Datasheet

PRODUCT INFORMATION
UNITRONIC® BUS EIB / KNX
Use in building automation for control of lighting, heating, air-conditioning, time management, etc. temperature range from
-30°C bis +70°C
Info
EIB / European Installation Bus
KNX/communication in building management
CPR: Article number choice under www.lappkabel.com/cpr
Halogen-free
Application range
The product is designed for use in building management, e.g. for decentralised control of lighting, heating, air-conditioning,
ventilation, energy management, blinds, time management, locking systems etc.
The cable can be laid on or under plaster; in pipes, cable ducts; in dry, damp or wet environments.
EIB installation mainly consists of sensors/command-transmitters (e.g. light barriers, switches, thermostats, infrared, wind
meters, timers), and actuators (e.g. engines, heaters, ventilators, lights, blinds).
KNX technology was formed from the merging of three established European bus standards: EIP, EHS (household appliances
and consumer electronics) and Batibus (heating/ventilation/air conditioning)
Product features
Serial data transmission
EIB cable has been tested at 4 kV (1 min.) in a water bath
Product Make-up
Screened installation cable based on type J-Y(ST)Y according to DIN VDE 0815
UNITRONIC® BUS EIB
Bare solid copper wire
2x2x0,8: red and black, white and yellow
Core insulation: PVC
Overall aluminum foil
Outer sheath: PVC, green (RAL 6017)
UNITRONIC® BUS EIBCOMBI
Bare solid copper wire
Core insulation: PVC
2x2x0,8: red und black, white and yellow
3x1,5: brown, blue, green/yellow
Overall aluminum foil
Last Update (18.10.2019) 1 / 3
©2019 Lapp Group - Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet.
PN 0456 / 02_03.16