75 MM 150 MM 150 MM BACK COVER 140 MM Inside pages Cover 138 MM COVER INSIDE PAGES APN ref. no : B05140 Date : 06-03-2017 Vendor ref : no.
5 4 A B 1 2 5 C 6 Package contents⁄device parts 1 Band, ×2 2 Display module, removable 7 3 Display (OLED display) 3 8 4 Menu button 4 2 5 Clip 6 USB charger 7 Reset button 8 Optical sensor D 6
QR Codes Try it out now Just scan the QR code with your smartphone and find out more about the ALDI product you have purchased. Depending on your tariff plan you may be charged for the connection.
General information General information Reading and storing the user manual This user manual accompanies the wireless activity tracker (referred to below only as the “wristband”). It contains important information on start-up and use. Before using the wristband, read the user manual carefully. This particularly applies to the safety instructions. Failure to follow this user manual may result in severe injury or damage to the wristband.
General information Explanation of symbols The following symbols and signal words are used in this user manual, on the wristband or on the packaging. WARNING! This signal symbol/word designates a hazard with moderate degree of risk which may lead to death or severe injury if not avoided. CAUTION! This signal symbol/word designates a hazard with low risk that, if not avoided, may result in minor or moderate injury. NOTICE! This signal word warns against potential damages to property.
General information This symbol provides you with useful supplementary information on assembly or operation. Declaration of conformity (see chapter “Declaration of conformity”): Products marked with this symbol meet all applicable Community regulations for the European Economic Area. Google Play™ and Android™ are trademarks of Google Inc. Apple, the Apple logo, iPad and iPhone are trademarks of Apple Inc., registered in the USA and other countries. App Store is a service mark of Apple Inc.
Safety Safety Proper use The wristband is exclusively designed for recording your activity and sleeping habits and for exchanging data with smartphones and tablets. It is designed for collecting data for analysis with the Crane Connect app. You can use this data to help you reach your goals in terms of fitness, level of activity and sleep. The wristband is only intended for private use and is not suitable for commercial, therapeutic or medical applications. It is not a children’s toy or a medical device.
Safety Safety instructions WARNING! Danger of suffocation! Small children or animals may choke on the display module if swallowed. − If the display module is swallowed by children or animals, contact a physician immediately. − Keep the display module away from children and animals. WARNING! Risk of injury! Incorrect operation may result in severe injury.
Safety − If you have a pacemaker, be absolutely sure to ask your physician before using the wristband for the first time. WARNING! Danger of explosion! Rechargeable batteries may explode if they are excessively heated up. − Do not heat up the display module. − Keep the wristband away from hot surfaces. − Do not throw the display module in an open fire. − Protect the display module from direct sunlight. − Do not charge the rechargeable battery in the direct vicinity of hot surfaces or objects.
Safety WARNING! Danger for children and persons with impaired physical, sensory or mental capacities (e.g. partially disabled persons, older persons with reduced physical and mental capacities) or lack of experience and knowledge (e.g. older children).
Safety WARNING! Risk of chemical burns from battery acid! Leaking battery acid may lead to chemical burns. − Do not allow battery acid to come into contact with skin, eyes or mucus membranes. − In the event of contact with battery acid, immediately flush the applicable areas with plenty of clean water and consult a physician.
Safety CAUTION! Risk of injury! Incorrect operation may result in injury. − Do not use the wristband if it exhibits visible damages. − Do not open the housing of the display module and have qualified professionals perform repairs. Liability and warranty claims are waived in the event of repairs performed by the user or incorrect use.
Safety NOTICE! Risk of damage! Improper handling of the wristband may result in damage. − Keep sharp objects away from the wristband. − Store the wristband so that there is no risk of it falling into a tub or sink. − Do not take the rechargeable battery out of the display module; it is firmly integrated in it and cannot be replaced. − Only use the enclosed USB charger, which is connected to a computer or external power supply, to charge the empty rechargeable battery.
Checking the wristband and package contents Avoid strong magnetic fields (e.g. transformers). Otherwise, this may cause fluctuations in the transmission of the data measured. Checking the wristband and package contents NOTICE! Risk of damage! If you are not cautious when opening the packaging with a sharp knife or other pointed objects, you may damage the wristband. − Be careful when opening the package.
Functions 1. Take the wristband out of the packaging. 2. Remove the protective foil from the display 3 . 3. Check to make sure that the delivery is complete (see Fig. A). 4. Check whether the wristband or individual parts are damaged. If this is the case, do not use the wristband. Contact the manufacturer at the service address specified on the warranty card.
