Quick Setup Instructions

LaserPecker 2 Operation Instruction Manual
Download APP
4.APP download and o peration 5.Product specification s
Technical Support
Engrave on the electric lifting bracket
Method 1:
Handheld engraving
Method 2:
Supplementary Installation Instructions:
Sliding engraving
Method 3:
Power up the main unit and
the electric brackets.
Connect Bluetooth
Weight
Laser source 5000mW NICHIA
Casing
Data transmission
Input format
Device connection
method
Operating system
Input power
Operating temperature
range
Operating humidity
range
Bluetooth, USB
Support iOS 9.0+, Androi d 6.0+, Mac 10+,Windows 10+
AC(100-240V, 50-60Hz), DC(12V5A)
0 -65
5%~80% Non-condensing
7 patentsPatents application
Size
6.Safety guidelines
7.Matters needing atten tion
3.Quick setup instructions
8.Disclaimer
9. Warning
10.Copyright statement
11.Warranty terms
1.Product accessories listTable of Contents
Optimal distance
110mm
Electric lifting bracket
Main unit
Laser protection
shield
Power supply
Portable power
supply
USB C cable ×2 Laser protection
goggles
Third axis
2.Button/Indicator description
1. Preview but ton
2. Pause (ta p)/End (hold) button
3. Main unit indic ator light
4. Main unit indic ator light
5. Hold to co ntinuously rise/Tap to rise 0.3mm
6. Electric br acket power indicato r
7. Hold to co ntinuously descend /Tap to
descend 0.3 m m
1. Power outle t for electric bracke ts
2. Power outle t for laser protect ion
shield ventilat ion fan
3. Main unit D C power interface
( 5.5mm/2.1m m jack)
4. Power input in terface of elect ric
brackets
5. Ventilation fan
1. The third axis p ower interface
2. The third axis c onnection indica tor
3. The third axis p ower input inte rface
4. The third axis a uxiliary sliding
module
Main unit/electric lifting
bracket indicator
Standard
Optional
Power interface
The third axis indicator and
power interface
Album Camera Creation Library
Ruler Wrench & Screws
Place the object to be engraved and adjust the height.
Follow APP instructions to engrave.
Target surface
Laser emission plate
Important note
1
3
4
2
5
6
7
1
1
3
4
2
3
5
4
2
1 Secure the main unit on the elec tric lifting bracket
and connect the power.
1
1
2 Place the targe t object and adjust the height of
the lifting brac kets.
Target
surface
Target surface
Target surface
L-shaped
ranging rod
Optimal distance
110mm
Target surface
of cylindrical
or flat object
3 Mount the lase r protection shield at the bottom
of the main uni t and connect to power outlet.
2 3
Dust filter on the back of host can be removed for cleaning
1.1 2
4 Setup is comple ted. Follow APP instructions to
engrave.
Homepage
Album Camera
Creation Library
Homepage
Album Camera
Creation Library
Homepage
Album Camera
Creation Library
1. Product accessor ies list
2. Button/Indicator de scription
3. Quick setup instruc tion
4. APP download and operation
5. Product specificatio ns
6. User safety guide lines
7. Matters needing at tention
8. Disclaimer
9. Warning
10. Copyright statement
11. Warranty terms
Main unit: 162.5*60*122mm
Bracket: 194*153.5*236mm
Range of lifting height 0~120mm
G-code, common image formats including ,
JPG, PNG and more
Laser wavelength
1748g
Anodized aluminum alloy
Bluetooth 5.0
450nm
Safety certifications
DC power
interface (ci rcular)
Assembled s tate Disassembled state
Power interface of
third axis
Power input i
nterface of th ird axis
Power interface
of electric brac ket
Power input
interface of
electric bracke t
Power interface of
laser shield
The distance between the laser emission plate and the target surface should be 110mm. For
your convenience, rotate the L-shaped ranging rod to down position, adjust the height of the
lifting bracket so that the bottom of the ranging rod should be just touching the target surface
(or on the same level if the shape of the target object limits their contact).
Mount the laser protectio n shie ld a t the
bottom of the main unit and c onnect the
power.
Face th e third-axis r ollers down on the
target su rface , use the third a xis bracket
to mount the main unit onto the third axis,
and finally co nnect the power.
Alternatively, pla ce t he third-axis on the
base of t he ele ctric lifting b rackets, with
rollers facing up, place a cy lindrical or flat
object on the rollers, and finally connect
the power.
Hold the handle of the main unit and push
against the tar get surface.
Setup completed. Follow A PP instruc tions
to engrave.
Setup completed. Follow A PP instruc tions
to engrave.
