HOME THEATER SEATING USER GUIDE
GET READY Unpack the box Seat Base Seat Back Rubber Foot Pads Please read all instructions carefully before starting the assembly. It is recommended using two adults throughout the process. 1 - Prep the Furniture Remove all packaging materials from the seat base and the seat back. 2 - Attach the Seat Back Slide the metal female receivers located on both sides of the seat back onto the male steel mechanism posts attached to the seat base.
4 - Configure Your Layout When placing the theater seats, please note that they do not connect to each other. Each seat weighs over 100 pounds so when placed in position they won’t move. The diagrams below will assist you in visualizing how to place the seats based on your desired configuration. Please note there are several ways each configuration can be put together so yours might vary slightly.
HOW TO RECLINE Models with Power Recline • • • • Plug the theater seats into a power source, such as a wall outlet or surge protector. Locate the two buttons to recline the seat up and down. Depending on the model purchased this will be situated on either the rim of the cup holder or on the inside arm. Press and hold the button to recline the seat until you have reached your desired position, then release. To bring the chair back up follow the same procedure as above, but with the other button.