Functions • • • • • • • • • Time Notifications Measuring your pulse/workout mode Steps Distance Calories Active time Progress check Recording of sleep cycles with the Crane Connect app (waking up phase, light sleep phase, deep sleep phase) • Alarm function 20
Functions The Crane Connect app provides a detailed view for each target value. It provides you with an itemised view of the daily recorded data. The detail view for sleep mode offers the possibility of displaying your sleep phases (waking, light sleep and deep sleep). Data storage The wristband saves all measured data for seven days. From the 8th to 30th day, only the daily totals will be saved.
Functions Modes The wristband has eight different modes you can choose from: Mode Symbol • Time mode • Notification mode • Pulse and workout mode • Step counter mode • Distance mode • Calorie mode 22 no notification
Functions Mode Symbol • Active time mode • Sleep mode Notification mode In the Crane Connect app, you can select when the wristband should notify you about status messages from your smartphone or tablet. You can choose from incoming calls, calls in your absence, unread messages, unread e-mails and lost connections between the wristband and the paired smartphone/tablet.
Functions Mode Symbol • no notification no notification • call and missed call • message (SMS, Whatsapp, Skype, etc.) • E-mail • Bluetooth® connection interrupted Time mode Time mode is the first mode that appears on the display module. You can switch to the other modes from this mode.
Functions To switch modes, push the menu button 4 as follows, starting in time mode: − To switch to notification mode, push the menu button once. − To switch to pulse and workout mode, push the menu button twice. − To switch to step counter mode, push the menu button three times. − To switch to distance mode, push the menu button four times. − To switch to calorie mode, push the menu button five times. − To switch to active time mode, push the menu button six times.
Functions Pulse and workout mode The wristband measures your pulse as soon as you access this mode. The initial pulse is always 72 beats per minute (bpm). After a few seconds, your current pulse will appear on the display. After 45 seconds, it will stop measuring your pulse and the display will automatically switch off. While your pulse is being measured, you can also access the current workout data and time in pulse and workout mode.
Functions You can also select further settings in the Crane Connect app. For example, you can only have certain workout data shown on the display. Your current workout data is saved in the pulse and workout mode. At the end of the workout, you can access the workout data for the last workout in pulse and workout mode: − Average pulse, − Duration of the workout, − Distance covered, − Average running time per mile (pace), − Average speed, − Steps, − Calories burned.
Functions To monitor your pulse, the wristband records your pulse over a prolonged period of time. The period of time you defined with the desired interval can be configured or deactivated in the Crane Connect app. Step counter mode The wristband counts the steps you cover in a day. The more steps you cover during one day, the longer the progress bar at the top of the display will become. It shows you how close you are to reaching your target number of steps.
Functions Distance mode The wristband determines the distance you cover in one day in miles. The calculation is based on the steps counted and your individual data (step length, height, gender), which the wristband obtains from the Crane Connect app. The greater the distance you cover during one day, the longer the progress bar at the top of the display will become. It indicates current progress with respect to your target distance.
Functions Calorie mode The wristband calculates the calories you burn in a day. The calculation is based on your level of activity and your individual data (height, age, gender, weight, duration of sleep, etc.), which the wristband obtains from the Crane Connect app. The more calories you burn during one day, the longer the progress bar at the top of the display will become. It shows you how close you are to reaching your daily target.
Functions Active time mode The wristband calculates the amount of time you are active in hours and minutes. At 12 midnight, the activity time will automatically reset to zero. Sleep mode The wristband measures your sleep in hours and minutes. The wristband does not automatically recognise that you are sleeping – you have to activate sleep mode for this (see “Activating sleep mode”). You must wear your wristband at night so that it can record your sleep.
Functions the alarm symbol and current time will be shown in alternation on the display. − Push the menu button 4 to switch off the alarm. Compatible Bluetooth® devices The following devices with Bluetooth® 4.0 or higher are compatible with the wristband and the Crane Connect app: • Apple® iPhone® 4s and more recent versions • Apple® iPad® 3rd generation and more recent versions • Apple® iPad mini™ • Apple® iPad Air™ and more recent versions • Smartphones and tablets with Android™ 4.
Functions You can find a complete list of supported devices online at www.cranesportsconnect.com/compatibility.
Using the wristband for the first time Using the wristband for the first time Activating the display module for the first time • When you activate the display module, you will feel slight resistance when you push the menu button. However, do not let go of the menu button. • The wristband must be switched on once before you can charge the rechargeable battery. Fully charge the wristband before using it for the first time (see chapter “Charging the rechargeable battery”). 1.
Using the wristband for the first time Charging the rechargeable battery 1. Take the display module 2 out of the band 1 (see Fig. B) or out of the clip 5 . 2. Insert the display module into the USB charger 6 (see Fig. C). 3. Connect the USB charger e.g. to a computer. You can also use a mains adapter with a USB port to charge it (not included in the package contents). To access the charge level of the rechargeable batteries on the display, push the menu button 4 for three seconds in time mode.
