Data Sheet

ManualsBrandsLAPP ManualsCable AccessoriesThermal transfer printer

U.I. Lapp

GmbH

DATA SHEET

FLEXIMARK

Thermoprint A4+M /300

DB 83259602EN

valid from: 01.04.2010

Originator: C. Lutz / PPM

approved: R. Drotleff / PDP

Document: DB83259602EN page 1 of 4

PD 0019/2.1_11.09EN

General description

Perfect for industrial marking. The thermal transfer printing

method increases the smudge and scratch resistance of

the printed surface and provides increased resistance to

oils and chemicals as well. For printing many different

labels such as self-adhesive labels for equipment labelling

(TA), cable markers (TCK) and shrink tubes.

The FLEXIMARK® Thermoprint A4+M/300 is build for

uncompromising permanent operation and for high printing

volumes. The Thermal transfer print is used for several

applications. Every specific customer demand can be

implemented due to the large periphery and software.

Different designs, in many languages, in black and white, in

color, with or without barcode – each label is printed by

the label marking printer as desired, in the right quantity

and without any mistake.

Product features

No adjustment of the print head for different widths of material.

Printing on very narrow or very thick continuous materials.

The gap height at the material sensor for flat tubes and synthetic tapes is up to 4 mm.

The print speed for difficult printable materials is specified to 30-125 mm/sec.

• Material guide: centred material position - the material is inserted centre aligned. Precise printing due to the

material guide located directly behind the print roller. The width is adjusted with a spindle.

• Ribbon retainer: Easy and centred insertion of the ribbon with the threepart tightening axles. Due to the

imprinted spacer positioning of the ribbon is facilitated.

• Label retainer: The labels are inserted into the label retainer and adjusted automatically by fitting with the

margin stops.

• Operating mode: Stand-alone operation, PC-application or network.

Technical data

Print head

Printing method: Thermal transfer- or Thermal direct-print

Print speed: Up to 125 mm/s

Print width: Up to 105,6 mm

Print resolution: 300 dpi

Material guidance: Central material guide

Material

Labels, continuous rolls or fan-folded: Paper, cardboard, textile, Synthetics like PET, PE, PP, PVC, PU,

Acrylat, PU

Material thickness: 0,055 – 1,2 mm

Labels width: 4 – 106 mm

Shrinking tube width: 3,5 – 110 mm

Max. Roll- core diameter ∅ : 38 – 100 mm

Material weight: 60 – 300 g/m²

Width of liner or of continuous material: 10 – 110 mm

Label height: 5 – 1000 mm

Max. total diameter of media roll: 205 mm

Summary of content (4 pages)

PAGE 1
U.I. Lapp GmbH DATA SHEET FLEXIMARK® Thermoprint A4+M /300 DB 83259602EN valid from: 01.04.2010 General description Perfect for industrial marking. The thermal transfer printing method increases the smudge and scratch resistance of the printed surface and provides increased resistance to oils and chemicals as well. For printing many different labels such as self-adhesive labels for equipment labelling (TA), cable markers (TCK) and shrink tubes.
PAGE 2
U.I. Lapp GmbH DATA SHEET FLEXIMARK® Thermoprint A4+M /300 Ribbon Ink: Roll diameter: Core diameter: Ribbon length: Width: Outside or inside Up to 80 mm Up to 25 mm variable up to 500 m Up to 114 mm Dimensions of the printer width: height: Depth: weight: 242 mm 274 mm 446 mm 9,0 kg Electronics Processor: RAM: Memory IFFS: Slots: Battery cache for: Warning signal: Settings Settings: Monitoring Stop printing if: On the display: Originator: C. Lutz / PPM approved: R. Drotleff / PDP valid from: 01.04.
PAGE 3
U.I. Lapp GmbH DATA SHEET FLEXIMARK® Thermoprint A4+M /300 Test routines System diagnosis: Short status, status print: Status reports: Fonts Font types: DB 83259602EN valid from: 01.04.2010 when switched on with testing of print head font list, device list, WLAN state, profile of label, test grid, monitor mode, PPP state Extensive status print with information about setting, e.g. print length counter, runtime counter etc., Request of machine state via software command.
PAGE 4
U.I. Lapp GmbH DATA SHEET FLEXIMARK® Thermoprint A4+M /300 DB 83259602EN valid from: 01.04.2010 Interfaces 1 RS232C interface 2 USB 2.0 Slave-interface 3 Ethernet 10/100 Base T-interface with TCP/IP 4 Slot for Wireless LAN-Wifi-card. 5 Two USB-Master-interfaces to connect an external operation panel, keyboard, scanner or Service Key. 6 Slot for memory card CompactFlash Type I. Scope of delivery • FLEXIMARK® Thermoprint A4+M/300 • Operation manual • Marking software FLEXIMARK® Software 10.