Installation method three: sliding engraving, the third axis,
electric lifting bracket, laser protective cover,Description of
the power supply connections between the three accesso-
ries and the main unit
Method 1: Search for [LaserPecker] in APP m arkets
such as Huawei App Gallery, Google Play Store, and
Apple App Store to download.
Method 2: Scan the QR code on the right accordingly
to download the APP.
Method 3: Download the APP from our official website
www.laserpecker.net.
Lay down the L-shaped ranging
rod, and adju st the height of the
bracket so that the bottom of the
ranging rod just touches the
engraving surface. After adjusting,
the ranging rod should be
retracted.
Select desired content to be engraved on the APP’s homepage and start
engraving
IEC 60825-1(Laser Level-1 Safety Specification)
CE ROHS FCC FDA CDRH r egistration, IEC
60825-1(Laser Level-4 KC NCC TELEC
We offer global technical support. If you encounter any problems, please email
[e-mail]. We will get back to you as soon as possible.
Manufacturer: Shenzhen Hingin Technology Co., Ltd.
Phone: [phone]
During an ongoing engraving job, do not move device to prevent triggering an
emergency stop for safety concerns.
The copyright of this manual is the ownership rights of the software and hardware
involved in the pr oduct, which belong to S henzhen Hingin Technology Co., Ltd.
(hereinafter referred to as [Hingin T echnology]). LaserPecker i s a registered
trademark of Hingin Technology.
© 2020-2030 Shenzhen Hingin Technology Co., Ltd. All rights reserved
The information in this manual is subject to change without notice; and the
information in this manual does not constitute a commitment of the c ompany.
Please refer to our webpage (https://www.laserpecker.net) for the most
up-to-date updates.
Except for the person who purchased this product, if without the written permission
of the company, the contents of this manual shall not be rewritten and forwarded
in any form or for any purpose.
To the extent permitted by law, the warranty terms are exclusive and replace all
other express or implied or statutory warranty conditions, including in a special
purpose, statutory or any other circumstances, including but not limited to the
suitability of the product for a particular purpose Any responsibilities derived from it.
In addition, Hingin Technology will not be responsible for any accidental, special,
indirect or derivative damage (which may originate from use, misuse, non-use, or
product defects).
When consumers apply f or warranty service, they are obliged to back up all
important information and data in advance. During the maintenance process,
such as replacing parts or updating the product software, the data will disappear.
Hingin Technology does not provide data backup or the integrity of related data
and settings.
The product enjoys free shipping and free repair warranty service within 15 days of
the shipment date, and the express delivery fee is required to pay 15 days after the
shipment to the warranty period.
Any product after replacement or repair will have the remaining warranty period
of the original product or a 30-day warranty after the replacement. Hingin Technol-
ogy will give the longer warranty of the two.
Any product after replacement or repair will have the remaining warranty period
of the original product or a 30-day warranty after the replacement. Hingin Technol-
ogy will give the longer warranty of the two.
Before operating LaserPecker2, please read the contents of this manual carefully
and strictly abide by the operating procedures.
There may be risks in the laser engraving process. The user should carefully consider
whether the target material is suitable for laser engraving.
LaserPecker 2's designed power input is DC 12V5A. It should only be powered by a
power supply of correct specifications. It is strictly forbidden to over- or under-load
the engraver with an unsuitable power supply . You must ensure the AC power
socket is properly earthed to prevent risk of electric shock.
This product is equipped with very sophisticated components and dangerous laser
source . It is strictly forbidden to place the equipment near electrical appliances
with strong electromagnetic interference. The user must avoid direct exposure to
either high or low power laser beam emitted from this device.
It is s trictly forbidden to place any irrelevant total reflection or diffuse reflection
objects in the device to prevent the laser from being reflected to undesired places.
Before using this product to engrave anything, please make sure that the emissions
produced by laser irradiation of the engraved objects comply with local laws and
regulations.
This device uses Type-4 lasers (strong laser radiation). The laser radiation may cause
the following accidents: 1) Ignite the surrounding flammable materials; 2) Different
materials may produce byproducts such as various radiation, harmful and toxic
gases when heated by laser.3) Direct exposure of to laser radiation can cause
injury to human and animals. Therefore, the operator must keep a distance from
the laser source and wear protective equipment (such as laser protection goggles,
protective covers, protective clothing, or firefighting equipment, etc.). It is strictly
forbidden to place flammable and explosive materials near an operating laser
engraver. The operator must maintain good ventilation of the working
environment.
Thank you for purchasing LaserPecker 2. The contents mentioned in this article is
related to your safety, legal rights and responsibilities. Before using this product,
please read this article carefully to ensure that you have the correct setup for the
product. Failure to follow the instructions and warnings in this document may cause
injury to you and surrounding personnel, or cause damage to LaserPecker2 or other
surrounding items. Once you use this product, you are deemed to have carefully
read the disclaimer and warning information, understood, recognized, and
accepted all terms and contents of this statement. You promise to take f ull
responsibility for the use of this product and the possible consequences. You
promise to use this product only for its designed purposes, and agree to these
terms, any relevant regulations, policies and guidelines formulated by Hingin.
