to the network. 2) Go into Google play (https://play.google.com/store) and search for “golo”, then install the golo3 App (follow the on-screen instructions). 2.2 golo3 Connection NOTE: 1. Remove the golo3 module once testing and/or diagnosis is complete; 2. Please turn off the ignition switch before connecting or disconnecting the golo3. Step 1: Locate the vehicle’s DLC socket.
LAUNCH golo3 User Manual § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user.