Data Sheet
Lapp Mobility GmbH
Oskar-Lapp-Str. 2 · D-70565 Stuttgart
Phone: +49 711 7838 - 04
Fax: +49 711 7838 - 3520
www.lappmobility.com
MOBILITY DOCK
THE MOBILITY DOCK, 10 A, 1-PHASE MODE 2 CHARGER
FROM LAPP is a mobile charging device specially designed
for charging on the move. Connected to a standard house-
hold socket, it enables electric and plug-in hybrid cars to
be charged easily and safely anywhere. The existing
mode3 charging cable is effortlessly connected between
the car and the MOBILITY DOCK, which is then connected
to the mains power. As well as the actual charging process,
the MOBILITY DOCK has a range of protection functions,
including essential overcurrent and excess temperature
monitoring and protection for the user.
• Mobile charging device for use with a standard
domestic power socket
• 100% user friendly and intuitive
• Compact design and ergonomic, easy handling
• Space saving storage in boot
• Charging process starts automatically when requested
by the car
• Meets all relevant requirements of the product
standard IEC62752
• Protection rating IP44
ITEM NO.: 5555925000 | MODE 2 CHARGER, 10 A, 1-PHASE,
FOR CHARGING ELECTRIC AND HYBRID CARS
ADVANTAGES AT A GLANCE
TECHNICAL INFORMATION
• Mode 2 charging mode in compliance with
IEC 61851
• In-cable control and protection device in
compliance with IEC62752
• CE-compliant - meets all stipulations of the
applicable standards
• Type E/F power connector
(charging current 10A1-phase)
• Socket for mode 3 charging cable
(IEC62196)
• Protection rating IP44 (connected IP44)
• Charging capacity up to 2.3kW,
automatically adjusting
• Weight 750 g
• Dimensions (H x W x D):
255 mm x 135 mm x 65 mm
• Ambient temperature -25°C to +45°C
SAFETY FUNCTIONS
• Self-test on start
• Residual current detection (DC) - provides
effective protection against DC faults, so
that upstream type A RCDs do not become
blind
• Residual current detection (AC) -
immediately disconnects in the event of
potentially fatal AC faults
• Charge monitoring to vehicle
• Continuous protective earth
• Relay monitoring
• Overcurrent detection
• Over and undervoltage detection
• IC-CPD and power connector - Safe
charging thanks to disconnection and
regulation of charging capacity in case of
overheating.
• Protection rating IP44 (charger),
IP44 (connector/coupling)
• Halogen-free
• Flame-retardant
• Oil-resistant
ELECTRICAL DATA
• Charging capacity up to 2.3kW
• Nominal voltage 230V
• Nominal current 10A, 1-phase
• Frequency 50Hz
• Residual current device (RCD) ≤ 30mA AC,
≤ 6mA DC
INCLUDED IN DELIVERY
• Charger with type 2 coupling and type
E/F power connector including cap
• Operating instructions
KEY FEATURES
• Support on housing extendable using push
button for support on the wall
• Easy disconnection of charging cable after
completion of charging using release lever
• Use with the mode 3 charging cable
already available in the car
• Gyro sensor in housing for position
monitoring
• LED display in housing