Datasheet

ManualsBrandsLapp ManualsA/VField Bus Cable ASI Bus Rubber 1x2x1.5mm² Yellow 50m

PRODUCT INFORMATION

UNITRONIC® BUS ASI

AS-INTERFACE cables for networking systems in the field

Communication at sensor/actuator level. Halogen free (rubber), UL-approval (PVC), oil resistant (TPE). Temperature range from

-40°C bis +90°C

Info

"LD” = Long Distance

Supplementary automation components from Lapp

Mechanical and plant engineering

Good chemical resistance

Halogen-free

Temperature-resistant

Benefits

The new BUS ASI LD 2 x 2.5 (Long Distance) allows even modules located further away to be connected.

AS-I power supplies can be reduced. The BUS ASI LD is downwards-compatible with version 1.5.

The rubber versions are halogen-free

Application range

Communication at sensor/actuator level

Sensor-/actuator wiring

For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load

The TPE version has an oil-resistant outer sheath. It is suitable for wet areas, in particular in conjunction with water-soluble

cooling lubricants.

Last Update (08.10.2019) 1 / 4

Product Management www.lappkabel.de

You can find the current technical data in the corresponding data sheet.

PN 0456 / 02_03.16

Summary of content (4 pages)

PAGE 1
PRODUCT INFORMATION UNITRONIC® BUS ASI AS-INTERFACE cables for networking systems in the field Communication at sensor/actuator level. Halogen free (rubber), UL-approval (PVC), oil resistant (TPE). Temperature range from -40°C bis +90°C Info "LD” = Long Distance Supplementary automation components from Lapp Mechanical and plant engineering Good chemical resistance Halogen-free Temperature-resistant Benefits The new BUS ASI LD 2 x 2.
PAGE 2
PRODUCT INFORMATION UNITRONIC® BUS ASI Product features Data and power are transmitted via an unscreened, geometrically coded two-core flat cable (protection against polarity reversal). The conductor is contacted by "piercing technology" within the ASI modules. The sensors are connected to the ASI modules (coupling modules) using round cables (connection cables). Norm references / Approvals ASI is standardised Europe-wide in EN 50295 and internationally in IEC 62026-2.
PAGE 3
Powered by TCPDF (www.tcpdf.org) Article designation Outer sheath colour Application Number of cores and mm² per conductor Copper index (kg/km) Weight (kg/km) 2170228 UNITRONIC® BUS ASI (G) yellow Data and power transmission 2 x 1.5 29 85 2170229 UNITRONIC® BUS ASI (G) black Transmission of 30 V DC 2 x 1.5 auxiliary power 29 85 2170371 UNITRONIC® BUS ASI LD (G) yellow Data and power transmission 2 x 2.
PAGE 4
Powered by TCPDF (www.tcpdf.org) PRODUCT INFORMATION UNITRONIC® BUS ASI Last Update (08.10.2019) ©2019 Lapp Group - Technical changes reserved Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02_03.