Instruction Manual

• Sight-in ﬁrearms quickly & economically

• Automatically activates when bolt is closed

• Installs in seconds

• Get on paper the ﬁrst shot

Battery Replacement:

Requires 3 - 348 batteries

Unscrew the back of the laser located near the rim

of the cartridge.

Take out old batteries and insert new batteries with

negative (-) facing out.

Screw the cap back on all the way.

DANGER

LASER LIGHT

AVOID DIRECT EYE EXPOSURE

POWER OUTPUT < 5mw

WAVELENGTH 630-670mm

CLASS IIIa PRODUCT

A Division of P&L Industries

101 Airpark Road - Cottonwood, AZ 86326

Phone 928-649-3201 - Fax 928-649-3970

www.LaserLyte.com

WARRANTY:

One Year Limited

Warranty.

LAS-17H

Patents Pending

PAGE 1
Battery Replacement: Requires 3 - 348 batteries 1 Unscrew the back of the laser located near the rim • Sight-in firearms quickly & economically of the cartridge. 2 Take out old batteries and insert new batteries with negative (-) facing out. • Automatically activates when bolt is closed • Installs in seconds • Get on paper the first shot 3 Screw the cap back on all the way. 1 2 LAS-17H Patents Pending - 3 WARRANTY: One Year Limited Warranty.
PAGE 2
17 HMR Cartridge Bore Tool 1 LAS-17H 5 Laser Dot 2 Sight In: 1 UNLOAD YOUR FIREARM! ALWAYS POINT IN A SAFE DIRECTION. 2 Insert laser into the chamber of the firearm. Do not pull the trigger with the bore tool in your chamber. 3 Close bolt and laser will turn on. 4 Shine laser dot 25-30 yards/meters. 5 Adjust cross hairs directly on top of the laser dot. 6 REMOVE BORE TOOL! 7 Go to shooting range and fire first 100 yard/meter shot. Make final adjustments.