LED Wrist Band Instruction Manual
Table of Contents 1.0 2.0 3.0 4.0 Introduction Specifications Description and Settings of the LED Wrist Band 3.1 Mode selection of the LED Wrist Band 3.1.1 Details of each Mode – General Information Display 3.1.1.1 Daily Goal Level 3.1.1.2 Move Time and Active Time 3.1.2 Details of each Mode – Daily display 3.1.3 Step Display 3.1.4 Distance Display 3.1.5 Calories Burnt Display 3.1.6 Workout Mode Display 3.1.7 Workout Record Mode Display 3.1.8 Sleeping Mode 3.1.
1.0 Introduction Thank you for your purchase of the LED Wrist Band. With this band, you can monitor your daily activities easily! Simply put the band on your wrist and this small device will record the number of steps taken, the distance travelled, the calorie burnt and the sleeping patterns in your daily activity for your review. 2.0 Specifications How to place the main unit into the Wrist Band Place the main unit into the socket of the wrist band with the mode button facing upward and matching the bulge.
3.1 Mode Selection 3.0 Description and Settings of the LED Wrist Band Different modes can be selected as below sketch. When the display is scrolling, you may press the mode button once to select the next mode. The LED Wrist Band has only one mode button to control all functions.
3.1.3 STEP Display 3.1.1.1 Daily Goal Level Press the mode button once again while the previous display is still on, the following display will scroll on the screen. When the STEP display doesn’t appear, press the mode button until the STEP display appears provided that the STEP display has been switched ON in the device. For more details, please refer the Chapter 4.2.5.6.1.4.
3.1.5 CALORIES Burnt Display Press the mode button once again while the previous display is still on, the following display will scroll on the screen. When the CAL display doesn’t appear, press the mode button until the CAL display appears provided that the CAL display has been switched ON in the device. For more details, please refer the Chapter 4.2.5.6.1.4. 3.1.7 WORKOUT RECORD Mode Display You can review your last workout information in the REC mode. Press the mode button once.
4.0 Home 3.1.9 Battery Status and Charging Settings: Pairing to an iOS Product In any mode, press and hold the mode button until it displays MENU and then release it. The Battery Icon will scroll on the screen. The battery status indications are as below: 0-20% tap “Pair” to start scanning 21-40% 41-60% Battery Status Display 61-80% 81-100% When the battery is low, please plug the main unit into the USB-socket and plug it into any computer for charging.
4.2 Settings for the LED Wrist Band via your device Run through the same process in Chapter 4.0 except downloading the software process. Select the Home menu button on the main page and then select Settings. In the Settings menu, you can set the LED Wrist Band and all relative parameters. You can set your daily goals by inputting the expected number of Steps taken, Distance to travel and Calories to burn in these fields.
4.2.4 General Settings Unit – you can choose Metric or Imperial unit for the display. Hour Display – you can choose 12-hour or 24-hour format display. 4.2.5.2 Auto Stride Enable This function is used to quantify your activities in terms of Steps, Distance travelled and Calories Burnt using your personal profile’s information when it is switched ON. When this function is switched off, you have to input the Walk Stride and Run Stride in order for the device to quantify your activities. 4.2.5.
4.2.5.6 Customize LED Screen In this mode, different displays can be set to ON or OFF in the LED Wrist Band. Tap on this function, below sketches will appear. When you tap on the corresponding legends, they can be set to ON or OFF. 4.2.5.6.1.3 Workout Mode When you start the Workout mode in your LED Wrist Band, the following information will be shown on the screen when you press the mode button.
8.0 Wristband Main page 6.0 Workout History In this mode, you can review your Workout History and individual summary. In the Home Menu, tap the Workout History, the screen appears as below sketch 1. This page lists out all the Workout you have done with Date, Duration and Distance. In each row, tap the arrow will move to the 2nd page which corresponds to the summary of the individual workout. 8.1 Home This page shows the current performance and basically similar information as your LED Wrist Band.
8.5 Active Time 8.3 Distance The fourth row shows the distance travelled with Percentage completed icon compared with the set goal. When you tap on this row, the screen will move to a more detailed display which shows the total distance travelled, Percentage completed icon compared with the Goal, Distance to go, the Set Distance Goal, Daily goal icon and a detailed bar chart as the sketch. This bar chart shows the frequency of the distance travelled against time during the day.
8.7 Sleep Time Swipe the screen to the left from the Summary page, below page will appear. Swipe to the left → Summary with Bar Chart This page shows the pattern and quality of your sleep of last night. You can swipe or drag on the horizontal bar to the left and right to check the sleeping pattern and quality against time. You can also check different days’ sleeping pattern and quality by tapping the arrows in the second row or tap on the Calendar icon to select a specific day to review.