Using the wristband for the first time Symbol Charge status 78–100 % 56–77 % 33–55 % 11–32 % 0–10 % − To determine if the rechargeable battery is completely empty, push the menu button. The symbol will appear on the display for three seconds.
Using the wristband for the first time Inserting the display module − Push the display module 2 into the band 1 or the clip 5 so that it is secure and cannot fall out. You have successfully assembled the wristband and can now use it. Putting on the wristband⁄clip • We recommend that you do not wear the wristband on your dominant hand. • Your pulse cannot be measured if the display module is used in the clip.
Operation − Or fasten the clip 5 with the display module e.g. on a trouser pocket, shirt, bra or belt. Operation Switching the display module on Once you have activated the wristband as described in the chapter “Activating the display module for the first time”, the chapter “Switching the display module on” is only relevant when the wristband has been switched off. − To switch the display module on, hold the menu button 4 down for 2 seconds. “How are you?” will appear on the display.
Operation Switching the display module off 1. In time mode, push the menu button 4 for 2 seconds. The display will show the icon, “Pair?” and “Off?”. 2. As soon as “Off?” appears, push the menu button to switch the display module off. Setting the time and time mode Time mode indicates the current time. This is automatically adopted by the Crane Connect app. In the app, you can set the time mode to 24 h or 12 h format.
Operation QR code for Android: QR code for iOS: To avoid long download times and the associated costs, it is recommended that you use a Bluetooth Wi-Fi connection for downloads. − Install the Crane Connect app on your smartphone. Follow the step-by-step instructions for this.
Operation Creating a user account To create a user account with the Crane Connect app, proceed as follows: 1. Start the Crane Connect app. 2. Follow the registration instructions step by step. 3. To perform user and product-specific settings, select the icon “All Settings”. 4. To create a new user or log on with an existing user, select the icon “User Settings”. Follow the subsequent instructions from the Crane Connect app step by step. You can also create new users on the website www.cranesportsconnect.
Operation Connecting the wristband with the Crane Connect app Make sure that the Bluetooth® function on your smartphone has been activated. 1. Once the user settings are complete, return to the “All Settings” menu. 2. Select the icon “Activity Tracker”. You can make further settings for optimal use of your wristband. 3. To connect the wristband with your smartphone, select “Connect” in the “Pairing” field. A notification window will appear. 4. In this window, press “Pair now”.
Operation 5. Push the menu button again. “Pairing...” will appear for approx. 20 seconds on the display. During this time, the wristband will connect with your smartphone. Once the connection has been successfully established, the symbol will appear on the display. If the connection cannot be created, the symbol will appear on the display (see chapter “Troubleshooting”). 6. Once you have successfully connected the wristband with your smartphone, return to the “Home” menu. 7.
Operation Configuring notifications 1. On your smartphone or tablet, open the Crane Connect app and access the settings for the wristband. 2. Scroll down to “Alert settings”. 3. Activate the desired notification functions by pushing the corresponding slider to the right ( ). If you would like to configure how the wristband is to alert you of a notification, push the arrow to the right of the slider.
Operation Notifications: Symbols and signals To be able to receive notifications, your smartphone or tablet must be within Bluetooth® range. The wristband will display the last 10 notifications. If a call is received on your smartphone or if you have missed a call, the wristband will notify you with the signals configured in the app. The symbol will appear if you have enabled “Display” in the settings.
Operation The symbol will appear if you have enabled “Display” in the settings. If the Bluetooth® connection between the wristband and smartphone or tablet is interrupted, the wristband will notify you with the signals configured in the app. The symbol will appear if you have enabled “Display” in the settings. Displaying notifications An interrupted Bluetooth® connection is automatically restored as soon as you are within range of your smartphone or tablet.
Operation 2. Push the menu button again for 2 seconds to display the last 10 notifications. • The notifications will be displayed in chronological order. • Each notification will be shown for 3 seconds. • You can also manually access the notifications by pushing the menu button. • Push the menu button again to return to notification mode. Using the wristband without the Crane Connect app You can also use the wristband without the Crane Connect app.
Operation Without the Crane Connect app, you cannot adjust the factory default targets to your individual goals. The following are set as factory defaults: • Target steps: 10,000 steps • Target distance: 3.5 miles • Calorie consumption: 3,000 kilocalories To set the time, push the reset button 7 at 12 noon. This will set the time to 12:00. The “Notifications” function cannot be used without connecting to the Crane Connect app.