LaserPecker 2 is not responsible for any damage, injury or any legal liability caused
by the direct or indirect use of this product. Users should follow all safety guidelines
including but not limited to the safety guidelines mentioned in this article.
Before setting up LaserPecker2, please first check that the equipment is in good
condition and the mirror of the laser is clean.
If you need to move the device or the target object, please do so before or after
an engraving job. You must not move neither the engraver nor the object when
the device is engraving.
Laser is dangerous, please do not let minors, children or anyone without
sufficient self-protection awareness approach the device du ring an ongoing
engraving job.
Before engraving anything, please check that the target objects will not release
toxic and harmful gas during the process, to avoid poisoning accidents or
damages to the device itself.
If you find excessive odor and/or smoke during engraving, please use a fan to
blow it away or stop engraving and move your setup to a well ventilated place.
Before engraving, check whether the target surface h as total reflection or
diffuse reflection characteristics. Pay additional attention to safety protection
for such objects. It is recommended to use a black whiteboard marker to darken
the target surface before engraving.
Do not expose skin or eyes of humans or animals directly to laser to avoid
permanent damage.
Due to th e limited power of LaserPecker2, it is not yet possible to directly
engrave very hard materials such as metal and glass. However, some materials
can be engraved after coating with a common black whiteboard marker or
thermal transfer paper.
Please read [Safety guidelines] carefully, and familiarize yourself with the correct
operation procedures.
This product does not contain any user-replaceable components. Never
attempt to disassemble LaserPecker or troubleshoot the problem by yourself.
An operating LaserPecker emits strong laser beam which will burn skins, especial-
ly eyes of human and animals, causing serious damage. In addition, it will also
damage screens of mobile phones,tablets, and any oth er electronic devices.
Correct use and maintenance of this product is extremely important to ensure
safe operations. Please strictly follow the instructions in this manual.
When using LaserPecker, you must wear laser protection goggles at all times.
Installation regulation: Before operating LaserPecker2, please refer to the
instruction manual to securely mount the main unit with supplied acc essories
(shield, electric lifting bracket or third axis) or other stable support such as tripods
for DSLR c ameras (not mini tri pods) to avoid dam age due to unstable
placement.
Please make sure a correct power supply (DC 12V5A) is used to power the main
unit.
Before engraving, please make sure to take sufficient protective measures. For
example, install a protective shield, wear laser protection goggles to prevent the
laser from acci dentally injuring your eyes or skin.Remove irrelevant nearby
objects items to prevent unnecessary damage due to laser reflections, especial-
ly flammable and explosive materials to prevent fire.
Launch Lase rPecker APP, search for your
device:
Flashing blue ligh t o n the main unit
indicate th e device is standi ng by fo r
Bluetooth c onnection;
Solid blue light on the m ain unit i ndicate
device is co nnected.
Note: After installing the APP, pl ease read the warnings and instructions in th e
APP carefully to ensure that the product is used correctly.
Scan QR code to
download the APP
Electric b racket
power in terface
DC main u nit
power in terface
Hold to
continuously
descend/Tap
to descend
0.3 mm
Loosen the lower
screw to adjust the
angle of the main
unit as needed
Hold to
continuously
rise/Tap to
rise 0.3mm
The electric bracket is
connected with the
bottom plate by
vertical pole
Hold to continuously
descend/Tap to
descend 0.3 mm
Hold to continuously
rise/Tap to rise 0.3mm
Lay down the
L-shaped
ranging rod
Note:
For products sold in non-Mainland China regions, when consumers apply for
warranty service from Hingin Technology, if the products cannot be sent back to
Hingin Technology for warranty service due to the laws and regulations, safety
regulations, tariffs, m aintenance technology and parts inventory of various
countries and regions, sales in some countries and regions, Hixing Technology can
only provide limited warranty service. Therefore, consumers in non-Mainland China
regions, regardless of whether they are covered by th e warranty, need to seek
warranty service at the store authorized by the original country of purchase, and
will be charged for inspection and manual processing. If th e recipient’s country
has additional tariffs, it will be borne by consumers; consumers who directly apply
for warranty service from Hingin Technology will be handled in a similar manner.
Dealers may s ell Hingin Technology products they distribute to consumers in
non-Mainland China areas. If they provide value-added services that are different
from this warranty, the service is only valid for the area sold by the distributor. It is
irrelevant to this warranty service.
Processing quality is highly related to user operation, processing material and
processing environment, and is not covered by the warranty.