Caution : You must read this before you proceed Armless Chair Label Picture Description QTY A Backrest with Leg 1 B Left Panel with Leg 1 C Right Panel with Leg 1 Page 1 OF 30
D Seat 1 E Back Cushion 1 F Seat Cushion 1 Description QTY ① Bolt (M6*40mm) 11 ② Washer 11 ③ Allen Key 1 Label Picture Before Beginning Assembly: Page 2 OF 30
Over View Backrest with Leg(A) Back Cushion(E) Seat Cushion(F) Seat(D) Left Panel with Leg (B) Right Panel with Leg(C) This Armless Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Armless Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Attach the Seat(D) to Right Panel with Leg(C) using Bolts(①) and Washers( ②) with Allen Key(③). Do not fully tighten the bolts. Step 3 Place the Left Panel with Leg(B) facedown on the clean and soft suface. With the help of your adult partner, place the Backrest with Leg(A) against Left Panel with Leg(B). Attach the Left Panel with Leg(B) to Seat(D) and Backrest with Leg(A) using Bolts(①) and Washers( ②) with Alley Key(③). Tighten all Bolts at all joints completely at this stage.
Step 4 Place the Armless Chair on a level surface to check the wobbles. If the Armless Chair wobbles, adjust the Levelers on the bottom of the Legs to make it level. Step 5 Place the Seat Cushion(F) and Back Cushion(E) on the Armless Chair. Your Armless Chair is ready for use. This Armless Chair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Left Armchair Label Picture Description QTY G Backrest with Leg 1 H Left Armrest with Leg 1 I Right Panel with Leg 1 Page 7 OF 30
J Seat Back Cushion E F Label ① 1 Picture 1 Seat Cushion 1 Description QTY Bolt (M6*40mm) 11 ② Washer 11 ③ Allen Key 1 Assembly: Page 8 OF 30
Overview Back Cushion (E) Left Armrest with Leg (H) Backrest with Leg (G) Seat Cushion (F) Right Panel with Leg (I) Seat (J) This Armchair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Armchair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Place the Left Armrest with Leg(H) facedown on a clean, non-marring surface. Place the Backrest with Leg(G) on the Armrest with Leg(H) being sure to insert dowel on Armrest with Leg(H) into mounting position on Backrest with Leg(G). Attach Backrest with Leg(G) to Left Armrest with Leg(H) using Bolts( ①) and Washers(②) with Alley Key(③) Do not fully tighten the bolts. Step 2 Place the Seat(J) onto the Backrest with Leg(G) and Left Armrest with Leg(H) as shown.
Step 4 Place the Armchair on a level surface to check the wobbles. If the Armchair wobbles, adjust the Levelers on the bottom of the Legs to make it level. Step 5 Place the Seat Cushion(F) and Back Cushion(E) on the Armchair. Your Armchair is ready for use. This Armchair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Right Armchair Label Picture Description QTY K Backrest with Leg 1 L Right Armrest with Leg 1 M Left Panel with Leg 1 Page 13 OF 30
J Seat 1 E Back Cushion 1 Seat Cushion 1 F Description QTY ① Bolt (M6*40mm) 11 ② Washer 11 ③ Allen Key 1 Label Picture Before Beginning Assembly: Page 14 OF 30
Overview Back Cushion (E) Right Armrest with Leg (L) Backrest with Leg(K) Seat Cushion (F) Seat (J) Left Panel with Leg (M) This Armchair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Armchair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Place the Right Armrest with Leg(L) facedown on a clean, non-marring surface. Place the Backrest with Leg(K) on the Armrest with Leg(L) being sure to insert dowel on Armrest with Leg(L) into mounting position on Backrest with Leg(K). Attach Backrest with Leg(K) to Left Armrest with Leg(L) using Bolts(① ) and Washers( ② ) with Alley Key(③ ) Do not fully tighten the bolts. J Step 2 Place the Seat(N) onto the Backrest with Leg(K) and Right Armrest with Leg(L) as shown.
Step 4 Place the Armchair on a level surface to check the wobbles. If the Armchair wobbles, adjust the Levelers on the bottom of the Legs to make it level. Step 5 Place the Seat Cushion(F) and Back Cushion(E) on the Armchair. Your Armchair is ready for use. This Armchair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Ottoman Label Picture Description QTY O Top Panel 1 P Front/Back Panel 2 Q Side Panel with Legs 2 Page 19 OF 30
U Seat Cushion 1 Description QTY ① Bolt (M6*40mm) 13 ② Washer 13 ③ Allen Key 1 Label Picture Before Beginning Assembly: Page 20 OF 30
Overview Seat Cushion(U) Top Panel(O) Front Panel(P) Side Panel with Leg(Q) This Ottoman has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Ottoman parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all parts on a clean, non-marring surface.
Step 2 Place the Top Panel(O) facedown on a clean and soft surface. With the help of your adult partner, turn the Table Frame over and place it onto the Top Panel(O) as shown above.
Step 3 Place the Ottoman on a level surface to check the wobbles. If the Ottoman wobbles, adjust the Levelers on the bottom of the Legs to make it level. Step 4 Place the Seat Cushion(U) on the ottoman. Your Ottoman is ready for use. This Ottoman can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Table Label Picture Description QTY R Top Panel 1 S Front/Back Panel 2 T Side Panel with Legs 2 Page 25 OF 30
Label Picture Description QTY ① Bolt (M6*40mm) 13 ② Washer 13 ③ Allen Key 1 Before Beginning Assembly: Page 26 OF 30
Overview Top Panel(R) Side Panel with Legs(T) Front Panel(S) This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all parts on a clean, non-marring surface.
Step 2 Place the Top Panel(R) facedown on a clean and soft surface. With the help of your adult partner, turn the Table Frame over and place it onto the Top Panel(R) as shown above. Attach the Top Panel(R) to the Front and Back Panels(S) and Side Panels with Legs(T) using Bolts( ①), and Washers( ② ) with Alley Key(③ ) Tighten all Bolts at all joints completely at this stage.
Step 3 Place the Table on a level surface to check the wobbles. If the Table wobbles, adjust the Levelers on the bottom of the Legs to make it level. Step 4 Your Table is ready for use. This Table can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