Operation Activating pulse and workout mode If you start the pulse and workout mode, the initial pulse of 72 bpm is shown. After a few seconds, your current pulse will appear on the display. After 45 seconds, pulse measurement will stop and the display will switch off. You can also start a workout in this mode: 1. To start your workout with pulse measurement, push and hold the menu button 4 down for 2 seconds. “Start?” will appear on the display. 2. Push the menu button to start the workout.
Operation 3. To stop your workout, hold the menu button down for 2 seconds. “Stop?” will appear on the display. 4. Push the menu button to stop the workout. “ STOP” will flash on the display for three seconds. You can also access the current workout data while measuring the pulse. For this, the Crane Connect app allows you to select either automatic alternation or manual alternation. If automatic alternation is selected, all workout data is shown for 2 seconds on the display. The display then switches off.
Operation Viewing the workout data Once you have finished your workout, you can view your workout data. The wristband saves the workout data for the last ten workouts recorded. When the workout data is synchronised with the app, it is automatically deleted on the wristband. Only the data from the last workout can be accessed under “Record”. 1. Access the pulse and workout mode. Push and hold the menu button 4 down for 2 seconds. “Start?” will appear on the display. 2. Wait 2 seconds.
Operation Activating sleep mode Wear the wristband when you go to bed and activate sleep mode as follows: 1. In sleep mode, hold the menu button 4 down for 2 seconds. “Sleep?” will appear on the display. 2. Push the menu button again to activate sleep mode. The icon will appear on the display. Sleep mode has now been activated. The duration and quality of your sleep will now be recorded. You can view the data collected via the Crane Connect app.
Operation Deactivating sleep mode 1. After waking up, hold the menu button 4 down for approx. two seconds. “Wake?” will appear on the display. 2. Push the menu button to end sleep mode. The icon followed by the duration of your last sleep will briefly appear on the display. Restoring the wristband If the wristband does not respond, push the reset button 7 on the back of the display module 2 . The display 3 will turn on after a few seconds. This will not delete the data on the wristband.
Care and maintenance Care and maintenance Cleaning the wristband NOTICE! Risk of damage! Improperly cleaning may lead to damage. − Do not use any aggressive cleaners, brushes with metal or nylon bristles or sharp or metallic cleaning utensils such as knives, hard scrapers and the like. They could damage the surfaces. − Use a soft brush, a small amount of water and a mild soap to clean the band 1 . − Wipe the display module 2 off with a soft, damp (if necessary), lint-free cloth.
Care and maintenance − Let the band and display module air dry completely before storing them. − Make sure that there are no deposits on the optical sensor 8 on the bottom of the device. This will ensure an accurate pulse measurement. Storing the wristband NOTICE! Risk of damage! Improper handling of the wristband may result in damage. − Store the wristband in a suitable location between -10 °C and +50 °C. − Keep the wristband away from direct sunlight. − Store the wristband in a clean, dry area.
Troubleshooting Troubleshooting Use the following information and the FAQs (frequently asked questions) on our website to rectify faults yourself: www.cranesportsconnect.com/faq.php Fault Solution Not all of the data measured were transferred. If you have not synchronised with the Crane Connect app in the last 30 days, the data measured prior to then will be overwritten. The optical sensor for the pulse measurement on the back of the device is dirty.
Troubleshooting Fault The wristband and your smartphone will not connect. 58 Solution − Switch Bluetooth® off on your smartphone and then back on. − Then restart the connection process with your wristband. − Switch your smartphone off and then back on. − Activate the visibility of your smartphone in the Bluetooth® menu. − Reinstall the Crane Connect app on your smartphone. − Check the compatibility (see chapter “Compatible Bluetooth® devices”).
Technical data Measurement ranges Pulse Steps Calories Distance Workout time Rechargeable battery Type: Capacity: Voltage: Charging current: 40–225 bpm 0–99999 0–99999 kcal 0–99.99 miles 0–09:59:59 Lithium polymer rechargeable battery 50 mAh 3.
Disposal Disposal Disposing of the packaging Dispose of the packaging separated into single type materials. Dispose of paperboard and cardboard with waste paper and films with recyclable waste.
Disposal Disposing of the wristband Old devices must not be disposed of with household waste! This symbol indicates that this product must not be disposed of together with domestic waste in compliance with the Directive (2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE). This product must be disposed of at a designated collection point. The product can e.g.
Disposal Batteries and rechargeable batteries may not be disposed of with household waste! As the end user you are required by law to bring all batteries and rechargeable batteries, regardless whether they contain harmful substances* or not, to a collection point run by the communal authority or borough or to a retailer, so that they can be disposed of in an environmentally friendly manner. Turn in the battery at your collection point in a discharged state only.
Customer service Customer service 65
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
