Version: V1.00.
LAUNCH Copyright Information Copyright © 2013 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of LAUNCH. The information contained herein is designed only for the use of this unit. LAUNCH is not responsible for any use of this information as applied to other units.
LAUNCH it unsupervised. •• Please use the included battery and charger. Otherwise, explosion may happen. •• Do not disconnect power abruptly when CRP-HD is being formatted or in process of uploading or downloading. Or else it may result in program error. Precautions on Operating Vehicle’s ECU •• Do not disconnect battery or any wiring cables in the vehicle when the ignition switch is on, as could avoid damage to the sensors or the ECU. •• Do not place any magnetic objects near the ECU.
LAUNCH IV CRP-HD User's Manual 3.8 Notification Bar..................................................................................... 6 5.3 Product Registration........................................................................... 11 3.9 Customize Your Desktop...................................................................... 6 5.3.1 Product registration.................................................................... 11 3.9.1 Move items on the desktop...................................
LAUNCH CRP-HD User's Manual 6.1.1 Configure an email account........................................................ 19 6.6.2 View installed applications......................................................... 22 6.1.2 Send an email............................................................................ 19 6.6.3 Uninstall applications.................................................................. 22 6.1.3 View an email............................................................................
LAUNCH 1 Introduction 1.1 Product Profile CRP-HD is a new Android-based vehicle trouble diagnostic tool specially developed for diesel and gas-fueled vehicle models of 12V&24V voltage. It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result. Using a 5 inch touch screen, it enables users to read/clear DTCs, record, save and playback data in live graphic display.
LAUNCH CRP-HD User's Manual 2.1 CRP-HD Display Tablet 2 Knowledge of CRP-HD There are two main components to the CRP-HD system: •• CRP-HD Display Tablet -- the central processor and monitor for the system (For details, please refer to Chapter 2.1.) Fig. 2-1 •• Diagnostic Main Cable -- the cable used to connect CRP-HD to diagnostic connector for accessing vehicle data Fig. 2-2 2 Fig.
LAUNCH CRP-HD User's Manual Table 2-1 formulates interfaces and indicators of CRP-HD display tablet: No. Name & Descriptions 1 Communication Indicator 2 Screen Lock/Power Button -- to turn the display tablet on/off with long press, or lock the screen with short press. 3 Power Indicator 4 Home Button 5 golo Button -- for quick access to IM (Instant Messaging) application 6 TF Card Slot -- to insert the TF card. 7 USB Port -- to connect the included power adaptor. 8 2.
LAUNCH 3 Preparations long time, CRP-HD could fail to be turned on. It results from low battery. In this case, please recharge your CRP-HD for a while and try to turn it on. 3.1 Charging CRP-HD 3.3.2 Power off 111 Press the POWER key, an option menu will pop up on the screen. 222 Tap “Power off” to turn off CRP-HD. 111 Remove the USB port cover from top of CRP-HD display tablet, and then connect one end of the included battery charger into it; 222 Connect the other end of the charger into AC outlet.
LAUNCH CRP-HD User's Manual 3.5.1 Lock the screen 1 to configure the CRP-HD system settings and to view Tap the general information about the Display Tablet. 2 Tap to display a list of applications that are currently running. To open an application, tap it. To remove an application, swipe it upwards. Press POWER key to activate the screen, and then drag the lock to “Unlock” position. 3 Tap to jump to the Android System’s home screen.
LAUNCH CRP-HD User's Manual Connected to a PC USB bound is activated Available Wi-Fi is detected Connected to Wi-Fi Notes: When the immediately. icon appears on the status bar, please charge it 3.8 Notification Bar The notification bar is used to display some activities, such as new messages, to do list and running tasks. You can also open the notification bar to view the reminder or activity notification. 3.9 Customize Your Desktop 3.9.
LAUNCH 111 On the main menu screen, tap Settings > Display > Sleep. 222 Choose the desired sleep time. 3.9.6 Set screen lock This function is designed to lock the screen and buttons to avoid accidental operations while CRP-HD keeps unattended. 111 On the main menu screen, tap Settings > Security > Screen lock. 222 Choose the desired screen lock mode and follow the on-screen instructions to finish your setting. 3.9.
LAUNCH CRP-HD User's Manual 2 To switch to numeric & symbol keyboard. 3 To enter a space. 4 > To delete the character before the cursor. > Long-press this key to delete all characters before the cursor. 5 Line feed. Note: For different input box, keyboard layout may vary. The figure shown as above is provided for reference purpose. 4 Wi-Fi Setting Note: Once Wi-Fi is set as ON, CRP-HD will consume more power. While Wi-Fi keeps unused, please set it off to save power.
LAUNCH 5 How to diagnose 5.1 Connections 5.1.1 Preparation Normal testing conditions CRP-HD User's Manual panel (dash), under or around the driver’s side for most vehicles. If Data Link Connector is not located under dashboard, a label should be there telling location. For some Asian and European vehicles, the DLC is located behind the ashtray and the ashtray must be removed to access the connector. If the DLC cannot be found, refer to the vehicle’s service manual for the location.
LAUNCH CRP-HD User's Manual main cable, and then connect the other end of diagnostic connector to the vehicle’s DLC socket. 333 Plug the other end of diagnostic main cable into the DB15 connector of CRP-HD, then tighten the captive screws. 5.2 Diagnosis Flowchart For new users, please follow the operation chart shown in Fig. 5-3 to get familiar with and start using CRP-HD. For non-OBDII vehicle, proceed as follows: 111 Locate vehicle’s DLC socket. 222 Select the corresponding non-16pin connector.
