Data Sheet

U.I. Lapp
GmbH
DATASHEET
FLEXIMARK® Cable label LFL
83254765
14.11.2013
PN 0486/01_03.10
FLEXIMARK® Cablelabel LFL for marking cables with cable ties (one- or two sided fastening possibility). Text can be printed on
the labels with our marking software and commercial laser printers.
Good chemical resistance
Halogen-free
UV-resistant
Info
LFL2H 9,9-26 contained in FLEXIMARK® sample bag (article number M3251010)
Application range
For Cable Marking
Printing with commercial laser printers
Printing with FLEXIMARK® Software (Download: http://www.lappkabel.com/service/downloadcenter/markingsystem/marking-
software.html)
Benefits
Can be mounted directly on the cable together with plastic cable ties
No character holder necessary
Printable on both sides
Resistant to chemicals, UV-radiation, moisture and some oils
Diverse criteria as ageing resistance and chemical resistance are tested by the independent SP Technical Research Institute of
Sweden according to SP 2171 Test Method (see selection table A15)
Design
One (LFL1H) or two-sided (LFL2H) fastening with cable ties (up to 4.5 mm in width)
Note
Insert sheet in manual paper feed compartment
Use of original toner is recommended
Optimum printing results from laser printers are achieved with straight sheet feed-in with no deflection over rollers and little heat
build-up
Included
A5 and A4 label sheets for laser printers
Product Management Document: FLEXIMARK® Cable label LFL
1 / 2
©2012 Lapp Group - Technical changes reserved
Photographs are not to scale and do not represent detailed images of the respective products.