6 PIECE OUTDOOR FURNITURE ASSEMBLY INSTRUCTIONS
WARNING Seller and Manufacturer disclaim all and any liability for property damage, personal injury, or loss, direct, indirect, or incidental, resulting from the incorrect assembly, inadequate maintenance, improper use, or neglect of this product. NOTICE Keep these assembly instructions for future reference. Do not use this product if there are missing, damaged, or broken parts until repairs are made and/or factory replacement parts are installed.
ARMCHAIR PARTS E Washer x 14 F Bolt (M6 x 40mm) x 14 C A D B A ........Right Side ...............x 1 B ........Left Side..................x 1 C........Back ........................x 1 D........Seat ........................
ARMCHAIR ASSEMBLY - STEP 1 E F Washer x2 F Bolt (M6 x 40mm) x2 B C Attach Left Side (B) to Back (C) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
ARMCHAIR ASSEMBLY - STEP 2 E Washer x4 F Bolt (M6 x 40mm) x4 B D Attach Seat (D) to Left Side (B) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
ARMCHAIR ASSEMBLY - STEP 3 E F Washer x2 F Bolt (M6 x 40mm) x2 D C Attach Seat (D) to Back (C) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
ARMCHAIR ASSEMBLY - STEP 4 E Washer x6 F Bolt (M6 x 40mm) x6 A D C Attach Right Side (A) to Back (C) and Seat (D) with Washer (E) and Bolt (F) as shown. IMPORTANT: Fully tighten all bolts after this step is complete.
L CORNER PARTS E F Washer x 12 F Bolt (M6 x 40mm) x 12 B G H I B ........Left Side..................x 1 G .......Back ........................x 1 H........Seat ........................x 1 I .........Side Panel ..............
L CORNER ASSEMBLY - STEP 1 E Washer x2 F Bolt (M6 x 40mm) x2 B G Attach Left Side (B) to Back (G) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
L CORNER ASSEMBLY - STEP 2 E Washer x4 B F Bolt (M6 x 40mm) x4 H Attach Seat (H) to Left Side (B) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
L CORNER ASSEMBLY - STEP 3 E Washer x2 F Bolt (M6 x 40mm) x2 H G Attach Seat (H) to Back (G) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
L CORNER ASSEMBLY - STEP 4 E Washer x4 F Bolt (M6 x 40mm) x4 H I G Attach Side Panel (I) to Seat (H) and Back (G) with Washer (E) and Bolt (F) as shown. IMPORTANT: Fully tighten all bolts after this step is complete.
R CORNER PARTS E F Washer x 12 F Bolt (M6 x 40mm) x 12 A J K I A ........Right Side ...............x 1 J ........Back ........................x 1 K ........Seat ........................x 1 I .........Side Panel ..............
R CORNER ASSEMBLY - STEP 1 E Washer x2 F Bolt (M6 x 40mm) x2 A J Attach Right Side (A) to Back (J) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
R CORNER ASSEMBLY - STEP 2 E Washer x4 F Bolt (M6 x 40mm) x4 A K Attach Seat (K) to Right Side (A) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
R CORNER ASSEMBLY - STEP 3 E Washer x2 F Bolt (M6 x 40mm) x2 K J Attach Seat (K) to Back (J) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
R CORNER ASSEMBLY - STEP 4 E Washer x4 F Bolt (M6 x 40mm) x4 K I J Attach Side Panel (I) to Seat (K) and Back (J) with Washer (E) and Bolt (F) as shown. IMPORTANT: Fully tighten all bolts after this step is complete.
CHAIR PARTS E Washer x 10 F Bolt (M6 x 40mm) x 10 L M I L ........Back ........................x 1 M .......Seat ........................x 1 I .........Side Panel ..............
CHAIR ASSEMBLY - STEP 1 E F Washer x2 F Bolt (M6 x 40mm) x2 L M Attach Seat (M) to Back (L) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
CHAIR ASSEMBLY - STEP 2 E Washer x8 F Bolt (M6 x 40mm) x8 I L I M Attach Side Panels (I) to Seat (M) and Back (L) with Washer (E) and Bolt (F) as shown. IMPORTANT: Fully tighten all bolts after this step is complete.
TABLE PARTS E Washer x 12 F Bolt (M6 x 40mm) x 12 P Q N N O N .........Table Frt/Bck Panel .....x 2 O .........Side Panel .................x 2 P ........Glass Top ................x 1 Q .......Table Top Panel ......
TABLE ASSEMBLY - STEP 1 E F Washer x4 F Bolt (M6 x 40mm) x4 N N Q Attach Table Frt/Bck Panels (N) to Table Top Panel (Q) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
TABLE ASSEMBLY - STEP 2 E F Washer x8 F Bolt (M6 x 40mm) x8 N O N O Attach Side Panels (O) to Table Frt/Bck Panels (N) with Washer (E) and Bolt (F) as shown. IMPORTANT: Fully tighten all bolts after this step is complete.
TABLE ASSEMBLY - STEP 3 P Q Carefully position Glass Top (P) into place as shown while making sure the suction cups adequately grasp the Glass Top (P) bottom surface.
OTTOMAN PARTS E Washer x 12 F Bolt (M6 x 40mm) x 12 S R O O .......Side Panel .........................x 2 R........Ottoman Frt/Bck Panel ......x 2 S ........Ottoman Top Panel............
OTTOMAN ASSEMBLY - STEP 1 E F Washer x4 F Bolt (M6 x 40mm) x4 R R S Attach Ottoman Frt/Bck Panels (R) to Ottoman Top Panel (S) with Washer (E) and Bolt (F) as shown. Note: Do not fully tighten any bolts until assembly is complete. Failure to follow these instructions may cause the bolt holes to be misaligned during assembly.
OTTOMAN ASSEMBLY - STEP 2 E F Washer x8 F Bolt (M6 x 40mm) x8 O R R O Attach Side Panels (O) to Ottoman Frt/Bck Panels (R) with Washer (E) and Bolt (F) as shown. IMPORTANT: Fully tighten all bolts after this step is complete.
CONFIGURATIONS Your patio set includes connectors that allow you to customize the layout of your pieces. To use the connectors, simply place them over the adjoining frames as shown above.
ADDITIONAL CONFIGURATIONS Sofa with Chaise Chaise Lounge L Corner + Chair + R Corner + Ottoman Ottoman + Chair Loveseat Chaise Lounge with Arms L Corner + R Corner Ottoman + Armchair
ASSEMBLY COMPLETE Place seat cushions and back pillows into position.