Launch Tech Co., Ltd. Automotive Diagnosis Terminal (DBSCar II) User Manual (V1.
Launch Tech Co., Ltd. 1. Automotive Diagnosis Terminal (DBSCar II ) (Only applies for 12V cars) Fig. 1-1 Diagnostic connector ① OBD-16 diagnostic connector To connect on vehicle’s OBD2 DLC. ② ECU communication indicator It flashes when the connector is communicating with the vehicle. ③ Power indicator It lights up while the connector is plugged into the vehicle’s DLC.
Launch Tech Co., Ltd. 2. Technical Parameters Working voltage: DC 9 -18V Average working current: About 35mA Standby current: About 25mA Working temperature: -10 to 50℃ Storage temperature: -30 to 70℃ Storage humidity: <80% Working humidity: <60% 3. Connections 3.1 Preparation Turn on the vehicle power supply. Throttle should be closed at its close position. 3.
Launch Tech Co., Ltd. through a standardized DLC. A vehicle not equipped with an OBD II management system supplies communication through a DLC connection, and in some cases supplies 12V power through the cigarette lighter receptacle or a connection to the vehicle battery. Follow the steps mentioned below to connect OBD II vehicle: 1. Locate vehicle’s DLC socket. 2.
Launch Tech Co., Ltd. Fig. 3-4 Automotive Diagnosis Terminal (Model DS201) is in compliance with the essential Requirements and other relevant provisions of Directive 1999/5/EC. Environment friendly disposal You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal centre. FCC Caution: This device complies with part 15 of the FCC Rules.