LAUNCH CRP-HD User's Manual 5.3 Product Registration 5.3.1 Product registration Make sure the diagnostic main cable is properly connected to CRP-HD before registering CRP-HD. Tap the icon on the desktop to launch the application, a disclaimer page will pop up on the window. Tap “I have read it” to enter the main function menu of diagnosis software, as indicated in Fig. 5-4. Fig. 5-5 2. Tap “Login” to enter the login interface: Fig. 5-4 1. Tap “Diagnostic” to enter the vehicle selection interface. Fig.
LAUNCH CRP-HD User's Manual 5.3.2 Main menu Fig. 5-7 4. Input the Verfication Code(can be obtained from the included password envelope) in ID field and a valid email address. Tap “Register” to register your CRP-HD. A confirmation dialog box will pop up on the screen, tap “Cofirm” to finish your registration and it will automatically enter the main menu screen. See Fig. 5-8.
LAUNCH CRP-HD User's Manual 5.3.3 Diagnostic software layout 7 1 5 Tap 6 Tap 7 Login button: Tap it to register your CRP-HD for the first time you launch this application. 8 Scroll bar: Slide it to scroll through the screen to display hidden parts. 9 Vehicle diagnosis software display area: Shows all available diagnostic software. 8 9 2 3 4 5 6 to return to the previous screen or exit the application. to find more applications. 5.
LAUNCH CRP-HD User's Manual By default, only those vehicle models in which new version is greater than local version are selected. To select all diagnostic software, check the box at the upper right corner. To deselect certain software, tap next to Version to uncheck the box. Tap to start downloading. Once it is complete, the system will decompress the software packages. Tap to return to the main menu screen. 5.
LAUNCH CRP-HD User's Manual Fig. 5-16 Fig. 5-14 4. Tap the desired protocol to enter. See Fig. 5-15. Note: The diagnostic function menus vary with different vehicles. 5.5.1 Read trouble code Tap “Read diagnostic trouble code” in function menu, the screen will display as indicated in Fig. 5-17. Fig. 5-15 5. Tap the vehicle system that you want to test or diagnose. Fig.
LAUNCH DTC Help: Select the desired diagnostic trouble code, then tap this link to launch the browser and retrieve the definition of the selected DTCs. Generally, there are three elements on DTC: CRP-HD User's Manual 5.5.3 Data stream Tap “Read data stream” in function menu, the screen displays as below: •• Suspect Parameter Number (SPN) – Indicates what function on the ECU has failed. •• Failure Mode Indicator (FMI) – Indicates in what way the function failed.
LAUNCH CRP-HD User's Manual : Tap it to select all data stream items. After selecting, tap To start to record, tap , the system will display data changes in waveform. ; To stop recording, tap . On data stream reading page, the following operations can be done: Fig. 5-20 To select certain data stream item, just tap be activated and will change into , then the selected item will . : Tap to select the desired data stream to be browsed, and then tap it to view the waveform.
LAUNCH CRP-HD User's Manual Tap certain diagnosis playback file (.x431) to view it. 5.8.2 Change Password On-Screen button definitions: This option allows you to change your login password. Delete: To delete the current report; Character: To view the diagnostic report in character form. Graph: To view the diagnostic report in waveform form. 5.8.3 Forgot Password This option lets you to retrieve your password via email. 5.8.4 Log Out 5.7 Update This option allows you to log out the system.
LAUNCH CRP-HD User's Manual 6 Others 333 After inputting, click , you can perform any one of the followings: Attach file, add CC/BCC, save draft, discard and setting. 6.1 Email 444 Tap The function allows you to send and receive email. You can add POP3 or IMAP email account for some common web email service provider. 6.1.3 View an email 6.1.1 Configure an email account Note: Before sending or receiving email, you have to set up an email account.
LAUNCH CRP-HD User's Manual notification settings. 1 Create a new tab. Note: Never change the default settings of the server, otherwise email failure may occur. 2 Close the current page. 3 Refresh the current page. 6.1.6 Delete an email account 4 Input a web address. Once Email account is removed, CRP-HD stops receiving the emails from this account, but all messages in it still keeps as it is. 5 Add the current page as bookmark. 6 Open search bar. 111 222 333 444 7 Open bookmark list.
LAUNCH 222 Tap CRP-HD User's Manual to enter bookmarks page. 6.3 Calendar 333 Long press it, you can share, open and delete the bookmark. This function lets you view calendar or create to-do events. 6.2.4 Set homepage . Tap the time in the upper left corner to Enter main menu screen, tap switch between Day, Week, Month and Agenda. This option enables you to set commonly visited website as the homepage. The homepage will be opened by default every time you launch your browser.
LAUNCH corresponding operations. 6.6 Applications 6.6.1 Install applications To install an application, you need to download it firstly. All items downloaded in default browser are saved in Downloads. 111 222 333 444 On the main menu screen, tap Downloads. Choose the desired .apk file. Tap “Install” to start installing the application. Tap “Done” to finish it. Note: In process of installation, a message prompting installation prohibited may appear. Please read it carefully.
LAUNCH 7 FAQ 1. How to save power? •• •• •• •• •• Please turn off the screen while CRP-HD keeps idle. Set a shorter standby time. Decrease the brightness of the screen. If Wi-Fi connection is not required, please turn it off. Disable GPS function if GPS service is not in use. 2. What should I do in case I forgot the screen lock? You can set screen lock as pattern or password. If you forgot the password, please consult your device provider or reset your device. Warning: Resetting may cause data loss.
LAUNCH Customer Service Department If you have any questions on the operation of the unit, please contact us: 1-877-LAUNCH-9 Statement: LAUNCH reserves the rights to make any change to product designs and specifications without notice. The actual object may differ a little from the descriptions in the manual in physical appearance, color and configuration.
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
