User's Manual

ManualsBrandsLaunch Tech ManualsElectronicsHeavy duty / Medium duty / Light duty Vehicle Communication Interface

Table Of Contents

X-431 HD Module Quick Start Guide

LAUNCH

了解诊断盒

Knowledge of X-431 HD Module

Diagnostic socket

(For connecting the diagnostic cable.)

DC-IN power jack

USB port

Displays the working status of the module. t is defined as

follows:

1. Vehicle: While the module is communicating with the

vehicle, the indicator lights up and flashes. Otherwise,

it will not illuminate.

2. Power: It illuminates solid red when the module is

powered on.

3. Bluetooth: Blue indicates the module is working in

Bluetooth mode.

4. USB: It lights up when the module is connected to the

diagnostic tool via USB cable.

LED Indicators

X-431 HD module works as a vehicle communication interface device, which is used read the

vehicle data and then send it to the diagnostic tool via Bluetooth communication and USB

connection. The LED indicators enable you to easily identify the working status of the module.

Technical parameters:

 Working voltage: 9-36V

 Power consumption:≤ 2W

 Working temp.:- 10℃- 55℃

 Communication via:

1) USB cable

2) Bluetooth

Note: When the diagnostic

cable or adaptor cable keeps

unused, please remember to

unplug it from the vehicle’s

DLC.

X-431 HD module

(For collecting vehicle live data)

Bluetooth

To vehicle’s DLC

Diagnostic cable

Working Principle

USB cable

Accessory Checklist

HD module Diagnostic cable USB cables

Cigarette lighter Battery clamps cable Adaptor cable kit

(For accessing vehicle

live data)

(To connect the

module and diagnostic

tool to perform vehicle

diagnosis.)

(To connect the

module to the diagnostic

tool with different type of

USB port.)

(A piece of paper bearing

S/N and Activation Code,

which is needed for your

registration.)

Power adaptor Password envelope

(Sends the vehicle data

to diagnostic tool)

(For connecting the power adaptor

or cigarette lighter/battery clamps

cable to obtain power.

(For connecting it to the diagnostic

tool to perform vehicle diagnosis.)

(For different vehicle

diagnostic socket, it may

be necessary to use one of

the adaptor cables included

within the kit.)

(To supply power to the HD

module through connection

to vehicle’s battery.)

(To supply power to the HD

module through connection

to cigarette lighter

receptacle.)

(To supply power to the HD

module through AC outlet.)

Launch’s Android-based diagnostic tool

(such as X-431 PAD II etc)

(For analyzing received vehicle data and

indicating the test results.)

Summary of content (3 pages)

PAGE 1
X-431 HD Module Quick Start Guide Knowledge 了解诊断盒 of X-431 HD Module Accessory Checklist X-431 HD module works as a vehicle communication interface device, which is used read the vehicle data and then send it to the diagnostic tool via Bluetooth communication and USB connection. The LED indicators enable you to easily identify the working status of the module. Technical parameters: Diagnostic socket Working voltage: 9-36V (For connecting the diagnostic cable.
PAGE 2
X-431 HD Module 1 Quick Start Guide LAUNCH 2 Connections If you had a diagnostic tool of 12V car configuration and intend to experience the diagnosis of trucks, follow the steps described below to activate the module: Note: Please make sure that the diagnostic tool is properly connected to the Internet before proceeding this step. 1. Launch the application, then tap -> “Profile”/ “My Data” -> “Activate Connector”. 1.
PAGE 3
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.